Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 9 of 9
  1. #1
    Junior Member Teacher
    Join Date
    Apr 2006
    Location
    Timis
    Posts
    362
    Posts Thanks / Likes

    Default ajutor configurare f line

    Salutare.
    Cine stie cum se poate configura urm. ex.
    Card local Focus, in local sa ramina ex. Hustler si mai departe sa nu fie vizibil in share.
    Am gasit urmatorul ex.

    Advanced F line

    F: username password 2 1 1 { 0:0:3 } { 0100:000080:15df }

    * Your friend will get all the shares from you that are up to 2 hops away from you
    * He will be allowed to use your emu keys
    * He is allowed to send emm's
    * He will get any share available on your server and he is allowed to re-share them, his friend is also allowed to share them once again
    *He is also not allowed to view or share channel 0100:000080:15df


    Am incercat urmatoarele ex.
    Hustler are 0B00:000000:000F
    F: XXXXX XXXX 2:0:0 { 0:0:2} { 0B00:000000:000F }
    F: XXXXX XXXX 2:0:0 { 0:0:2} { 0B00:000000:0000F }
    F: XXXXX XXXX 2:0:0 { 0:0:2, 0B00:000000:000F }

    Si nu merge, deschide canalul la peer.
    Cardul este in 7020 si testul facut pe 800.
    Deschide fara probleme, daca filtrez cardul in linia c nu se mai vede in 800, canalul individual trece de filtru fara probleme.
    Daca stie cineva si a facut asa ceva rog un sfat.
    Multumesc.
    DM 8000, card Focus OSCAM,120 dish, H-H Strong,

  2. #2
    Gold Member Expert
    Join Date
    Feb 2005
    Posts
    4,738
    Posts Thanks / Likes

    Talking

    Quote Originally Posted by iosi View Post
    Salutare.
    Cine stie cum se poate configura urm. ex.
    Card local Focus, in local sa ramina ex. Hustler si mai departe sa nu fie vizibil in share.
    Am gasit urmatorul ex.

    Advanced F line

    F: username password 2 1 1 { 0:0:3 } { 0100:000080:15df }

    * Your friend will get all the shares from you that are up to 2 hops away from you
    * He will be allowed to use your emu keys
    * He is allowed to send emm's
    * He will get any share available on your server and he is allowed to re-share them, his friend is also allowed to share them once again
    *He is also not allowed to view or share channel 0100:000080:15df


    Am incercat urmatoarele ex.
    Hustler are 0B00:000000:000F
    F: XXXXX XXXX 2:0:0 { 0:0:2} { 0B00:000000:000F }
    F: XXXXX XXXX 2:0:0 { 0:0:2} { 0B00:000000:0000F }
    F: XXXXX XXXX 2:0:0 { 0:0:2, 0B00:000000:000F }

    Si nu merge, deschide canalul la peer.
    Cardul este in 7020 si testul facut pe 800.
    Deschide fara probleme, daca filtrez cardul in linia c nu se mai vede in 800, canalul individual trece de filtru fara probleme.
    Daca stie cineva si a facut asa ceva rog un sfat.
    Multumesc.
    Teoretic ai procedat bine, dar:
    C_O_N_A_X-ul are sub forma aceasta 0B00:000000 ff multi provideri, si nu tine figura

    Eu iti recomand sa bagi refuz de a vedea 0B00:000000:0000F in linia C-line primita de la fiecare peer, mai putin DM800

    Code:
    de ex,
    C: XXXXXXXXX.dyndns.org port USER passwd no { 0:0:2, 0B00:000000:000F }
    rezulta o avalansa de reshare-uri interzise

    P.S. Nu stiu cite canale codate C_O_N_A_X mai exista cu SID=15(DEC)=000F(HEX), dar da-mi de stire daca a functionat
    La mine nu am nici un fel de restictii de genul ce ai incercat tu pe F-line, si totul decurge OK

    eventual baga versiunea:
    Code:
    de ex,
    C: XXXXXXXXX.dyndns.org port USER passwd no { 0:0:2, 0B00:000000:000F:1 }

  3. #3
    Junior Member Teacher
    Join Date
    Jul 2008
    Posts
    111
    Posts Thanks / Likes

    Default

    Oricum, corect e: F: XXXXX XXXX 2 0 0 { 0:0:2}
    , nu F: XXXXX XXXX 2:0:0 { 0:0:2}
    Sunaray SR4, Dreambox DM 800 HD PVR, Dreambox 500 s, antena 1,2 m, montura H-H

  4. #4
    Gold Member Expert
    Join Date
    Feb 2005
    Posts
    4,738
    Posts Thanks / Likes

    Talking

    Code:
    F: <username> <password> <uphops> <shareemus> <allowemm> { caid:id:downhops,
    caid:id:downhops, ... } { caid:id:sid, caid:id:sid, ... }
    To understand how to limit access to each card, let’s look at the following example
    F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
    <uphops> is set to 0, the client can only access the server local cards
    <shareemus> is set to 1, the client can have access to the server local key file
    <allowemm> is set to 0, the client cannot do any remote EMM
    <caid:id> is set to 0100:000080, the client does not have access to Canal+
    France card
    <caid:id:downhops> is set to 0622:000000:1, the client receives Canal+ NL, but cannot
    reshare it
    <caid:id:downhops> is set to 0500:000000:2, the client receives a Viacces provider, and
    can reshare it 1 hop further
    Therefore, in addition to limiting server access, <caid:id:downhops> allows the server to
    define how far the client can reshare the server cards. This is set in the downhops field.
    Let’s look at the following example:
    F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
    <uphops> is set to 5, the client receives all the cards up to a distance of 5 hops
    from the server
    <shareemus> is set to 0, the client does not have access to the server local key file
    <allowemm> is set to 1, the client receives remote EMM
    <caid:id:downhops> is set to 0:0:3, the client receives all the cards, and can reshare them 2
    hops further
    <caid:id:downhops> 000080:1, with the exception of this card, that cannot be reshared
    The option <caid:id:sid> allows the server to limit access even to a specific TV service.

  5. #5
    Junior Member Teacher
    Join Date
    Apr 2006
    Location
    Timis
    Posts
    362
    Posts Thanks / Likes

    Default

    Quote Originally Posted by picollo08 View Post
    0B00:000000-e prea generic..
    Ia vezi tu la un un info acolo in imagine in loc de adunatura asta de "0" ai ceva in Hexa....
    Pune 0B00:ceva_in_hexa_:000F
    Si va merge...
    mai precis Streaminfo....
    Problema aici se opreste cu ce a postat @ziper.
    The option <caid:id:sid> allows the server to limit access even to a specific TV
    Am identificat ca si la alti provideri conax se gaseste 000f la nordici si la Max am gasit la cardul Connax.
    Problema este ca am identificat o linie in info canal la dream si spune ceva despre TSID 0X0001 si difera la fiecare canal, si SID difera la fiecare canal, acum ma intreb daca un peer care vrea sa vada canalul la el in dream corespunde acest TSID ( Transport Stream ID ) sau e diferit pentru ca SID e acelasi 000f.
    Poate se uita cineva sa vada acest TSID este la fel 0x001 la Hustler pentru ca pe el fac teste.
    Am sa incerc si varianta cu TSID.
    O sa pun si rezultatul, poate foloseste si altora.Dar poate verifica cineva daca e la fel TSID.
    Am mai vazut ca unii folosesc 2 0 0 alti 2:0:0, punctele, cu si fara, ca rezultate e bine sa fie sau sa nu fie puse.
    Numai bine.
    DM 8000, card Focus OSCAM,120 dish, H-H Strong,

  6. #6
    Junior Member Teacher
    Join Date
    Apr 2006
    Location
    Timis
    Posts
    362
    Posts Thanks / Likes

    Default

    Quote Originally Posted by danzet View Post
    Oricum, corect e: F: XXXXX XXXX 2 0 0 { 0:0:2}
    , nu F: XXXXX XXXX 2:0:0 { 0:0:2}
    Asa seteaza si alti deci cred ca corect e fara puncte.
    DM 8000, card Focus OSCAM,120 dish, H-H Strong,

  7. #7
    Gold Member Expert
    Join Date
    Feb 2005
    Posts
    4,738
    Posts Thanks / Likes

    Default

    Da nu se pune caracterul :
    Eu ma refeream la exemplul de mai jos ca ar fi corect

    Quote Originally Posted by iosi View Post
    Advanced F line

    F: username password 2 1 1 { 0:0:3 } { 0100:000080:15df }

    Acesta este exemplul de linie F-line(completa:
    Code:
    F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df } { 12:00-17:00, 19:00-20:00 } 81.23.45.67
    ...care nu contine :

    Ce are TSID=TID cu Linia F-line
    Oricum daca crezi ca te ajuta, am facut un screenshoot la ce doreai:

  8. #8
    Gold Member Expert
    Join Date
    Feb 2005
    Posts
    4,738
    Posts Thanks / Likes

    Default

    Quote Originally Posted by iosi View Post
    ...
    Am identificat ca si la alti provideri conax se gaseste 000f la nordici si la Max am gasit la cardul Connax.
    Pune-i aici sa-i vad si io.
    Io nu iam gasit
    La 0.8*W, unde ai tu cardul local mai este un feed inactiv cu SID=15(DEC)=000F(HEX) si in plus e Power-Wu
    Tu trebuie sa te legi doar de canalele cu SID=15(DEC)=000F(HEX) codate C_O_N_A_X
    Code:
    0B00:000000:000F "Focus Sat - Hustler TV [C]"
    La 4.8*E mai este:
    Code:
    0B00:000000:000F "Akta - Realitatea TV [C]"
    ... si atit. Nici un posibil alt conflict.

    Legat de TSID=TID:
    -daca te uiti la canalele de pe o anumita frecventa=TP, vei vedea ca au alocat acelasi TSID=TID[ vezi TVR1, TVR2...Hustler TV au TID=1(DEC)=0001(HEX)];
    -aceste valori nu sunt alocate inca odata pe un acelasi satelit(decit in faze de inlocuire a tp-ului cu unul de pe un satelit nou, pe aceeasi pozitie). La tine nu e cazul;

    Ar trebui ca la toti peers sa pui
    F: user1 pass1 2 0 0 { 0:0:2 } { 0B00:0000:000F }
    , mai putin la F-line pt DM800

    in plus, daca ai peers care iti dau local de AKTA, pune-le in linia C-line primita:

    C: someserver.somedomain port user1 pass1 { 0B00:0000:000F }

  9. #9
    Junior Member Teacher
    Join Date
    Apr 2006
    Location
    Timis
    Posts
    362
    Posts Thanks / Likes

    Default

    Mersi pentru informare, si pentru ajutorul cu verificarea TSID.
    Am intrebat pe diferite forumuri si toti spun acelasi rezultat cum ai aratat.
    Ramine sa testez direct cu un peer si sa pun ex. in linia F.
    Alte rezultate o sa postez, ce am reusit.
    Marsi la toti pentru amabilitate.

    Quote Originally Posted by first_zipper View Post
    Pune-i aici sa-i vad si io.
    Io nu iam gasit
    La 0.8*W, unde ai tu cardul local mai este un feed inactiv cu SID=15(DEC)=000F(HEX) si in plus e Power-Wu
    Tu trebuie sa te legi doar de canalele cu SID=15(DEC)=000F(HEX) codate C_O_N_A_X
    Code:
    0B00:000000:000F "Focus Sat - Hustler TV [C]"
    La 4.8*E mai este:
    Code:
    0B00:000000:000F "Akta - Realitatea TV [C]"
    ... si atit. Nici un posibil alt conflict.

    Legat de TSID=TID:
    -daca te uiti la canalele de pe o anumita frecventa=TP, vei vedea ca au alocat acelasi TSID=TID[ vezi TVR1, TVR2...Hustler TV au TID=1(DEC)=0001(HEX)];
    -aceste valori nu sunt alocate inca odata pe un acelasi satelit(decit in faze de inlocuire a tp-ului cu unul de pe un satelit nou, pe aceeasi pozitie). La tine nu e cazul;

    Ar trebui ca la toti peers sa pui
    F: user1 pass1 2 0 0 { 0:0:2 } { 0B00:0000:000F }
    , mai putin la F-line pt DM800

    in plus, daca ai peers care iti dau local de AKTA, pune-le in linia C-line primita:

    C: someserver.somedomain port user1 pass1 { 0B00:0000:000F }
    DM 8000, card Focus OSCAM,120 dish, H-H Strong,

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top