Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 15 of 15
  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Constanta
    Posts
    189
    Posts Thanks / Likes

    Default gbox instalare si configurare

    Poate cineva de aici sa ma ajute si pe mine cu instalarea si configurarea la gbox?Am dreambox 5620.Net este la dream .Va multumesc.

  2. #2
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    copiezi asta

    editezi fisierul cwshare,cfg cu datele tale, dai 755 la toate fisierele.

    si dai restart

    pass: costinitalia


  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Constanta
    Posts
    189
    Posts Thanks / Likes

    Default

    Quote Originally Posted by costinitalia View Post
    copiezi asta

    editezi fisierul cwshare,cfg cu datele tale, dai 755 la toate fisierele.

    si dai restart

    pass: costinitalia
    Deci sa inteleg ca la toate fisierele care le are gbox si le introduc in dream trebuie sa le dau atributul 755?

  4. #4
    Banned
    RDI - Board Banned Avatar

    Join Date
    Apr 2003
    Posts
    28
    Posts Thanks / Likes

    Default

    Doar fisierelor pe care le introduci in /var/bin si var/script .

  5. #5
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    cum a spus kb


  6. #6
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Constanta
    Posts
    189
    Posts Thanks / Likes

    Default

    Ok am facut cum ati spus merge belea .Alta viata.Multumesc boierilor.A cum ramane sa va intreb daca mai trebuie ceva setat la el in afara de cwshare?
    Last edited by georgexx; 12th April 2008 at 15:16.

  7. #7
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    O mica precizare...cele de mai sus sunt valabile pentru Gemini, scriptul de pornire si locatia lui difera in functie de img.




  8. #8
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    Quote Originally Posted by georgexx View Post
    Ok am facut cum ati spus merge belea .Alta viata.Multumesc boierilor.A cum ramane sa va intreb daca mai trebuie ceva setat la el in afara de cwshare?
    daca iti trebuie numai sa folosesti liniutele nu...

    sa nu uiti sa maresti distanta cardurilor....eu il am pe I:2 pentru ca am cacalau si merge bine si X:0A cate 10carduri pentru fiecare provider.

    ps: sa nu spui la lume ca ti-am cerut 50euro pentru ca ti-am configurat gboxul


    @didi asa este. Gboxul asta 2.1b este doar pentru gemini. fiecare imagine cu scriptul lui


  9. #9
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    Si ar mai fi ceva, in gbox.cfg la Z: si O: pune ip-ul dreamului iar la L: ip-ul pc-ului.Ceva in genul asta:
    Z: { 00 12 } ip dream 8024
    G: { 03 }
    C: { 01 }
    M: { 01 }
    A: { 01 }
    U: { 01 }
    H: { 01 }
    T: { 00 }
    O: { 03 } ip dream
    L: { 00 } ip pc 8017
    W: { 00 00 } 9600
    V: { F0 30 }




  10. #10
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Constanta
    Posts
    189
    Posts Thanks / Likes

    Default

    Ultima imagine de la Gemini o am pe dream.Deci o sa fie bine cu gbox-ul asta de la Costinitalia.Daca mai sant ceva setari la gbox-ul asta in afara de cele de ai sus eu astept sa mai spuneti,nu va sfiiti mai spuneti ca ma descurc sa le fac.Si multumesc tuturor care ma ajuta.Si locatia mea este Constanta.
    Last edited by georgexx; 12th April 2008 at 17:29.

  11. #11
    Silver Member Expert
    Join Date
    Sep 2005
    Location
    acasa
    Posts
    2,318
    Posts Thanks / Likes

    Default

    Quote Originally Posted by Didi View Post
    Si ar mai fi ceva, in gbox.cfg la Z: si O: pune ip-ul dreamului iar la L: ip-ul pc-ului.Ceva in genul asta:
    Z: { 00 12 } ip dream 8024
    G: { 03 }
    C: { 01 }
    M: { 01 }
    A: { 01 }
    U: { 01 }
    H: { 01 }
    T: { 00 }
    O: { 03 } ip dream
    L: { 00 } ip pc 8017
    W: { 00 00 } 9600
    V: { F0 30 }


    La mine nu merge gboxul cu configuratia de mai sus arata zero carduri dar merge ok asa

    Z: { 01 10 } 8024
    G: { 03 }
    C: { 00 }
    M: { 00 }
    A: { 01 }
    U: { 01 }
    H: { 01 }
    T: { 00 }
    O: { 00 } dreambox
    L: { 00 } 8017
    W: { 00 00 } 9600
    V: { f0 30 }

  12. #12
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,529
    Posts Thanks / Likes

    Default

    Daca tot vrei sa inveti gboxul itit dau urmatorul sfat (daca vrei sa il asculti bine daca nu e la fel de bine) : studiaza fiecare linie din gbox_cfg si abia apoi alegeti configuratia potrivita.
    Pentru asta iti pun aici un gbox_cfg detaliat (fiecare linie explicata in parte):

    # gbox config file created by @tonytr dvbsat.org team

    # Trace/Debug
    # xx yz ; xx=00 no konsole output
    # xx yz ; xx=01 konsole output
    # xx yz ; y=0 debug output (don't use)
    # xx yz ; y=1 no debug output
    # xx yz ; z=0 ouput to konsole
    # xx yz ; z=1 output to /var/tmp/debug.txt
    # xx yz ; z=2 Output to UDP (to capture with gboxt)

    # ---- DIT IP AANPASSEN - CHANGE THIS TO YOUR DB IP
    Z: { 01 12 } dream ip 8024

    # Task type
    # 00 ** normal mode gbox mode (no season, use Multicam instead)
    # 01 ** Season Emulation in a allcam chid 0602 nonZ
    # 10 ** Season Emulation in a allcam chid 1702 nonZ
    # 11 ** Season Emulation in a allcam chid 1702 Z
    # 12 ** Season Emulation in a allcam chid 1722 Z
    # 13 ** Season Emulation in a allcam chid 1762 Z
    # ** *1 Com port to use for season emulatiom (1 or 2)
    # ** 0* Use CTS fr RST detection
    # ** 1* Use DCD fr RST detection
    # ** ** 9600 = Baudrate to be used (working only on dbox2)
    W: { 00 00 } 9600

    # gbox working mode
    # 00 pure Emu
    # 01 pure SoftCam (when card inside), Emu (when no card inside)
    # 02 pure Net Client
    # 03 Mixed mode ! always use this !
    G: { 03 }

    # Display ECM messages on Konsole
    # 00 don't show any ECM's
    # 01 show only valid ECM's
    # 02 show valid and bad ECM's with complete data display
    C: { 01 }

    # Display EMM messages on Konsole
    # *0 don't show any EMM's
    # *1 show only valid EMM's
    # *2 show valid and bad EMM's with complete data display
    # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
    M: { 00 }

    # AutoUpdate
    # 00 is ignored (default)
    # 01 enable AU-always use this !
    # 02 Auto AU !
    A: { 01 }

    # Key update
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    U: { 02 }

    # Hash pids
    # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
    # 01 hash only pids with implemented algos and available keys ! always use this !
    H: { 01 }

    # Key files folder
    # 00 keyfiles in /var/keys
    # 01 keyfiles in /var/tmp
    T: { 00 }

    # On Screen Display for the Multysystemcam on com1/com2
    # 00 No OSD (default)
    # 01 display Smartcard messages in Neutrino
    # 02 display Smartcard messages in Neutrino new nhttpd format
    # 03 display Smartcard messages in Enigma
    # mypass (use user=root and pass=mypass for nhttpd)


    # DIT IP AANPASSEN - CHANGE THIS TO YOUR DB IP
    O: { 03 } dream ip user=root pass=dreambox

    # Logger and NET-mode UDP port Init
    # 00 do not init UDP port
    # 01 Init UDP port for IP, port, UDP
    L: { 00 } 10.0.0.3 2502

    # demux, multicam/comport configuration
    # *x ** ; x = device nummber to be used (0= default)
    # D* ** ; force use of /proc/bus/gtx for cw write operations
    (in the dbox2 the gbox writes directly the CW's, 00 is the
    recommended mode ! No drivers are required) use D* ** ONLY if
    you have Problems. 0* ** should be prefered !
    # F* ** ; write CW's in both devices (used for PVR in STB04xxx devices)
    # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
    # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
    # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
    # ** *z ; z=0001b (0x*1) use com1 as Multicam
    # ** *z ; z=0010b (0x*2) use com2 as Multicam
    # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
    # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
    # ** *z ; z=0100b (0x*4) invert CTS detection on com1
    # ** *z ; z=1000b (0x* invert CTS detection on com2
    # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
    V: { F0 10 }

    # RS232 SSSP mode
    # x debug messages, 1=on, 0=off
    # y com port to use (0=none, 1=com1, 2=com2)
    R: { 00 }

    #
    # extra options to override default seting in case you expirience Problems,
    # normaly these setings are not required.
    #
    # cpu, api, cw write method
    #
    # 00 auto
    # 01 80X86
    # 02 MPC823
    # 03 IBM STB04xxx
    # 00 auto
    # 01 ibm
    # 02 api2
    # 03 api3
    # 00 cw write style = use internal routine (only dbox2)
    # 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
    # 02 cw write style = CA_SET_DESCR type2
    # 03 cw write style = CA_SET_DESCR type3
    # 04 cw write style = 16 byte /proc/bus/gtx
    # 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
    # xx write cw in 1st device with index=xx
    # yy write cw in 2nd device with index=yy
    # 01 means with .index=0 (default)
    # 02 means with .index=1
    # 03 means with .index=0 and .index=1
    # .. any bitwise combination ...
    # FF means with all 8 indexes (0-7)
    #J: { 01 00 00 01 01 }

    # Files, folders, devices
    # folder/device comment
    #
    #F: { 01 } /var/tmp/pmt.tmp // pmt file
    #F: { 02 } /var/tmp/emm.info // key update log file
    #F: { 03 } /var/tmp/ecm.info // ecm info file
    #F: { 04 } /var/tmp/atack.txt // atack info file
    #F: { 11 } /var/keys // folder for config files
    #F: { 12 } /var/tmp // folder for temporary file
    #F: { 13 } /var/tmp // folder for keyfiles
    #F: { 21 } /dev/dvb/adapter0/ca0 // ca device
    #F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
    #F: { 23 } /dev/dvb/adapter0/demux0 // demux device
    #F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
    #F: { 41 } /dev/sci0 // STB04xxx slot1
    #F: { 42 } /dev/sci1 // STB04xxx slot1
    #F: { 43 } /dev/tts/0 // rs232 com1
    #F: { 44 } /dev/tts/1 // rs232 com2

    # For overclocking freaks, Clocking internal STB04xxx slots with:
    # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
    # ****** works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
    # The Dream has not a clean clock signal, some cards that are sensitive will
    # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
    # On other STB04xxx recievers the same cards work with 6.30MHz
    #
    #F: { 51 } 02 // xxxxxxxx
    #F: { 52 } 03 // seca
    #F: { 53 } 03 // viaccess
    #F: { 54 } 03 // nagra
    #F: { 55 } 03 // crypto
    #F: { 57 } 03 // conax
    #F: { 58 } 03 // nds

    # force a name change of the season or sssp rs232 device
    #F: { 45 } /dev/ttyS1

    # set stay alive ping time in seconds (default is 300)
    #F: { A0 } 300


    # disable direct serial port I/O access on 80x86cpus (win and linux)
    # direct port i/o is used to set unusual Baudrates, if you want to
    # a 3.579MHz card in a 6.000MHz reader etc ...
    #
    # Enabled (A1=0) is the default setting, has always been !
    #
    # Disable (set to 1) it ONLY if you have problems with ioperm or you want
    # to use a usb-to-rs232 smartcard reader
    #
    #F: { A1 } 0

    Si apropos sunt foarte curios cati dintre voi foloseste multicams (mai multe sloturi din dream) nu de alta dar observ ca la voi " V: { F0 30 } " ceea ce inseamna multicam sau o lasati asa fara nici o rost?

  13. #13
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jan 2008
    Location
    40km NW de Bucuresti
    Posts
    496
    Posts Thanks / Likes

    Default

    Salutari la toti.

    Ma aflu in aceeasi situatie ca georgexx, adica am un dream 500S, conexiune la net prin router , dreamul are net etc. Am card local pt 39E, dar nu ma descurc cu gbox-ul. Am instalata ultima imagine Gemini4.31 si mi-am facut cont la no-ip. Am instalat gbox-ul in dream dar mai departe nu ma descurc, asa ca daca este cineva pe aici care are putin timp sa ma ajute si pe mine i-as fi recunoscator.

  14. #14
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Constanta
    Posts
    189
    Posts Thanks / Likes

    Default

    Quote Originally Posted by costinitalia View Post
    daca iti trebuie numai sa folosesti liniutele nu...

    sa nu uiti sa maresti distanta cardurilor....eu il am pe I:2 pentru ca am cacalau si merge bine si X:0A cate 10carduri pentru fiecare provider.

    ps: sa nu spui la lume ca ti-am cerut 50euro pentru ca ti-am configurat gboxul


    @didi asa este. Gboxul asta 2.1b este doar pentru gemini. fiecare imagine cu scriptul lui
    Am pus X:0A si I:2 merge bine .Am si card focussat pentru ca trebuie nu sa dau si eu ceva ca asa e normal.Decat deloc e bun si asta.
    PS.Pai asteapta sa tii trimit.. Glumesc sa nu o luati in serios.Multumesc tuturor care ma ajuta.

  15. #15
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Posts
    23
    Posts Thanks / Likes

    Default

    Quote Originally Posted by EXCALIBUR View Post
    Salutari la toti.

    Ma aflu in aceeasi situatie ca georgexx, adica am un dream 500S, conexiune la net prin router , dreamul are net etc. Am card local pt 39E, dar nu ma descurc cu gbox-ul. Am instalata ultima imagine Gemini4.31 si mi-am facut cont la no-ip. Am instalat gbox-ul in dream dar mai departe nu ma descurc, asa ca daca este cineva pe aici care are putin timp sa ma ajute si pe mine i-as fi recunoscator.
    citeste aici , poate te ajuta

    http://www.rdi-board.com/showthread....ght=boom+dolce
    si
    http://www.rdi-board.com/showthread....ght=boom+dolce

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top