Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 3 of 3
  1. #1
    Moderator Expert
    Join Date
    Jan 2006
    Location
    Africa-Kenya-Nbi
    Posts
    3,108
    Posts Thanks / Likes

    Default Dsd 960, 977, 720 Decoders


    Need to change this model of I*rdeto decoders for any use like FTA.
    any ideas are welcome for I have many used, and need some use to convert them to, instead of door stoppers.

  2. #2
    Junior Member Master
    Join Date
    Dec 2006
    Location
    Eldoret, kenya
    Posts
    65
    Posts Thanks / Likes

    Default

    Quote Originally Posted by cogil View Post
    Need to change this model of I*rdeto decoders for any use like FTA.
    any ideas are welcome for I have many used, and need some use to convert them to, instead of door stoppers.
    Hi Sir Cogil, yes but on Intelsat 7/10 only. Have a look at this :-

    SETUP Free Channels on South African DSTV decoders, MODELS: DSD 660, 720i, 910, 980, 990 only. NOT for Duel View

    Press “Menu” move down to “Advance Options” andpress “OK”.
    Press “OK” on “Dish Installation” enter PIN“9949’.
    Move to “Network 2” and change to “DSTV Pas7”and press OK.
    Move down to Frequency, press OK and enter“12722”, press OK.
    Move down to Symbol Rate, press OK and enter“26652”, press OK Move down to FEC and to change to “˝”.
    Move down to Polarization and change toVertical.
    Move down to NIT and change to “NO”.
    Move down to accept these changes and press OKto save changes.
    Move to “Network 3” and change to “DSTV Pas7”and press OK.
    Move down to Frequency, press OK and enter“12684”, press OK.
    Move down to Symbol Rate, press OK and enter“26652”, press OK.
    Move down to FEC and to change to “˝”.
    Move down to Polarization and change to Horizontical.
    Move down to NIT and change to “NO”.
    Move down to accept these changes and press OKto save changes.
    Move to “Scan All Networks” and press OK.
    When DSTV channels re-appears press the “TV”button on the remote and go to the public bouquet and press OK.

    If “HOPE CHANNEL” (stronger signal) or “3ABN”(weaker signal) does not appear in the list you might have to set the LNB to9750 & 10600.
    If that does not help set it back to where it was, then your dish is slightly out and has to be re-aligned. (re-tuned).
    People have tried to do this with DSTV decoders, it works,but it only keeps the parameters for a couple of weeks then it looses it! So DSTV does not like their decoders to be used what it is NOT intended for.
    The weak can never forgive. Forgiveness is the attribute of the strong.

  3. #3
    Moderator Expert
    Join Date
    Jan 2006
    Location
    Africa-Kenya-Nbi
    Posts
    3,108
    Posts Thanks / Likes

    Default


    Thanks Lagat for this info, I only thought there could be a change to any sat like the FTA decoders.
    This can also help to watch the christian channels on pas 7,10.
    and would get some revenue will try that strategy.Just have too many of them, plus used C band lnbs if you need some.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top