Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 8 of 8
  1. #1
    Junior Member Teacher
    Join Date
    Jun 2007
    Location
    26.12°E / 44.42°N
    Posts
    473
    Posts Thanks / Likes

    Default gbox & emu simultan - este posibil ?

    salutare tuturor,
    citeva sfaturi pentru un incepator, va rog

    am un dm600 pe care am instalat gp 4.0, am dat jos citeva camuri de pe serverul blue-panel.com si intr-un final am adaugat si gbox (am un card local pe care nu am reusit sa-l citesc altfel)
    pentru moment experimentez conexiunea gbx local, prin router/lan, cu o placa pci compatibila bda si am observat ca atunci cind comut din meniul bp din gbx intr-un oarecare emu, placa pci nu mai poate citi cardul
    fenomenul l-am inteles, dar intrebarea este: e posibil sa se ruleze simultan pe un dreambox cam pt decodare si gbx pt share ? exista vreo setare deosebita, trebuie modificate scripturile de pornire pt camuri ?
    inca nu am reusit sa-mi dau seama..


    va multumesc

  2. #2
    Senior Member Expert
    Join Date
    Jan 2005
    Posts
    1,781
    Posts Thanks / Likes

    Wink

    este posibil de forma uramtoare :
    NewCs + Gbox + cs2gbox si aici las scripul:

    gbox_cam.sh
    #
    CAMNAME="Gbox+NewCS"
    USERNAME=""
    ZAPTIME=1
    CAMID=970
    DVBSET=0
    INFOFILE="ecm.info"
    # end


    # This method cleans up /tmp folder of gbox files
    remove_tmp ()
    {
    rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
    }

    # This method starts cardserver_6.5 > CS2Gbox > Gbox (That order)
    start_cam ()
    {
    /var/script/AES_Gbox.sh &
    sleep 5
    /var/bin/mgcamd &
    sleep 4
    /var/bin/newcs &
    sleep 10
    /var/bin/cs2gbox &
    sleep 2
    /var/bin/gbox &
    }

    # This method stops newcs cs2gbox and gbox and then calles the tmp cleanup method
    stop_cam ()
    {
    touch /tmp/gbox.kill
    killall -9 mgcamd
    /bin/prockill newcs
    /bin/prockill cs2gbox
    /bin/prockill gbox
    killall -9 newcs cs2gbox 2> /dev/null
    remove_tmp
    }

    case "$1" in
    start)
    echo "[SCRIPT] $1: $CAMNAME"
    start_cam
    ;;
    stop)
    echo "[SCRIPT] $1: $CAMNAME"
    stop_cam
    ;;
    restart)
    echo "Restaring $CAMNAME"
    stop_cam
    start_cam
    ;;
    *)
    "$0" stop
    exit 1
    ;;
    esac

    exit 0
    INFOFILELINES=1111111111000000



    Antes de postear en este foro, lea las normas y preséntese. Y al presentarse respete las normas Nş 1. Gracias

    NORMAS: http://www.rdi-board.com/showthread.php?t=59064

  3. #3
    Moderator Expert
    Join Date
    Jul 2006
    Location
    blowfish me....
    Posts
    2,474
    Posts Thanks / Likes

    Talking

    sau altfel :

    1:gbox+mgcamd (am denumit exact tipul si numele camului ca am mai multe :P)) )

    Code:
    #!/bin/sh
    ########################################
    ###### Powered by The Gemini Team ######
    ### http://www.i-have-a-dreambox.com ###
    ########################################
    # camid #
    # 0000 = Commom Interface #
    # 0001->0199 = for User Experiment #
    # 0199 = Dccamd #
    # 0200->0299 = Fbiss #
    # 0300->0399 = Camd3 #
    # 0400->0499 = Camx #
    # 0500->0599 = Camx-radegast-cs #
    # 0600->0699 = Evocamd #
    # 0700->0799 = Evocamd-ronlad-cs #
    # 0800->0899 = Mgcamd #
    # 0900->0999 = Mgcamd-ronald-cs #
    # 1000->1099 = Newcamd #
    # 1100->1199 = Newcamd-ronald-cs #
    # 1200->1299 = Newcamd-spider #
    # 1300->1399 = Radegast #
    # 1400->1499 = Ronald-cs #
    # 1500->1599 = Scam #
    # 1600->1699 = Scam-ronald-cs #
    # 1700->1799 = Cardserver #
    # 1800->1899 = Mgcamd with Cardserver #
    # 9800->9899 = reserved #
    # 9900->9999 = reserved #
    ########################################
    CAMNAME="Gbox+Mgcamd"
    USERNAME="Gbox+Mgcamd"
    ZAPTIME=8
    CAMID=0010
    DVBSET=1
    INFOFILE="ecm.info"
    # end
    
    
    # This method cleans up /tmp folder of gbox files
    remove_tmp ()
    {
    rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
    rm -rf /tmp/ecm.info /tmp/pid.info /tmp/cardinfo
    
    }
    
    
    start_cam ()
    {
    /var/bin/mgcamd_1.26 &
    sleep 3
    /var/bin/gbox2.1bp &
    }
    
    stop_cam ()
    {
    touch /tmp/gbox.kill
    killall -9 mgcamd_1.26
    /usr/bin/prockill gbox2.1bp
    #killall -9 newcs cs2gbox advemu.bin 2> /dev/null
    
    remove_tmp
    }
    
    case "$1" in
    start)
    echo "[SCRIPT] $1: $CAMNAME"
    start_cam
    ;;
    stop)
    echo "[SCRIPT] $1: $CAMNAME"
    stop_cam
    ;;
    restart)
    echo "Restaring $CAMNAME"
    stop_cam
    start_cam
    ;;
    *)
    "$0" stop
    exit 1
    ;;
    esac

    sau ....


    2. cccam+gbox (nu ii vad sensul , nu folosesc peeruri in cccam , dar nah ... cam asha ar arata si parca e mai bun mgcamul la faza cu AU si cu key)

    Code:
    #!/bin/sh
    ########################################
    ###### Powered by The Gemini Team ######
    ### http://www.i-have-a-dreambox.com ###
    ########################################
    # camid #
    # 0000 = Commom Interface #
    # 0001->0199 = for User Experiment #
    # 0199 = Dccamd #
    # 0200->0299 = Fbiss #
    # 0300->0399 = Camd3 #
    # 0400->0499 = Camx #
    # 0500->0599 = Camx-radegast-cs #
    # 0600->0699 = Evocamd #
    # 0700->0799 = Evocamd-ronlad-cs #
    # 0800->0899 = Mgcamd #
    # 0900->0999 = Mgcamd-ronald-cs #
    # 1000->1099 = Newcamd #
    # 1100->1199 = Newcamd-ronald-cs #
    # 1200->1299 = Newcamd-spider #
    # 1300->1399 = Radegast #
    # 1400->1499 = Ronald-cs #
    # 1500->1599 = Scam #
    # 1600->1699 = Scam-ronald-cs #
    # 1700->1799 = Cardserver #
    # 1800->1899 = Mgcamd with Cardserver #
    # 9800->9899 = reserved #
    # 9900->9999 = reserved #
    ########################################
    CAMNAME="Gbox+Ccamd"
    USERNAME="Gbox+Ccamd"
    ZAPTIME=8
    CAMID=0011
    DVBSET=1
    INFOFILE="ecm.info"
    # end
    
    
    # This method cleans up /tmp folder of gbox files
    remove_tmp ()
    {
    rm -rf /tmp/*info* /tmp/*gbox* /tmp/*online* /tmp/*share* /tmp/Newcs* /tmp/atack* /tmp/debug*
    rm -rf /tmp/ecm.info /tmp/pid.info /tmp/cardinfo
    
    }
    
    
    start_cam ()
    {
    /var/bin/CCcam_2.0.4 &
    sleep 3
    /var/bin/gbox2.1bp &
    }
    
    stop_cam ()
    {
    touch /tmp/gbox.kill
    killall -9 CCcam_2.0.4
    /usr/bin/prockill gbox2.1bp
    #killall -9 newcs cs2gbox advemu.bin 2> /dev/null
    
    remove_tmp
    }
    
    case "$1" in
    start)
    echo "[SCRIPT] $1: $CAMNAME"
    start_cam
    ;;
    stop)
    echo "[SCRIPT] $1: $CAMNAME"
    stop_cam
    ;;
    restart)
    echo "Restaring $CAMNAME"
    stop_cam
    start_cam
    ;;
    *)
    "$0" stop
    exit 1
    ;;
    esac
    nu sunt ale mele , nu is io asha capabil , dar sunt vero ...)))

  4. #4
    Junior Member Teacher
    Join Date
    Jun 2007
    Location
    26.12°E / 44.42°N
    Posts
    473
    Posts Thanks / Likes

    Default AES_Gbox.sh

    super, va multumesc frumos!

    @obywans, exista in scriptul indicat de tine un call catre un alt script - AES_Gbox.sh
    am cautat pe net, am gasit unul, doar ca era specificat ca este creat pt un dm7020 - as putea avea o problema daca-l folosesc, sa mai caut altul chiar pt dm5/600 ?
    sau sa comentez linia pur si simplu si sa-l ignor?

  5. #5
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Quote Originally Posted by imeDB View Post
    salutare tuturor,
    citeva sfaturi pentru un incepator, va rog

    am un dm600 pe care am instalat gp 4.0, am dat jos citeva camuri de pe serverul blue-panel.com si intr-un final am adaugat si gbox (am un card local pe care nu am reusit sa-l citesc altfel)
    pentru moment experimentez conexiunea gbx local, prin router/lan, cu o placa pci compatibila bda si am observat ca atunci cind comut din meniul bp din gbx intr-un oarecare emu, placa pci nu mai poate citi cardul
    fenomenul l-am inteles, dar intrebarea este: e posibil sa se ruleze simultan pe un dreambox cam pt decodare si gbx pt share ? exista vreo setare deosebita, trebuie modificate scripturile de pornire pt camuri ?
    inca nu am reusit sa-mi dau seama..


    va multumesc
    In primul rand, dezinstaleaza tot ce nu folosesti, camurile instalate si nefolosite iti pot da multe dureri de cap.
    Inteleg ca deja folosesti un cam pentru care ai keitze. Daca este MGcamd, foloseste metoda scrisa de Sinangel, merge sigur si in plus, MGCamd sta destul de bine la actualizarea keitzelor.
    Scriptul merge pe orice Dream, nu conteaza ca a fost creat pt un alt model de Dream.
    Bafta!

  6. #6
    Moderator Expert
    Join Date
    Jul 2006
    Location
    blowfish me....
    Posts
    2,474
    Posts Thanks / Likes

    Default

    @SatWien io-ti mersi pt testul de incredere :P)

    iar @imeDb citeste si asta

    http://www.rdi-board.com/showthread.php?t=58961

    bafta!

  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Location
    Cluj Napoca
    Posts
    307
    Posts Thanks / Likes

    Default

    Folosind exemplul dat de @sinangel am reusit sa pornesc gbox-ul si mgcamd -ul simultan pe DM.

    Din pacate receptorul foloseste doar gbox -ul si nu emulatorul. Am incercat sa deschid Multivision-urile de pe Hotbird care merg in mod normal cu emulatorul dar cand am ambele pornite (gbox si mgdcam) nu mai merg.

    Mai exista ceva setare care trebuie sa o fac?

  8. #8
    Junior Member Teacher
    Join Date
    Aug 2006
    Location
    Timisoara
    Posts
    349
    Posts Thanks / Likes

    Default

    gbox si mgcamd n-am reusit sa le pornesc in paralel (si sa si functioneze, adica sa decodeze alternativ fara sa le opresc pe rand) decat daca in prealabil e pornit cs2gbox-ul (cu scriptul aes_gbox inaintea lui)...

    nu stiu daca are sau nu importanta, dar doar asa mi-a mers


    Forza MILAN!

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top