Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 23
  1. #1
    Modest Member Teacher
    Join Date
    Nov 2006
    Posts
    138
    Posts Thanks / Likes

    Unhappy Hop 0 pt 1-2 min , apoi HOP 1 sau 2

    Ridic o intrebare pt cunoscatori.

    DM-7025+, CCcam 2.0.11 , in local un diabetic.

    La schimbarea canalului deschide din local iar dupa un minut, acceseaza distantele 1 si 2 .

    In config am:

    SMARTCARD WRITE DELAY: /dev/sci0 4000
    SMARTCARD CLOCK FREQUENCY: /dev/sci0 6500000

    NU gasesc explicatia. Pe DM500s mergea fara probleme cu acelasi config.

    Multumesc in avans.


  2. #2
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    Quote Originally Posted by celenhein View Post
    Ridic o intrebare pt cunoscatori.

    DM-7025+, CCcam 2.0.11 , in local un diabetic.

    La schimbarea canalului deschide din local iar dupa un minut, acceseaza distantele 1 si 2 .

    In config am:

    SMARTCARD WRITE DELAY: /dev/sci0 4000
    SMARTCARD CLOCK FREQUENCY: /dev/sci0 6500000

    NU gasesc explicatia. Pe DM500s mergea fara probleme cu acelasi config.

    Multumesc in avans.
    Nu ai nevoie de astea:
    #SMARTCARD WRITE DELAY: /dev/sci0 4000
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6500000
    incearca cu CCcam2.0.9




  3. #3
    Modest Member Teacher
    Join Date
    Nov 2006
    Posts
    138
    Posts Thanks / Likes

    Default Cu 2.0.9 not ok

    Quote Originally Posted by Didi View Post
    Nu ai nevoie de astea:
    #SMARTCARD WRITE DELAY: /dev/sci0 4000
    #SMARTCARD CLOCK FREQUENCY: /dev/sci0 6500000
    incearca cu CCcam2.0.9
    Mersi de info.

    Am pus 2.0.9 si nu pare sa fie ok. Fenomenul e identic.
    Inclusiv am comentat cele 2 linii.
    Problema e inca in picioare.



  4. #4
    Banned
    RDI - Board Banned Avatar

    Join Date
    Apr 2003
    Posts
    28
    Posts Thanks / Likes

    Default

    Intreaba-l pe Fanta . Se pricepe la Dreamboxuri .

  5. #5
    Modest Member Teacher
    Join Date
    Nov 2006
    Posts
    138
    Posts Thanks / Likes

    Default

    Quote Originally Posted by ********* View Post
    Intreaba-l pe Fanta . Se pricepe la Dreamboxuri .
    Merci de info.


  6. #6
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Activeaza debug-ul si vezi in log ce se intampla.
    Probabil cardul tau raspunde mai greu decat un altul din retea, dar raspunsul o sa-l vezi in log.

  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2006
    Location
    Cluj-Napoca
    Posts
    338
    Posts Thanks / Likes

    Default

    La mine rezolvarea a fost newcs+mpcs+cccam. 1% tot i-l mai apuca decodatu din retea..dar in rest e ok.
    DM800 HD PVR, IPBOX900HD, DM500, OPTIBOX500, Antena Aluminiu 1,2, Multifocus 1,1

  8. #8
    Senior Member Expert
    Join Date
    May 2003
    Location
    Dreambox-800
    Posts
    1,887
    Posts Thanks / Likes

    Default

    poate este ceva problema in Dreambox la retea incearca cu alta imagine poate se rezolva daca nu este hardware.... Baftä

  9. #9
    Unemployed Expert
    RDI - Board Default Avatar

    Join Date
    Jan 1970
    Location
    BeneluX
    Posts
    1,329
    Posts Thanks / Likes

    Default

    incearca fara retea, numai cardul local
    vezi ce se intampla in log ( dupa ce ai activat debug mode)
    baFTA
    un server câteva receivere si ceva pasiune...

  10. #10
    Modest Member Teacher
    Join Date
    Nov 2006
    Posts
    138
    Posts Thanks / Likes

    Thumbs down Bad, Bad, Bad, ...

    Quote Originally Posted by cristinel View Post
    incearca fara retea, numai cardul local
    vezi ce se intampla in log ( dupa ce ai activat debug mode)
    baFTA
    Problema e identica pe toate imaginile care le-am incercat.
    Are vreo legatura pt ca folosesc Barry Allen pt a testa imaginile?
    Se pastreaza cumva niste "settings-uri" comune pt toate imaginile si de aceea se manifesta problema identic?

    A prioritiza cardul inaintea net-ului e o solutie? (ma rog daca se poate face din CCcam.prio... Un ghid mai pt incepatori pt CCCam.prio cred ca mi-ar fi util, ce am gasit expica cum se configureaza, cum se face, dar din pacate nu explica nimeni cum trateaza CCcamul fisierul ca sa il pot adapta pt mine)

    iar in debug mode nu am ce sa vad ...

    Dupa CCcam -dv se opreste la :

    "
    17:52:25.940 CCcam: online using nodeId xxxxxxxxxxxxxxxxx
    17:52:25.988 CCcam: dvb api3 detected
    17:52:25.992 CCcam: DM7025 detected
    17:52:25.994 CCcam: create 8 cam device(s)
    17:52:26.329 CCcam: card detect fail
    17:52:26.331 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
    17:52:26.332 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
    17:52:26.333 CCcam: static cw not found or bad
    17:52:26.347 CCcam: parsed 27 entries from /var/etc/CCcam.prio
    17:52:26.546 CCcam: added 1292 provider names from /var/etc/CCcam.providers
    17:52:33.299 CCcam: added 7904 channel names from /var/etc/CCcam.channelinfo
    17:52:33.301 CCcam: server started on port 12000
    17:52:36.772 CCcam: failed to get address for xxxxxxxxxxxxxx
    17:53:00.473 CCcam: no working cam devices, no need to start pmthandler
    ....si gata..

    Numai stiu ce sa mai cred ...

    Multumiri in avans pt clarificare ...


  11. #11
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Posteaza aici CCcam.cfg, fara linii, normal.

  12. #12
    cu state vechi in meserie Expert
    Join Date
    Dec 2004
    Posts
    2,794
    Posts Thanks / Likes

    Default

    dupa cum se vede in log cardul tau nu este detectat zice acolo card detect fail, deci mie greu sa cred ca ia de pe local 1-2 minute.
    2XRCS DigiTV (2xrec+2xsmasrtcard(extra1)+antena+LNB), DK-1102 Offset 1,2 DM800


  13. #13
    Senior Member Expert
    Join Date
    Oct 2005
    Posts
    1,388
    Posts Thanks / Likes

    Default

    Pentru prio: cu atribut755 si pus sus in lista
    P: 092F:000000 # Dolce
    ------------------------------
    Pentru cccam.cfg este de preferat sa bagi cardul in slotul de jos
    Daca ai 2 carduri cum am eu activezi ambele.
    Mentionez fara configuratia respectiva nu-mi vedea cardul ( cw ) in slotul de sus.

    CARD READER /dev/sci0
    #CARD READER /dev/sci1

  14. #14
    Senior Member Expert
    Join Date
    May 2003
    Location
    Dreambox-800
    Posts
    1,887
    Posts Thanks / Likes

    Default

    Incearcä cu o imagine originalä de la DMM si daca are cineva cccam-ul pe care il instalezi de pe windows in orice receptor Dreambox si la orice imagine sä-l puna pe rapidshare daca nu mai astepti pina maine searä cind ajung acasä si il uploadez eu...

  15. #15
    Modest Member Teacher
    Join Date
    Nov 2006
    Posts
    138
    Posts Thanks / Likes

    Default CCcam.cfg

    Quote Originally Posted by SatWien View Post
    Posteaza aici CCcam.cfg, fara linii, normal.
    @Stailus - Crede-ma ca in infobar imi arata "/dev/sci0 (0,092) " , In concluzie mi-l vede.
    Uite si Entitlements :

    card reader /dev/sci0
    handled 10(9) ecms and 0(0) emms
    Nds card xxxx

    Entitlement info
    006e xx-xx-xx02
    008c xx-xx-xx02
    00c8 xx-xx-xx02
    0ff3 xx-xx-xx02


    card reader /dev/sci1
    no or unknown card inserted

    card reader /dev/sci2
    no or unknown card inserted



    @SATWIEN - Asta e configu fara linii:

    ###############################################
    #### Config ####
    ###############################################
    # SERVER LISTEN PORT : #
    SERVER LISTEN PORT : 12000
    # ALLOW TELNET INFO : #
    ALLOW TELNETINFO: yes
    # ALLOW WEB INFO : #
    ALLOW WEBINFO: yes
    # WEBINFO USERNAME : #
    WEBINFO USERNAME :
    # WEBINFO PASSWORD : #
    WEBINFO PASSWORD :
    # TELNETINFO USERNAME : #
    TELNETINFO USERNAME :
    # TELNETINFO PASSWORD : #
    TELNETINFO PASSWORD :
    # TELNET INFO LISTEN PORT : #
    TELNETINFO LISTEN PORT : 16000
    # WEB INFO LISTEN PORT : #
    WEBINFO LISTEN PORT : 16001
    # ZAP OSD TIME : #
    ZAP OSD TIME :3
    # OSD USERNAME : #
    OSD USERNAME :root
    # OSD PASSWORD : #
    OSD PASSWORD :dreambox
    # OSD PORT : #
    OSD PORT :80
    # SERIAL READER : #
    # SMARTCARD WRITE DELAY : #
    SMARTCARD WRITE DELAY: /dev/sci0 4000
    # SMARTCARD CLOCK FREQUENCY #
    SMARTCARD CLOCK FREQUENCY: /dev/sci0 7000000
    # EMM Blocker #
    # SHOW TIMING : #
    SHOW TIMING : yes
    # DEBUG : #
    DEBUG : yes
    # NEWCAMD CONF : #
    NEWCAMD CONF :no
    # DISABLE EMM : #
    DISABLE EMM : no
    # EXTRA EMM LEVEL : #
    EXTRA EMM LEVEL : yes
    # Mini OSD #
    MINI OSD : yes
    # CAM KEY #
    # CAMDATA #
    BOXKEY: /dev/sci0 0A XX XX XX
    # BEEF ID : #
    # PIN : #
    PIN: /dev/sci0 0000
    # SOFTKEY FILE : #
    SOFTKEY FILE : /var/keys/SoftCam.Key
    # AUTOROLL FILE : #
    AUTOROLL FILE : /var/keys/AutoRoll.Key
    # STATIC CW FILE : #
    STATIC CW FILE : /var/etc/costant.cw
    # CAID PRIO FILE : #
    CAID PRIO FILE : /var/etc/CCcam.prio
    # LOG WARNINGS : #
    # PROVIDERINFO FILE : #
    PROVIDERINFO FILE : /var/etc/CCcam.providers
    # CHANNELINFO FILE : #
    CHANNELINFO FILE : /var/etc/CCcam.channelinfo
    # #
    # LOADBALANCE : #
    # TRY ALL CHIDS : #
    # POSTINIT : #
    # DVB API : #
    # #
    ###############################################
    ####### Enjoy #######
    ###############################################


 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top