Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 5 of 5
  1. #1
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default ce stie sa faca mbox?

    mbox
    ca nu am inteles nimic din manual, si am fost si pe forum la ei dar nu am acces la sectiunea CS

  2. #2
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    cam asta am gasit...

    Mbox opens definetely nagra 3 cards. don't read the card directly, but it opens nagra 3 cards and I'm talking about rom142 for tvcabo and rom 180 for D+, both on hispassat 30şW:
    <-CW from 192.168.010.128 (9B30) FOR ME, (<-1) (390 ms)
    [15:19:58] ===== Network ECM on CaID 0x1802, pid 0x03EB ====
    [15:19:58] prov: 9B30
    [15:19:58] CW0: 92 F6 20 A8 AB 1B 35 FB
    [15:19:58] CW1: EE 63 2A 7B A8 26 EE BC
    [15:19:58] =================================================
    I think it's enough to prove it.

    Unfortunately this emu is very young and allot of things are missing like ecm.info directly on /tmp. you can only get it activating the Z line for debug.txt that is a parameter that cannot be changed without restarting the emu.

    Another thing is that is crashes easy with allot of peers like gbox can handle. With a few peers works fine.

    I also would like to request the file emu.cfg, even having tested without it. If someone has it please post it.

    Lets see what caomes next on second beta release.

    Satelite Regards,


  3. #3
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    hai ca mai gasii ceva

    A new emu using gbox protokoll has surfaced.No improvments of unsuported cards but new parabels in cwshare and gbox.cfg.I would caution people not to use this in our gbox network untill its proven to work 100%.It has the potensial to screw things up big time.

    //cwshare.cfg some new things i added

    // IMPORTANT !
    // About D line in cwshare.cfg file ...
    // Now you can set what provids/boxids you want to reshare with another peer(s)
    // This is standard D line D: { IP { port1 port2 { pass { level1 level2 }}}}
    // This is my new upgraded D line
    // D: { IP { port1 port2 { pass { level1 level2 }}}}
    // { 0000 } { 0 } //send filter
    // { 0000 } { 0 } //received filter
    // D: { IP { port1 port2 { pass { level1 level2 }}}}
    // { xxyy !in hex!} { provid-boxid-boxid;provid;provid-boxid; ...!in hex!} //send filter
    // { xxyy !in hex!} { provid-boxid-boxid;provid;provid-boxid; ...!in hex!} //received filter
    // for both brascets
    // xx -> 00 disabled
    // xx -> 01 allow only this cards for provid to be reshared (1st brascet)/received (2nd brascet)
    // xx -> 02 denied only this cards for provid to be reshared(1st brascet)/received (2nd brascet)

    // yy -> how much provids is in next brascet dont caculate boxids
    // example:
    // D: { IP { port1 port2 { pass { level1 level2 }}}}
    //{ 0102 } { 0001006A;0001006C-0A0A-0B0B; }
    //{ 0102 } { 00010080;00010081-0A0A-0B0B; }
    //
    // { 0102 } { 0001006A;0001006C-0A0A-0B0B; }
    // xx is 01 ,ALL cards for (0001006A) provid is SENT to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) will NOT be sent!
    // yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
    //
    //
    // { 0102 } { 00010080;00010081-0A0A-0B0B; }
    // xx is 01 ,ALL cards for (00010080) provid is RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, ALL others provids will be IGNORED!
    // yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
    //
    // example:
    // D: { IP { port1 port2 { pass { level1 level2 }}}}
    ///{ 0202 } { 0001006A;0001006C-0A0A-0B0B; }
    // { 0202 } { 00010080;00010081-0A0A-0B0B; }
    //
    // { 0202 } { 0001006A;0001006C-0A0A-0B0B; }
    // xx is 02 ,ALL cards for this (0001006A) provid is NOT sent to peer AND cards with boxid 0A0A,0B0B for provid 0001006C, ALL others provids(cards) are !
    // yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
    //
    //
    //{ 0202 } { 00010080;00010081-0A0A-0B0B; }
    //xx is 02 ,ALL cards for (00010080) provid is NOT RECEIVED from peer AND cards with boxid 0A0A,0B0B for provid 00010081, all others provids will be received!
    //yy is 02 ,there is only 2 provids in next bracket dont caculate boxids
    //
    //
    //
    // NOTICE: MBOX WILL NOT COMPLAIN IF YOU USE OLD D LINE STYLE !


    //Working with TCP protocol
    //Just rename D with TCP,example
    //TCP: { IP { port1 port2 { pass { level1 level2 }}}}
    //
    // or my upgraded D line
    //
    //TCP: { IP { port1 port2 { pass { level1 level2 }}}}
    //{ xxyy !in hex!} { provid-boxid-boxid;provid;provid-boxid; ...!in hex!}
    //{ xxyy !in hex!} { provid-boxid-boxid;provid;provid-boxid; ...!in hex!}
    //
    //
    //
    //IMPORTANT: NOT YET INPLEMENTED !









    //mbox.cfg EXPLANATION and EXAMPLE



    B: { 0 }

    //B: { x }
    //x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards (Windows and Linux)
    //x=1 -> enable
    //default disable


    Z: { 10 } { 127.0.0.1 8000 }

    // Z option -> control sending/writing current informations
    // Z: { xy } { IP port }
    // x=0 -> don't print time stamp (in console screen and in debug file)
    // x=1 -> print time stamp ( .... )
    // y=0 -> no writing/sending informations to debug file/destination IP
    // y=1 -> send informations to destination IP but not in debug file
    // y=2 -> write informations to debug file but don't send to destination IP
    // y=3 -> write/send informations to debug file/destination IP
    // IP port -> destination IP and UDP port where to send informations
    // no default



    #C: { 127.0.0.1 7999 }

    // C option -> control receiving some command messages localy or from another IP
    // C: { IP port }
    // IP-> your local IP or you DNS
    // port -> on what port you will be waiting command messages
    // no default




    R: { 100000 }

    // R option -> Time out interval for (RE)SENDING hello message to peer(s) in seconds
    // (resend hello message every (X) seconds to EVERY peer(s))
    // R: { seconds }
    // default 1 hour




    U: { 1 }

    // U options -> Update peer(s) IP if it changes while peer still resending ecms/cw etc.. information
    // default only on hello message peer(s) IP are updated !
    // U: { x }
    // x=0 -> disabled
    // x=1 -> enabled
    // default disabled



    L: { 1 }

    // L option -> how to mbox menage virtual card(s) with level 0
    // ( only for peer(s) who have and can share virtual cards but don't want to use LEVEL 0 card(s) for them self)
    // L: { x }
    // x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
    // x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
    // default 1




    K: { 0 }

    // K option -> where is emu.cfg,cwshare.cfg,mbox.cfg files FOR DREAMBOX
    // K: { x }
    // x=0 -> in /var/keys
    // x=1 -> in /var/tmp
    // default 0
    // NOTE: For Windows and Linux it can be in /var/keys or in folder where is mbox.? file



    S: { 1 }

    // S option -> how to sort cards
    // S: { x }
    // x=1 -> distance sort
    // x=2 -> level sort
    // x=3 -> distance+level sort
    // default 1



    E: { 1 }

    // E option -> disable same cards from peers
    // E: { x }
    // x=0 -> use same cards(boxids) from peers
    // x=1 -> don't use same cards(boxids) from peers
    // default 1


    M: { 0 }

    // M option -> Mode option
    // M: { x }
    // x=0 -> local mode no NET
    // x=1 -> NET mode
    // default 0


  4. #4
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    //mbox.cfg:

    B: { 0 }
    //B: { x }
    //x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards (Windows and Linux)
    //x=1 -> enable
    //default disable

    Z: { 10 } { 127.0.0.1 8000 }
    // Z option -> control sending/writing current informations
    // Z: { xy } { IP port }
    // x=0 -> don't print time stamp (in console screen and in debug file)
    // x=1 -> print time stamp ( .... )
    // y=0 -> no writing/sending informations to debug file/destination IP
    // y=1 -> send informations to destination IP but not in debug file
    // y=2 -> write informations to debug file but don't send to destination IP
    // y=3 -> write/send informations to debug file/destination IP
    // IP port -> destination IP and UDP port where to send informations
    // no default

    C: { 127.0.0.1 7999 }
    // C option -> control receiving some command messages localy or from another IP
    // C: { IP port }
    // IP-> your local IP or you DNS
    // port -> on what port you will be waiting command messages
    // no default

    R: { 100000 }
    // R option -> Time out interval for (RE)SENDING hello message to peer(s) in seconds
    // (resend hello message every (X) seconds to EVERY peer(s))
    // R: { seconds }
    // default 1 hour

    U: { 1 }
    // U options -> Update peer(s) IP if it changes while peer still resending ecms/cw etc.. information
    // default only on hello message peer(s) IP are updated !
    // U: { x }
    // x=0 -> disabled
    // x=1 -> enabled
    // default disabled

    L: { 1 }
    // L option -> how to mbox menage virtual card(s) with level 0
    // ( only for peer(s) who have and can share virtual cards but don't want to use LEVEL 0 card(s) for them self)
    // L: { x }
    // x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
    // x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
    // default 1

    K: { 0 }
    // K option -> where is emu.cfg,cwshare.cfg,mbox.cfg files FOR DREAMBOX
    // K: { x }
    // x=0 -> in /var/keys
    // x=1 -> in /var/tmp
    // default 0
    // NOTE: For Windows and Linux it can be in /var/keys or in folder where is mbox.? file

    S: { 1 }
    // S option -> how to sort cards
    // S: { x }
    // x=1 -> distance sort
    // x=2 -> level sort
    // x=3 -> distance+level sort
    // default 1

    E: { 1 }
    // E option -> disable same cards from peers
    // E: { x }
    // x=0 -> use same cards(boxids) from peers
    // x=1 -> don't use same cards(boxids) from peers
    // default 1

    M: { 0 }
    // M option -> Mode option
    // M: { x }
    // x=0 -> local mode no NET
    // x=1 -> NET mode
    // default 0


  5. #5
    Moderator Expert
    Join Date
    Jul 2006
    Location
    blowfish me....
    Posts
    2,472
    Posts Thanks / Likes

    Talking

    io n-am gasit
    io -am testat, ultimul ce il aveau ei acolo din 23.01.2008
    concluziile sunt: E VARZAp)
    -nu merge langa gbox , tre sterse toate fisierele ce refera sau au nume de gbox din etc scrpits bin si unde or mai fi , ramane numai cwshare.
    -tre redenumit cam id daca nu porneste la 150 nu 1550 sau cat or fi avand ei acolo la scam.
    si dat nume pt user altfel mumu in blue pannel.
    -facut update caid sa se vada mbox in blue pannel , si oprit orice alt emu.
    -pornit pt inceput din telnet sa se vada ca a pornit au ba.
    -restart la dm sa porneasca numai el sg.
    -se leaga destul de greu , numara toate liniile din gbox parca ar numara boabe de fasole.
    -a nu se folosi cu multe perruri , si asha nu le vede(din 148 a vazt 12 max)
    -nu stie citi cardurile , chiar pornit si cu peeruri online 10-12 cate or fi fost nu are nici un card citit.
    -se considera mai destept ca orice gbox nu face diferente , numai intre 2.25 si 21 care il vede/le vede toate 2.0
    -nu a decodat nimik:P))))))

    sincer , oi fi eu newbie.... dar nu recomand la nimeni inca pana nu iese din teste , a da si in niciuncaz a nu se schimba cu 2.1b pt nimik in lume:PPP

    P.S.oate ma supar si fac io sbox:P) (denumire corecta , sops box) - recomand a se citi dictionarul limbii bilingve:P)

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top