Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 4 of 4
  1. #1
    88dBuV
    Guest
    RDI - Board Default Avatar

    Default DM500 LNB problems


    Installed a Ku dish and for searching max signal connected the LNB with a dm500 receiver and spectrum analyzer.
    No noise so LNB didn't get any voltage from receiver, searched a bit in the settings but nothing. Receiver was setup before on another location and all was working fine there.
    Second DM500 receiver, same story, used now the transponder menu and select some other frequencies and bingo LNB came to live. Finished the Ku dish alignment and connected the receiver to a C band dish for Thaicom. Again no noise, selected another C band transponder freq. nothing, selected a Ku freq and had noise, switched back to the c band transponder freq. Aligned the C band dish for max signal but got no lock on any transponder, time was flying with this kind of 'fun' and was fed up with it , picked up an old dvb receiver and got immediately a lock and picture.

    Shall try later with different images to check what now exactly happens with LNB voltages after startup but I can't receive a thing on the C band with two dreamboxes with that LNB.

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2004
    Location
    Jed, KSA
    Posts
    182
    Posts Thanks / Likes

    Default

    Dont waste your time on Dreambox 500 as I am still searching solution to all this problem.

  3. #3
    Moderator Expert
    Join Date
    Jan 2006
    Location
    Africa-Kenya-Nbi
    Posts
    3,108
    Posts Thanks / Likes

    Default

    Just do a proper set up to get the tunning correct on dreambox, at times it is a problem, but lots of patience and reading past set up problems will help you.
    make sure your lnb settings on dreambox are correct. if not go to individual settings and do it your ownway for the set ups.

  4. #4
    Junior Member Teacher
    Join Date
    Jun 2005
    Location
    Australia
    Posts
    415
    Posts Thanks / Likes

    Default


    And maybe try a reboot after changing settings before rescanning

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top