sir,
i hav kaon ksc 100 mco model of dishtv in india.
i hav taken up log file at the time of booting of stb.
i wanna to make my stb alive.
plz. anybody send or post here jtag for the aforesaid model and flash file .

STAVMEM_Init()=OK
STAVMEM_CreatePartition()=OK
STEVT_Init()=OK
STPWM_Init()=OK
STCLKRV_Init(CLKRV0)=OK
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
DECN_Init()=OK
VTG_Init()=OK
STVID_Init(VID0)=driver changed at 3 April 2003=Ok
OSD_Initialize=(OK)

==============================================
Version 2.1.6 v1
Date Apr 01 2005, Time 23:04:21
NO MICOM : [EuroLoader - Sat384] 1/2M !
==============================================

[FE] Version : 02.03.00 Last Update : 2004.06.16
================> HW_Ver = 0x12C501 : 0x0D, 0x2A, 0x4A <=================
DVB TYPE = 0x1 !!!!
BOARD TYPE = 3 !!!!
CI STATUS = 1 !!!!
VIDEO INVERTED !!!!
gIS_LEDFront = 2
___C_1 Detected !!! gIS_LEDFront= 2, gHEAD.mcVideoInvert = 1
HWC_VideoInvert(1)
[0], CH_ADDR[0xc0182cc4], CH_IDX[15], TUN_ADDR[0xc0082c90], TUN_IDX[0]
BOOTLOADER :: TS SERIAL = 0
[REREADCLOCK] 0-0-0, 0: 0. 0
FLASH ID: 0x234a, COM ID: 0x00bf
sdVerifyMasterOrSlaveThroughPC() = 1
NO_ACKNOWLEDGE with PC.
nvram_read_ds_info() scan info err
___ V300 BOARD DETECTED !!!!
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
[0x00] SHARP 0614 Is detected !!!
Hdl->mcChanType = [0x0c]
Hdl->mcTuneType = [0x89]
FE_GetTunerName(0) = ZL10
FE_GetTunerName(1) = ZL10
HW OUI:0008b9 mdl=0x2804 ver=0x0100 msk=0x0000
SW OUI:0008b9 mdl=0x2804 ver=0x0287 msk=0x0fff
*jumpCode = 0x25783020
gFLASH_BASE = 0x7fe00000
Jump : 0x7feffffe
STI2C_Init(back)=Ok
STI2C_Init(front)=Ok
STFLASH_Init(Success!!)
STFLASH_Open(Bank0)=Ok
STFLASH_GetParams(0)=Ok
FLASH_GetParams()=

ManufactCode=0xbf, DeviceCode=0x234a
ManufactCode=0xbf, DeviceCode=0x234a

STFLASH_Term(Bank0)=Ok
Flash setup Ok (35 blocks)
STFLASH_Init(Success!!)
STFLASH_Open(Bank0)=Ok

################# LAS TEST ####################
Date Apr 29 2008, Time 20:26:37
CPU Clock Speed = 81000000
################################################

SetPort4 = 0::SetPort4 = 1:: THIS IS LOCOST NORMAL FRONT !!!
Wait..............................
CAS Verifier Search...............


================================================== =====================
CAS Verifier OTV Area Search.......Start(0x101000)........
================================================== =====================
OTV_BLOCK_ERASE :: Block_Addr = 0x110000, Block_size = 0x10000, Block_count = 1
CAS Verifier BOTH BLOCK Search.........Fail......
================================================== =====================


================================================== =====================
CAS Verifier Search.......Start(0x101000)........
================================================== =====================
ORIGNAL KEY STORE VERSION MISMATCH : addr=101000, ver=c7da03b2, size=2788
>> file saved to TermLog_0811105 25 22 PM.txt