Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 10 EUR (10%)
Donate to support this site...

Results 1 to 2 of 2
  1. #1
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jul 2008
    Posts Thanks / Likes

    Default STI 5516SWC JTAG help

    I have an ADB 3000 ( telestraclear) That I need to JTAG to try and get the IRD/BK . There is a 20 pin connector. The jTAG pins are 2,4,6,16 and 18 + ground. I have taken off the BGA and found that the pins connect to :-
    AF6 ( I think)
    AE6 ( I think).
    TRST is on PIN 4 on the JTAG connector.
    Can anyone help in naming the CPU pins, i.e. is R23 TDO? etc.
    Do I need to ground one of the processor pins to enable JTAG to connect so I can read memory.?
    I'm not convinced that the CPU pins are correct, because usually the JTAG pins are all together/side by side, ....But I buzzed out the connections from the JTAG connector pins to all the pins on the BGA...and that's what I got.
    Last edited by chartman; 19th July 2008 at 10:06.

  2. #2
    Member Mentor
    Join Date
    Aug 2007
    Posts Thanks / Likes


    Join Mr.yan naing.He is one of the expert in this field.
    Stop Using Plastic Bags!
    Using 5R to Protect Our Green Planet
    Reduce,Reuse,Recycle,Reject & Return



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Back to Top