Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 17
  1. #1
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Question Smargo Smartreader nou

    De curand mi-a sosit Smargo Smartreader-ul....sa nu fac vreo greseala in programarea lui cer ajutorul celor mai priceputi !
    -vreau sa-l folosesc ca reader a unei cartele Pink (in Ir***o,16°,in dream 500 func.numai cu Scam..)
    -sa functioneze in CCcam sharing (cu alte combinatii pana in prezent nu au dat rezultate....asta e ultima incercare!)
    -am un dream 7025+,cu img nabilo BlackHole_07(daca e nevoie o schimb)

    Va multumesc anticipat..!

  2. #2
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    1. Am compilat un how-to din mai multe surse plus observatiile mele, il gasesti aici: http://rdi-board.com/showthread.php?t=82134;
    2. Inteleg ca vrei sa pui Smargo pe 7025?
    3. Cand spui ca nu merge, la ce referi? Vede cardul dar nu decodeaza sau nu-l vede deloc?
    4. Cititorul e vazut de server?

    Probabil nu ai instalat driverele pentru smargo in 7025. Descarca pachetul din thread-ul de mai sus si vezi ca ai in arhiva instructiuni de instalare. Am auzit ca ar exista imagini pentru 7025 cu driverele deja instalate dar nu stiu care sunt alea, nu am 7025 ca sa verific.

  3. #3
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Smile update

    Quote Originally Posted by SatWien View Post
    1. Am compilat un how-to din mai multe surse plus observatiile mele, il gasesti aici: http://rdi-board.com/showthread.php?t=82134;
    2. Inteleg ca vrei sa pui Smargo pe 7025?
    3. Cand spui ca nu merge, la ce referi? Vede cardul dar nu decodeaza sau nu-l vede deloc?
    4. Cititorul e vazut de server?

    Probabil nu ai instalat driverele pentru smargo in 7025. Descarca pachetul din thread-ul de mai sus si vezi ca ai in arhiva instructiuni de instalare. Am auzit ca ar exista imagini pentru 7025 cu driverele deja instalate dar nu stiu care sunt alea, nu am 7025 ca sa verific.
    Am descarcat pachetul ..multumesc e bine dotat.!am sa ma apuc in curand de lucru!
    Ca nu merge ...am vrut sa spun ca ..:apare ca cartela necunoscuta si nu decodeaza!Am incercat mai multe alternative de CCcam..+config.si nu-l recunostea .....apoi cineva mi-a sugerat ca ar fi posibil cu un card reader ,..asa am ajuns la aceasta varianta!

  4. #4
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Angry Nu am reusit

    Sant terminat, ma dau batut ...nu am reusit sa fac nimic..smartreaderul nu este recunoscut de dream ,am instalat si dezinstalat toata noaptea ...ce trebuie sa scriu in config cccam sa activeze Smargo..?si cu ce comanda in telenet pot vedea daca treiberul e corect instalat...?

  5. #5
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Pune asta in CCcam.cfg

    SERIAL READER : /dev/ttyUSB0 smartreader+
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000


    Vezi ca asta inseamna ca frecventa e setata la 3.57 MHz, poti sa o cresti in functie de cardul tau.

    Eventual posteaza aici tot cccam.cfg, sa nu mai fie si altceva setat aiurea. Asta presupunand ca driverele pentru smargo sunt instalate.

  6. #6
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Angry ceva nu e bine!

    Quote Originally Posted by SatWien View Post
    Pune asta in CCcam.cfg

    SERIAL READER : /dev/ttyUSB0 smartreader+
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000


    Vezi ca asta inseamna ca frecventa e setata la 3.57 MHz, poti sa o cresti in functie de cardul tau.

    Eventual posteaza aici tot cccam.cfg, sa nu mai fie si altceva setat aiurea. Asta presupunand ca driverele pentru smargo sunt instalate.



    #### Config ####
    ###############################################
    # SERVER LISTEN PORT : #
    #SERVER LISTEN PORT : 12000
    # INFO LISTEN PORT : #
    #INFO LISTEN PORT : 16000
    # HTML INFO LISTEN PORT : #
    #HTML INFO LISTEN PORT : 16001
    # ZAP OSD TIME : #
    #ZAP OSD TIME :0
    # OSD USERNAME : #
    #OSD USERNAME :******
    # OSD PASSWORD : #
    #OSD PASSWORD :******
    # PHOENIX READER PATH : #
    # EMM Blocker #
    # SHOW TIMING : #
    #SHOW TIMING : no
    # DEBUG : #
    #DEBUG : no
    # NEWCAMD CONF : #
    #NEWCAMD CONF :no
    # DISABLE EMM : #
    #DISABLE EMM : yes
    # EXTRA EMM LEVEL : #
    #EXTRA EMM LEVEL : no
    # BOX KEY #
    # BEEF ID : #
    # PINCODE : #
    # SOFTKEY FILE : #
    #SOFTKEY FILE : /var/keys/SoftCam.Key
    # AUTOROLL FILE : #
    #AUTOROLL FILE : /var/keys/AutoRoll.Key
    # STATIC CW FILE : #
    #STATIC CW FILE : /var/keys/constant.cw
    # CAID IGNORE FILE : #
    #CAID IGNORE FILE : /var/keys/CCcam.ignore
    # LOG WARNINGS : #
    # LOG WARNINGS : /tmp/warnings.txt
    # #
    #################################################
    #SERVER LISTEN PORT : 12000
    #ALLOW WEBINFO: yes
    #SHOW EXTENEDED CLIENT INFO : yes
    #WEBINFO USERNAME : ******
    #WEBINFO PASSWORD : ******
    #WEBINFO LISTEN PORT : 16001
    #ZAP OSD TIME : 3
    #EXTRA EMM LEVEL : yes
    #EMM THREADS : 2
    #OSD USERNAME : ******
    #OSD PASSWORD : ******
    #SERIAL READER : /dev/tts/0 smartreader+
    #TRY ALL CHIDS : /dev/tts/0
    #SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6860002
    ################################################## ####
    #CAMKEY : /dev/sci2 00 00 00 00 00 00 00 00
    ################################################## ####
    #SERIAL READER : /dev/ttyUSB0 smartreader+
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
    #CAMKEY: /dev/ttyUSB0 00 00 00 00 00 00 00 00
    #CAMDATA: /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    #TRY ALL CHIDS : /dev/ttyUSB0
    ################################################## ##
    SERIAL READER : /dev/ttyUSB0 smartreader+
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000
    ################################################## ##

    astea sant conf.incercate de mine......driverele le-am instalat si manual si prin update....are ceva smartreaderul.?

  7. #7
    cu state vechi in meserie Expert
    Join Date
    Dec 2004
    Posts
    2,794
    Posts Thanks / Likes

    Default

    cel mai simplu in incerci pe un pc cu newcs ... banuiesc ca are drivere de windows apoi vezi ce si cum....
    2XRCS DigiTV (2xrec+2xsmasrtcard(extra1)+antena+LNB), DK-1102 Offset 1,2 DM800


  8. #8
    Member Mentor
    RDI - Board Default Avatar

    Join Date
    Nov 2004
    Posts
    531
    Posts Thanks / Likes

    Default

    Pe dreamul 800/E2 este mai simplu, adica si cartela este citita mai bine/rapid.
    Pe 7020Si am instalat si eu driverele manual. Aici pot spune ca smargoul este mai greu citit. Adica, dupa vreo 20/30 min apare cartela. Asta la fiecare restart al dreamului. Asteapta pina la o ora daca e nevoie, si schimba mai des pe canalele care doresti sa fie citite de reader.
    Restul, ce este nevoie in config, s-a scris mai sus.
    Bafta

  9. #9
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,462
    Posts Thanks / Likes

    Default

    pai man cum vrei sa iti merga daca tu ai coment la reader in cfg.


    #### Config ####
    ###############################################
    # SERVER LISTEN PORT : #
    #SERVER LISTEN PORT : 12000
    # INFO LISTEN PORT : #
    #INFO LISTEN PORT : 16000
    # HTML INFO LISTEN PORT : #
    #HTML INFO LISTEN PORT : 16001
    # ZAP OSD TIME : #
    #ZAP OSD TIME :0
    # OSD USERNAME : #
    #OSD USERNAME :******
    # OSD PASSWORD : #
    #OSD PASSWORD :******
    # PHOENIX READER PATH : #
    # EMM Blocker #
    # SHOW TIMING : #
    #SHOW TIMING : no
    # DEBUG : #
    #DEBUG : no
    # NEWCAMD CONF : #
    #NEWCAMD CONF :no
    # DISABLE EMM : #
    #DISABLE EMM : yes
    # EXTRA EMM LEVEL : #
    #EXTRA EMM LEVEL : no
    # BOX KEY #
    # BEEF ID : #
    # PINCODE : #
    # SOFTKEY FILE : #
    #SOFTKEY FILE : /var/keys/SoftCam.Key
    # AUTOROLL FILE : #
    #AUTOROLL FILE : /var/keys/AutoRoll.Key
    # STATIC CW FILE : #
    #STATIC CW FILE : /var/keys/constant.cw
    # CAID IGNORE FILE : #
    #CAID IGNORE FILE : /var/keys/CCcam.ignore
    # LOG WARNINGS : #
    # LOG WARNINGS : /tmp/warnings.txt
    # #
    #################################################
    #SERVER LISTEN PORT : 12000
    #ALLOW WEBINFO: yes
    #SHOW EXTENEDED CLIENT INFO : yes
    #WEBINFO USERNAME : ******
    #WEBINFO PASSWORD : ******
    #WEBINFO LISTEN PORT : 16001
    #ZAP OSD TIME : 3
    #EXTRA EMM LEVEL : yes
    #EMM THREADS : 2
    #OSD USERNAME : ******
    #OSD PASSWORD : ******
    SERIAL READER : /dev/tts/0 smartreader+
    #TRY ALL CHIDS : /dev/tts/0
    SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6860002
    ################################################## ####
    #CAMKEY : /dev/sci2 00 00 00 00 00 00 00 00
    ################################################## ####
    #SERIAL READER : /dev/ttyUSB0 smartreader+
    #SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
    #CAMKEY: /dev/ttyUSB0 00 00 00 00 00 00 00 00
    #CAMDATA: /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    #TRY ALL CHIDS : /dev/ttyUSB0
    ################################################## ##
    SERIAL READER : /dev/ttyUSB0 smartreader+
    SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3570000


    incerca asa
    350 kg de scule!

  10. #10
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Thumbs up s-a rezolvat...partial

    ptru cei care folosesc un smargo nou trebuie urmate urm.etape

    -Pe PC sai instaleze pachetul de treibere actualizate Smartreader Update auf v.1.3
    -smarterul config.dupa cum urmeaza
    Mode = Autoswitch
    Kernel = Dreambox
    T-Mode = 0
    EGT = 0
    -in ultima img.enigma 2 .Bluepanel > Extras/Einstellungen > Kernel Module
    > USB Cardreader (Chipset FTDI) trebuie activat la da
    -in cccam conf.se editeaza :
    SERIAL READER : /dev/usb/tts/0 smartreader+

    Dupa un restart va functiona
    la mine toate cardurile sant imediat recunoscute in afara cardului PINK

  11. #11
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Angry ...pe nabilo

    Dupa ce s-a rezolvat instalarea pe Gemeni 410 acum am probleme la recunoasterea cititorului Smargo pe NabiloBlackHole_DM7025_09 ,am instalat
    cele trei pachete kernel-module-...dm7025.ipk am verificat cu DCC ca sant instalate !..dar nu recunoaste nici un card ..in conf cccam am trecut pe rand
    SERIAL READER : /dev/ttyUSB0 smartreader+
    SERIAL READER : /dev/usb/tts/0 smartreader+
    SERIAL READER : /dev/tts/0
    peste tot rezultatul a fost acelasi ..cartela necunoscuta!
    mai trebuie modulele activate ..?
    Va multumesc ptru. ajutor!

  12. #12
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Ce carduri ai incercat? Daca nu poti sa scrii aici, da-mi PM.

  13. #13
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Default smargo

    Quote Originally Posted by SatWien View Post
    Ce carduri ai incercat? Daca nu poti sa scrii aici, da-mi PM.
    card PINK (16°),orf,inxtv!


  14. #14
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,119
    Posts Thanks / Likes

    Post

    Pai nu ne spui rezultatul ?.....
    asa doar ca idee.
    ,,*** Time is an illusion ! ***,,


  15. #15
    Junior Member Teacher
    Join Date
    Dec 2007
    Location
    Wels
    Posts
    195
    Posts Thanks / Likes

    Thumbs up smargo

    Quote Originally Posted by Sommersby View Post
    Pai nu ne spui rezultatul ?.....
    asa doar ca idee.
    Scuze....ptr. intarziere,.functioneaza dupa cum urmeaza :

    Kernel Module din dream
    > USB Cardreader (Chipset FTDI) pus pe DA

    in cccam am trecut
    SERIAL READER : /dev/usb/tts/0 smartreader+

    iar smargo trebuie programat asa

    Mode = Autoswitch
    Kernel = Dreambox
    T-Mode = 0
    EGT = 0
    seca, conax, cryptoworks, nds, viaccess -> T=0
    ...... (betacrypt, Nagra? Haven't tested) -> T=1

    La mine merge cu ORF card

    bafta !

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top