Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 13 of 13
  1. #1
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Wink Linksat with newcamd 6 port



  2. #2
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Default

    Latest s/w 1.30.8 support Newcamd ( solving aljazeera problem )

    http://www.mediafire.com/?f1etuyygntg

  3. #3
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Default

    k89 + NEW with PREMIER + DIGI + POLSAT + ART + RAI + Mbc Int 20/21-08-2008

    http://www.mediafire.com/?u5jkz7ttej5

    To upload the key,You need to do the following - this method does not require rs232 cable. all what you need is a PC with router connected to the receiver: 1. Download latest key file(.bin) 2. go to Menu>Internet>Network Information and check your current IP address (eg: 192.168.xx.xxx) 3. type in Internet Explorer of your PC your receiver's ip address: (e.g.: 192.168.xxx.xxx) 4. type user name: admin and Password: 0000 5. then browse and select the downloaded bin file and press upload. 6. It will take 30 seconds then your receiver will reboot and voila! art channels will be working for 1 or 2 days. 7. You have to repeat this method each time the codes are changed. 8. in this way you can reduce time of inputting the codes by remote control and make it with one click.9. for this method to work make sure that> Network Connection is OFF, Auto Update Check is OFF and NEWCAMD is OFF.

  4. #4
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Aug 2008
    Posts
    4
    Posts Thanks / Likes

    Default

    Quote Originally Posted by jft View Post
    k89 + NEW with PREMIER + DIGI + POLSAT + ART + RAI + Mbc Int 20/21-08-2008

    http://www.mediafire.com/?u5jkz7ttej5

    To upload the key,You need to do the following - this method does not require rs232 cable. all what you need is a PC with router connected to the receiver: 1. Download latest key file(.bin) 2. go to Menu>Internet>Network Information and check your current IP address (eg: 192.168.xx.xxx) 3. type in Internet Explorer of your PC your receiver's ip address: (e.g.: 192.168.xxx.xxx) 4. type user name: admin and Password: 0000 5. then browse and select the downloaded bin file and press upload. 6. It will take 30 seconds then your receiver will reboot and voila! art channels will be working for 1 or 2 days. 7. You have to repeat this method each time the codes are changed. 8. in this way you can reduce time of inputting the codes by remote control and make it with one click.9. for this method to work make sure that> Network Connection is OFF, Auto Update Check is OFF and NEWCAMD is OFF.
    DEAR BROTHER
    I DID SAME STEPS ... BUT MY RCIVER LS-900 COMPLETLY STOPS ( NO LIGHT .... NOTHING )
    PLEASE DO YOU HAVE ANY INFORMATION ?
    THANKS

  5. #5
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Default

    first you load the boot file>>boot_g3x_1.34.bin
    second load latest main file>>1.30.8

  6. #6
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Aug 2008
    Posts
    4
    Posts Thanks / Likes

    Default

    Quote Originally Posted by jft View Post
    first you load the boot file>>boot_g3x_1.34.bin
    second load latest main file>>1.30.8
    1st many thanks for your coop .
    2nd where can i find these files
    3rd how can i do it ..... my reciver completly shutdown

  7. #7
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Default

    wait... i give you the link and instruction on how to do that.

  8. #8
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Default

    A)

    UpLoaderV13.rar
    http://www.mediafire.com/?2gzj2xgmlzt

    1. Open UploaderV13.exe
    2. Select COM Port
    3. Select BOOT instead of MAIN (important!)
    4. Click OPEN FILE
    5. Select boot_g3x_1.34
    6. Click START DOWN and confirm following with ok
    7. Power "On" your receiver
    8. Wait until receiver re-boot by himself

    boot_g3x_1.34.rar
    http://www.mediafire.com/?jya1mfghgiy

    B)

    take my m.file above>>>
    071123_v1.30.8_linksat_t8.rar
    1. Power OFF your receiver
    2. Connect RS232 cable between PC and receiver
    3. Open UploaderV13.exe
    4. Select COM PORT and select MAIN file 071123_v1.30.8_linksat_t8
    5. Click START DOWN and confirm following by click OK
    6. "ON" your receiver
    7. Wait till upload is completely finished
    8. Make Factory Reset
    and your done!

  9. #9
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jul 2008
    Posts
    1
    Posts Thanks / Likes

    Default

    Quote Originally Posted by jft View Post
    A)

    UpLoaderV13.rar
    http://www.mediafire.com/?2gzj2xgmlzt

    1. Open UploaderV13.exe
    2. Select COM Port
    3. Select BOOT instead of MAIN (important!)
    4. Click OPEN FILE
    5. Select boot_g3x_1.34
    6. Click START DOWN and confirm following with ok
    7. Power "On" your receiver
    8. Wait until receiver re-boot by himself

    boot_g3x_1.34.rar
    http://www.mediafire.com/?jya1mfghgiy

    B)

    take my m.file above>>>
    071123_v1.30.8_linksat_t8.rar
    1. Power OFF your receiver
    2. Connect RS232 cable between PC and receiver
    3. Open UploaderV13.exe
    4. Select COM PORT and select MAIN file 071123_v1.30.8_linksat_t8
    5. Click START DOWN and confirm following by click OK
    6. "ON" your receiver
    7. Wait till upload is completely finished
    8. Make Factory Reset
    and your done!
    hey jft, thx for the links. haven't tried them yet though
    i have ls-900 BT:1.34 SW:V1.33 k89 and connect to the stb via the webloader. now before i upload "071123_v1.30.8_linksat_t8.rar" do i need to upload "boot_g3x_1.34.rar" or it's the same as the one i have? also, can i upload all these via the webloader or should i specifically connect via RS232?
    thx again!
    Last edited by Blad3; 22nd August 2008 at 18:31.

  10. #10
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Aug 2008
    Posts
    4
    Posts Thanks / Likes

    Default

    Quote Originally Posted by jft View Post
    A)

    UpLoaderV13.rar
    http://www.mediafire.com/?2gzj2xgmlzt

    1. Open UploaderV13.exe
    2. Select COM Port
    3. Select BOOT instead of MAIN (important!)
    4. Click OPEN FILE
    5. Select boot_g3x_1.34
    6. Click START DOWN and confirm following with ok
    7. Power "On" your receiver
    8. Wait until receiver re-boot by himself

    boot_g3x_1.34.rar
    http://www.mediafire.com/?jya1mfghgiy

    B)

    take my m.file above>>>
    071123_v1.30.8_linksat_t8.rar
    1. Power OFF your receiver
    2. Connect RS232 cable between PC and receiver
    3. Open UploaderV13.exe
    4. Select COM PORT and select MAIN file 071123_v1.30.8_linksat_t8
    5. Click START DOWN and confirm following by click OK
    6. "ON" your receiver
    7. Wait till upload is completely finished
    8. Make Factory Reset
    and your done!

    MANY THANKS TO I TRIED BUT IT FAIL

  11. #11
    Junior Member Teacher
    Join Date
    Feb 2005
    Location
    middle-earth
    Posts
    277
    Posts Thanks / Likes

    Default

    Quote Originally Posted by Blad3 View Post
    hey jft, thx for the links. haven't tried them yet though
    i have ls-900 BT:1.34 SW:V1.33 k89 and connect to the stb via the webloader. now before i upload "071123_v1.30.8_linksat_t8.rar" do i need to upload "boot_g3x_1.34.rar" or it's the same as the one i have? also, can i upload all these via the webloader or should i specifically connect via RS232?
    thx again!
    No need to load the boot file "BT:1.34" you already have!

  12. #12
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Aug 2008
    Posts
    2
    Posts Thanks / Likes

    Default Linksat Ls900

    Hi JFT,

    After uploading the files as per your instructions. I will be able to see the channels on my linksat ls900 or not.

  13. #13
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Aug 2008
    Posts
    3
    Posts Thanks / Likes

    Default


    Hey JFT,

    After I uploaded your 071122_v1.30.7_linksat_t7 file to my LS 900 via http, my reciever is screwed... I can NO longer access it through http loader and it seems the internet options are now down ...after i set a static ip it is erased after reboot and internet is always off and the ls 900 can never get a DHCP IP... I also now get a boot image of some sort of name with every boot.... I hope you have a solution for this

    I have also tried to use an RS232 cable with a loader to send the original WS software but the loader just stops responding as soon as it starts the uplaod of the file.

    Please let me know....

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top