Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 15 of 15
  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default Setare Mgcamd pt ufs 910

    As dori un ajutor pt. un incepator pt setarea Mgcamd pt sh* la UFS 910 cuplat la net. Cu multumiri.
    DreamBox DM 7000S/4, SS2, Kathy UFS 910, 1.2m Al, H-H, INVACOM 0.3 dB.

  2. #2
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,460
    Posts Thanks / Likes

    Default

    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 02 }

    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 02 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 02 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    U: { 05 }

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 09 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 05 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 00 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 02 } root kathrein

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 11 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 03 } 192.168.0.202 8024 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 05 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 127 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 00 }
    350 kg de scule!

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Posts
    442
    Posts Thanks / Likes

    Default

    Eu am alta setare , Poate ne spune cineva care este buna :

    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }

    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 02 }

    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    U: { 01 }

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    G: { 08 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 05 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 gbox, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, gbox
    # 02 newcamd, camd3, gbox, radegast
    P: { 00 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 04 } 172.16.1.1 28007 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 00 }
    Last edited by bobbob; 20th June 2008 at 02:38.

  4. #4
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Sep 2005
    Location
    Tr. Severin
    Posts
    3,273
    Posts Thanks / Likes

    Default

    setarea corecta pt share este cea din peer.cfg

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Posts
    442
    Posts Thanks / Likes

    Default

    Quote Originally Posted by smv167 View Post
    setarea corecta pt share este cea din peer.cfg

    Cea din peer_cfg este pt. linii ...oricum trebuiesc ambele...iat-o si pe asta :

    # sample peer.cfg for gbox client in mgcamd
    # syntax the same as in cwshare.cfg,
    # you can just copy cwshare.cfg to this file.
    # see below for supported tags, others not supported (yet).
    # max cards to send ecm too + preffered cards ids (up to 32)
    X: { 05 } 1234 ABCD

    # max card's distance to use for ecm
    I: ( 05 }

    # resend after 2 seconds, re-sync (send to all) after 3 seconds
    N: { 0 0 0 0 2000 3000 }

    # same, but for NDS cards
    S: { 0 0 0 0 400 500 }

    # my host and password
    M: { my.dyndns.com { 1234ABCD }}

    # peers, unlimited number, but only up to 32 unique ports to listen
    # host, port to listen, remote port, password, levels (ignored)
    D: { peer1.dyndns.com { 2471 3471 { ABCD1234 { 9 9 }}}}
    D: { peer2.dyndns.com { 2471 3471 { 6789ABCD { 9 9 }}}}

    # ignore ids
    Y: { 01 02 }
    Y: { 02 03 }

    # always save ids
    G: { 03 04 }
    G: { 04 05 }

    # virtual cards
    V: { 01 { 05 00 7C 00 }}
    V: { 02 { 18 01 04 01 }}
    V: { 02 { 18 01 05 01 }}
    V: { 03 { 18 01 40 01 }}
    V: { 03 { 18 01 41 01 }}

  6. #6
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Talking nelamuriri pt reg. client

    Am niste mici nelamuriri. Precizez ca doresc sa fiu client si nu server.
    1. In aceasta situatie se configureaza mgcamd.cfg in forma de mai sus?
    2. Nu am gasit nicaieri fisierul peer.cfg. Unde il gasesc?
    3. Configurarea din postul nr.3 este diferita de primele 2. Unde se completeaza?
    2. In Mgcamd.cfg linia cu Ip-ul se completeaza cu IP-ul clientului (adica al receiverului client)?
    3. In afara de copierea fisierului mgcamd.sh4 (fara extensia sh4) in data\emu si eventual setarea mgcamd cfg, ce mai trebuie facut d.p.v al clientului (in afara de a "scalda in bere" proprietarul serverului)?
    DreamBox DM 7000S/4, SS2, Kathy UFS 910, 1.2m Al, H-H, INVACOM 0.3 dB.

  7. #7
    Member Mentor
    RDI - Board Default Avatar

    Join Date
    Oct 2002
    Location
    Romania
    Posts
    848
    Posts Thanks / Likes

    Default

    Quote Originally Posted by tabaluga View Post
    Am niste mici nelamuriri. Precizez ca doresc sa fiu client si nu server.
    1. In aceasta situatie se configureaza mgcamd.cfg in forma de mai sus?
    2. Nu am gasit nicaieri fisierul peer.cfg. Unde il gasesc?
    3. Configurarea din postul nr.3 este diferita de primele 2. Unde se completeaza?
    2. In Mgcamd.cfg linia cu Ip-ul se completeaza cu IP-ul clientului (adica al receiverului client)?
    3. In afara de copierea fisierului mgcamd.sh4 (fara extensia sh4) in data\emu si eventual setarea mgcamd cfg, ce mai trebuie facut d.p.v al clientului (in afara de a "scalda in bere" proprietarul serverului)?
    Nu merge MGcamd ca si server DOAR client.
    1 : DA dar se numeste mg_cfg
    2 :Un fisier txt car-l redenumesti in peer.cfg si cu continutul postat mai inainte
    3 : acela e peer.cfg
    4: foloseste cel postat de gogi daca nu diferenta se vede in comentarii ( cele care incep cu # )

    Ia de pe http://www.rdi-dreambox.com/ la sectiunea emu's ultimul mgcamd si-ti faci o idee.

    Ar trebui spus ce imagine folosesti.Daca nu te descurci hai pe chat si o sa fi surprins placut.

    f11

  8. #8
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Posts
    442
    Posts Thanks / Likes

    Default

    Quote Originally Posted by f11 View Post
    Nu merge MGcamd ca si server DOAR client.
    1 : DA dar se numeste mg_cfg
    2 :Un fisier txt car-l redenumesti in peer.cfg si cu continutul postat mai inainte
    3 : acela e peer.cfg
    4: foloseste cel postat de gogi daca nu diferenta se vede in comentarii ( cele care incep cu # )

    Ia de pe http://www.rdi-dreambox.com/ la sectiunea emu's ultimul mgcamd si-ti faci o idee.

    Ar trebui spus ce imagine folosesti.Daca nu te descurci hai pe chat si o sa fi surprins placut.

    f11
    Explica te rog la cele din postul lui Gogi care nu au comentariu :

    U: { 05 } nu are comentariu
    G: { 09 } nu are comentariu
    S: { 11 } 80 nu are comentariu
    L: { 03 } 192.168.0.202 8024 /tmp/mgcamd.log ce reprezinta IP acela si de ce este diferit ?
    H: { 07 } nu are comentariu
    R: { 05 nu are comentariu

    Daca tu ai aceste valori si functioneaza mai bine decat cele din postul meu le schimb si eu.......

    Multam

    Oricum in Mgcamd 1.30d de mg_cfg are alte setari ex :

    L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

  9. #9
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default

    Quote Originally Posted by bobbob View Post
    Explica te rog la cele din postul lui Gogi care nu au comentariu :

    U: { 05 } nu are comentariu
    G: { 09 } nu are comentariu
    S: { 11 } 80 nu are comentariu
    L: { 03 } 192.168.0.202 8024 /tmp/mgcamd.log ce reprezinta IP acela si de ce este diferit ?
    H: { 07 } nu are comentariu
    R: { 05 nu are comentariu

    Daca tu ai aceste valori si functioneaza mai bine decat cele din postul meu le schimb si eu.......

    Multam

    Oricum in Mgcamd 1.30d de mg_cfg are alte setari ex :

    L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

    La IP ul asta ma refeream si eu. Ar trbui sa fie fie IP ul clientului, fie cel al Serverului. Sau ceva imi scapa.....

    Oricum bobbob are dreptate...trebuie cred amandoua fiierele pt. ca seteaza variabile diferite...

    Si o ultima intrebare, poate chiar de incepator: Unde apar celebrele Linii si unde se inscrie fisierul peer.cfg
    DreamBox DM 7000S/4, SS2, Kathy UFS 910, 1.2m Al, H-H, INVACOM 0.3 dB.

  10. #10
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default nu merge!!!!!!!!!!

    Am facut urmatorii pasi si n-am reusit inca sharing:

    Am reinstalat mgcamd1.30d:
    copiat mgcamd (fara ext sh4), mg_cfg (modificat in varianta gogi), priority.list, ignore.list, replace.list in DATA\EMU
    copiat peer.cfg (varianta bobbob) in DATA\KEYS

    In mg_cfg am pus IP ul ca si cel din varianta gogi. Ala nu trebuie schimbat cumva?
    Transmis IP ul, MASK etc. proprietarului server

    Va rog ajutor. Mai trebuie facut ceva?


    Multumesc
    DreamBox DM 7000S/4, SS2, Kathy UFS 910, 1.2m Al, H-H, INVACOM 0.3 dB.

  11. #11
    Plictisit Teacher
    RDI - Board Default Avatar

    Join Date
    Jun 2006
    Location
    BN
    Posts
    139
    Posts Thanks / Likes

    Default

    Si proprietarul serverului ti-a transmis liniile M si D sa le pui in peer.cfg ? Eventual uita-te in /tmp in fisierul mgstat.info si vezi ce scrie.
    Vezi ca sunt unii proprietari de servere care nu le place sa lucreze cu IP si trebuie sa-ti faci cont pe dyndns.com sau ceva echivalent ca sa asociezi IP -ul tau cu un nume.

    PS. IP-ul de la linia L din mg_cfg nu are nici o treaba. Trebuie sa-ti mearga sh*ringul indiferent de valoare ei.
    Digi - Humax , Kathy 910

  12. #12
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default

    Cred ca incet, incet apare luminita de la captul "sharing-ului". Mai am o nelamurire cu setarile de la dyndns. Pana acum am fct urm:
    1. Dyndns.com\ SERVICES \ FREE DYNAMIC DNS \ GET STARTED

    Aici doresc ajutor:

    HOSTNAME: orice nume? . Aici a aparut implicit "selfip.info" Las asa?
    SERVICE TYPE: HOST WITH IP ADDRESS (Bifat)
    IP ADDRESS: Aici introduc IP -ul Receiverului?

    Multumesc pt. ajutor
    DreamBox DM 7000S/4, SS2, Kathy UFS 910, 1.2m Al, H-H, INVACOM 0.3 dB.

  13. #13
    Member Mentor
    RDI - Board Default Avatar

    Join Date
    Oct 2002
    Location
    Romania
    Posts
    848
    Posts Thanks / Likes

    Default

    Quote Originally Posted by tabaluga View Post
    Cred ca incet, incet apare luminita de la captul "sharing-ului". Mai am o nelamurire cu setarile de la dyndns. Pana acum am fct urm:
    1. Dyndns.com\ SERVICES \ FREE DYNAMIC DNS \ GET STARTED

    Aici doresc ajutor:

    HOSTNAME: orice nume? . Aici a aparut implicit "selfip.info" Las asa?
    SERVICE TYPE: HOST WITH IP ADDRESS (Bifat)
    IP ADDRESS: Aici introduc IP -ul Receiverului?

    Multumesc pt. ajutor
    Daca ajungeai pe chat rezolvai mai repede problemele...

    f11

  14. #14
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default

    Quote Originally Posted by f11 View Post
    Daca ajungeai pe chat rezolvai mai repede problemele...

    f11
    Stii bancul cu ardelenii? Iti scriu numai sfarsitul....
    "Cand sa pun mana pe melc, Melcul TZZZUUUSHHTT^T>>>
    DreamBox DM 7000S/4, SS2, Kathy UFS 910, 1.2m Al, H-H, INVACOM 0.3 dB.

  15. #15
    Plictisit Teacher
    RDI - Board Default Avatar

    Join Date
    Jun 2006
    Location
    BN
    Posts
    139
    Posts Thanks / Likes

    Default

    Quote Originally Posted by tabaluga View Post
    IP ADDRESS: Aici introduc IP -ul Receiverului?

    Multumesc pt. ajutor
    Nu. Introduci IP-ul tau de la providerul de net. Presupun ca ai un router si nu ai IP public direct pe receiver. Dupa care vei deschide un port in router pe IP-ul receiverului port care se va regasi in linia D.
    Digi - Humax , Kathy 910

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top