Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 6 of 6

Thread: Dm 800 hd

  1. #1
    Special Member Teacher
    Join Date
    Dec 2008
    Location
    Romania
    Posts
    301
    Posts Thanks / Likes

    Default Dm 800 hd

    Imi cer scuze daca mai exista pe forum informatia pe care doresc sa va rog sa mi-o oferiti si anume, daca se poate instala IMG. pe un DM 800 HD, direct de pe stick...!

  2. #2
    Moderator Expert
    Join Date
    Jul 2006
    Location
    blowfish me....
    Posts
    2,472
    Posts Thanks / Likes

    Default

    nu direct de pe stick nu e echosmart)))
    eventual pe stick aika sa maresti flasul sa stie mai multe imagini

  3. #3
    Special Member Teacher
    Join Date
    Dec 2008
    Location
    Romania
    Posts
    301
    Posts Thanks / Likes

    Default

    Multumesc mult @sinangel! Respecte!

  4. #4
    Special Member Teacher
    Join Date
    Dec 2008
    Location
    Romania
    Posts
    301
    Posts Thanks / Likes

    Default

    @sinangel! As fi mai mult decat recunoscator, daca mi-ai spune pasii ce trebuie urmati pt a instala img pe un DM 800HD! Mc anticipat!

  5. #5
    Junior Member Teacher
    Join Date
    Jun 2007
    Location
    26.12°E / 44.42°N
    Posts
    473
    Posts Thanks / Likes

    Default

    asa se instaleaza o imagine pe dm800

    in cazul in care montezi si un stick usb, poti instala pluginul Barry Allen, ceea ce inseamna level-up, iar din acel moment poti instala orice imagine pe stick sau in flash fara sa mai ai nevoie de procedura de la primul paragraf
    acest lucru este foarte util pentru cei ce folosesc o conexiune wireless

  6. #6
    Senior Member Expert
    Join Date
    Apr 2006
    Posts
    1,272
    Posts Thanks / Likes

    Default

    1
    DM 800
    Flashing a new firmware (image) by Browser
    What you need to flash
    You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
    images like *.img files. Don't try it - it won't work.
    You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
    like HyperTerm.
    You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
    you need a cross cable, if you connect trough a switch/hub/router you need a normal
    (non-cross) cable.
    To flash a new image, you can use the second stage loader. It must be present and not broken.
    The following steps assume you have a DHCP server. If you don't have one, you have to setup
    an IP address in the bootloader's serial setup.
    - Power down the Dreambox, either using "shutdown" and by removing the power connector.
    Standby is not enough!
    - (1.) Press and hold the power button. Replug the power connector into the Dreambox.
    - (3.) A text "*** STOP ***" should appear. Now you can release the button.
    The bootloader entered the "waiting" mode.
    - (4.) Above the "*** STOP ***" text, there should appear an IP-address
    (four decimal values with a dot in between). If there appears the string "dhcp" instead,
    the box still searches for a DHCP server. Wait a bit. If it doesn't change, something doesn't
    work with the DHCP server. Check wether network cable is plugged in etc. If it just doesn't
    work, set an IP using the serial terminal).



    2
    Now, open a browser on your PC.
    (1.) enter in the address line "http://ip/" (where ip must be replaced with the value in the LCD).



    (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.
    3
    On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi"
    extension.
    You can't flash other images (like .img)!
    - Click on "FLASH!" and wait. It might take some time to upload and flash the image.
    - Switch the box off again, and on again. The new image should be flashed and working.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top