Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 7 of 7
  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2007
    Location
    LiSbOa,Portugal
    Posts
    175
    Posts Thanks / Likes

    Cool tv cabo pe dreambox5620,500,600pvr,7000 si 7020...

    Pt posesorii de dreambox-poate va ajuta cu ceva...These files are all you need to make your rom142 cabo nagra 3 card to work on dreamboxes 5620, 500, 600PVR, 7000 and 7020 models. 1. Paring the card with your receiver: File found on: var\tuxbox\config\newcs.xml Edit the file newcs.xml to change the Boxkey and RSA of your ROm142 nagra card. TIP: Use MS Word to edit the newcs.xml file then just click save once you finished. Also you may change the IP 127.0.0.1 to the IP of your dreambox if you wish. 2. Changing the IP connection of radegast to newcs.xml ports. File found on: var\etc\Radegast.cfg Use wordpad to edit this file. Go to this section: ------------------------ #remote servers net shares = 1 #net share i = ip-or-domain:socketroto[usernameassword:keyhex] # where 'proto' = 1 for v4 rdgd server, 0 for older rdgd server and 2 for nwecamd server #example 1 => radegast server connect: net share 1 = 127.0.0.1:777:0 -------------------- 3. You may wish to change the IP 127.0.0.1 to the IP of your Dreambox where the card is. If you have another Dreambox in your house with another rom142 with a diffirent rom142 and with to share the packages bettween them then you may ass another Net share 1 = and the IP of the second dreambox :777:0 You may also use this setup to read the rom142 card from a windows or linux based newcs program on your PC in case you need the card slot on your dreambox for another card. 4. INSTALLING Install files after edited via an FTP program like DCC into your Dreambox as listed: All file make attributes/CHMOD 755 Files to do to directories: var/bin/camd.rdgd var/bin/dem var/bin/newcs_1.20 var/bin/v4b40.PPC var/radegast.cfg var/script/gbox_radegast_newcs_cam.sh var/tuxbox/config/newcs.xml You MUST not have any other radegast scripts cam scripts on the var/script directory. If there is one then delete it and leave only the on listed here. 5. After setting the CHMOD to 755 on all files do a reboot on the dreambox and on restart insert the rom142 on your Slot 1 card reader then go to the BLue Pannel, select the Radegast_rom142 cam and activate it. A few seconds latter if should see the image. Note that the zapping can be slower than other cams. 1 to 3 seconds between channels is normal. Good luck Big thx to Jobusca Download here: http://www.sendspace.com/file/dtnlv6 bafta
    Last edited by adrianoM; 14th October 2007 at 19:19.
    PixxPlus,Opentel DCS3000V,PowerboxTVcabo

  2. #2
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    1. Cred ca tutorialul e interesant, dar e foarte greu de citit, inainte de a-l posta, trebuia sa-l editezi putin si sa inserezi paragrafe.
    2. Locul tutorialului era la Dreambox/DBox2.

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2007
    Location
    LiSbOa,Portugal
    Posts
    175
    Posts Thanks / Likes

    Default

    Quote Originally Posted by SatWien View Post
    1. Cred ca tutorialul e interesant, dar e foarte greu de citit, inainte de a-l posta, trebuia sa-l editezi putin si sa inserezi paragrafe.
    2. Locul tutorialului era la Dreambox/DBox2.
    mersi fain,sorry!
    PixxPlus,Opentel DCS3000V,PowerboxTVcabo

  4. #4
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Tutorialul e chiar interesant, pacat ca e greu de citit. Daca mai gasesti ceva similar, posteaza, dar la sectiunea potrivita.

  5. #5
    Moderator Expert
    Join Date
    Apr 2003
    Location
    District Nr. IX.
    Posts
    6,176
    Posts Thanks / Likes

    Default

    L-am adus aici la locul lui, dar am uitat sa-l editez un pic... Rog un moderator de la aceasta sectiune sa intre putin cu TAB-ul in text sa fie lizibil.
    Last edited by [email protected]; 14th October 2007 at 20:31.
    Day by day - opiniile mele
    "Never argue with idiots. People can confuse you with them."
    ---------------------------------------------------------
    DM 7020S; HSS-1160NA; Offset 1,2 Al +
    Moteck DigiPower SG-2100
    (53°E - -30°W) + Hama Lypsi HQ Universal Single LNBF

  6. #6
    zzzzzzzzzzzzz Expert
    Join Date
    Dec 2005
    Location
    rdi
    Posts
    4,384
    Posts Thanks / Likes

    Default

    These files are all you need to make your rom142 cabo nagra 3 card to work on dreamboxes 5620, 500, 600PVR, 7000 and 7020 models.
    1. Paring the card with your receiver: File found on: var\tuxbox\config\newcs.xml Edit the file newcs.xml to change the Boxkey and RSA of your ROm142 nagra card. TIP: Use MS Word to edit the newcs.xml file then just click save once you finished. Also you may change the IP 127.0.0.1 to the IP of your dreambox if you wish.

    2. Changing the IP connection of radegast to newcs.xml ports. File found on: var\etc\Radegast.cfg Use wordpad to edit this file. Go to this section: ------------------------ #remote servers net shares = 1 #net share i = ip-or-domain:socketroto[usernameassword:keyhex] # where 'proto' = 1 for v4 rdgd server, 0 for older rdgd server and 2 for nwecamd server #example 1 => radegast server connect: net share 1 = 127.0.0.1:777:0 --------------------

    3. You may wish to change the IP 127.0.0.1 to the IP of your Dreambox where the card is. If you have another Dreambox in your house with another rom142 with a diffirent rom142 and with to share the packages bettween them then you may ass another Net share 1 = and the IP of the second dreambox :777:0 You may also use this setup to read the rom142 card from a windows or linux based newcs program on your PC in case you need the card slot on your dreambox for another card.

    4. INSTALLING Install files after edited via an FTP program like DCC into your Dreambox as listed: All file make attributes/CHMOD 755 Files to do to directories: var/bin/camd.rdgd var/bin/dem var/bin/newcs_1.20 var/bin/v4b40.PPC var/radegast.cfg var/script/gbox_radegast_newcs_cam.sh var/tuxbox/config/newcs.xml You MUST not have any other radegast scripts cam scripts on the var/script directory. If there is one then delete it and leave only the on listed here.

    5. After setting the CHMOD to 755 on all files do a reboot on the dreambox and on restart insert the rom142 on your Slot 1 card reader then go to the BLue Pannel, select the Radegast_rom142 cam and activate it. A few seconds latter if should see the image. Note that the zapping can be slower than other cams. 1 to 3 seconds between channels is normal. Good luck Big thx to Jobusca Download here: http://www.sendspace.com/file/dtnlv6


  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2007
    Location
    LiSbOa,Portugal
    Posts
    175
    Posts Thanks / Likes

    Default

    Costinitalia ,mersi pt ajutor!
    Last edited by adrianoM; 16th October 2007 at 03:03.
    PixxPlus,Opentel DCS3000V,PowerboxTVcabo

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top