Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 10 EUR (10%)
Donate to support this site...

Results 1 to 2 of 2
  1. #1
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Jun 2007
    Posts Thanks / Likes

    Default dreambox 500s newbie problem

    i already have 2.3 m c-band dish pointed to asiasat3 to receiver all fta channel using a cheap SPACE brand fta digital satellite receiver..with this receiver i am getting all those fta channels loud and clear..recently just for hobby i bought a dreambox 500s receiver so that i could do recordinng to my computer and lot other fun stuff..
    i have done all that was mentioned in dreambox's got default enigma image..
    i put the lnb cable to dreambox and turn it on..
    i select asiasat3 from list of satellites in menu and direct lnb to satellite setting..
    and when i do automatic transponder scan ,it doesn;t find any doesn;t lock up..the signal quality is shown 78% in menu,but there is not tick on the trasnponder lock..
    can some one guide me what i am missing here..i have got this lnb.
    when i use my space receiver i get all channels..i want to receive same channels with dreambox too..

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2006
    Posts Thanks / Likes


    Check you LNB settings in DM.You need to use Non Standard user defined configuration.Enter 5150 in H,L & Treshold



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Back to Top