Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 15 of 15
  1. #1
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default Pana la DM8000 ..ia vedeti Kathrein ufs 910

    Kathrein ufs910 este un receiver HDTV cu 16Mb Flash 64Mb RAM ..cu USB si NET si un firmware bazat pe Kernelul Linux 2.6.9. Este o scula excelenta ! n-o sa va povestesc despre meniurile luminoase , nimic despre un tunner de exceptie ... va voi spune ceva nou si interesant ... am instalat versiunea firmware 1.1.3 "bricolata" de echipa SF Team astfel incat stie in plus fata de firmware-ul original :

    - suporta interfata de retea ... cu un IP fix 192.168.1.25 ( kernelul nu are suport DHCP )
    - suporta instalarea de "addon"-uri ( ipkg)
    - suporta emulatorul Radegast si ...merge PW HD !

    Pe pagina oficiala a celor de la SF Team http://sfteam.anfy.cz/images.htm
    se gasesc o parte din aceste noutati...si in sectiunea Kathrein a celor de la Dream Pirates http://www.dream-pirates.net/wbb2/bo...d97e 20befc4e
    unde insa trebuie sa va inregistrati. Si mai este ceva ...se poate cumpara in RO pentru 310 euro (1ncl TVA) de la Romkatel.

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2003
    Posts
    290
    Posts Thanks / Likes

    Default

    Am pus imaginea de la SF team. Am conectat receptorul printr-un cablu de retea cross.Am pus Ip-ul la calculator:
    IP: 192.168.1.25
    Netmask: 255.255.255.0
    Gateway: 192.168.1.1
    S-a conectat....
    In rest nu inteleg cum sa fac. Te rog explica-mi.





    unpack with full path to USB flash and insert to front USB port

    Use Emergency Update ( box power off , press Menu button

    on front panel and switch power on)

    Kernel is not supported DHCP, network is cofigured with this setting:
    IP: 192.168.1.25
    Netmask: 255.255.255.0
    Gateway: 192.168.1.1

    ip addres exchange in file: /usr/etc/network/interface

    ftp/telnet
    root:kathrein

    webserver
    http://192.168.1.25
    root:kathrein


    If you want install problem

    ERASE MTD OVER BOOTLOADER:
    1. CTRL+Z over start box - serial console
    2. erase startaddr endaddr

    - config = setting
    erase A0200000 A029ffff

    - rootfs
    erase A02A0000 A04Dffff

    - app
    erase A04E0000 A0Adffff

    - data
    erase A0C00000 A0ffffff

  3. #3
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default

    a) pregatiti USB Stick-ul in acelasi mod ca la update standard
    b) dupa update interfata de retea ( ethernet) devine activa si recunoscuta pe IP-ul fix 192.168.1.25 intrucat aceasta versiune de kernel nu suporta DHCP deasemenea este suportata functia de instalare “addon” ( ipckg)
    c) schimbarea IP-ului este posibila editand fisierul /usr/etc/network/interface
    d) configurati clientul preferat FTP astfel 192.168.1.25 si root / kathrein
    e) transferati imaginea tip pachet ( bz2) a emulatorului Radegast pe Kathrein in subdirectorul /usr/local/etc
    f) de pe telecomanda executati secventa power off apoi on
    g) in acest moment emulatorul este instalat si activ
    h) actualizarea fisierelor AutoRoll.key si SoftCam.key se face transferindu-le in directorul \usr\local\keys urmata de secventa off/on pe telecomanda pentru a restarta emulatorul ( atentie la acuratetea fisierului SoftCam.key ! )

  4. #4
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default

    Si acum cateva detalii despre facilitatile instalate , detalii provenind de la echipa ceha a baietilor de la SF Image :

    - emulatorul este mult mai mult decat atit ! el include : cardserver , emulator, interfata de comunicatie
    - cardserverul are suport de sharing ! informatiile de configurare se gasesc in fisierul de configurare radegast.cfg atit pentru partea de server cat si pentru clienti ( http://ip.receiver:8888)
    - emulatorul foloseste urmatoarele categorii de fisiere : SoftCam.key ( codurile operationale) , AutoRoll.key ( contine RSA keys ) , Conax.key ( coduri pentru pachete codate in Conax ) si MK.key ( Master Key protocol pentru cs )
    - emulatorul implementeaza acealeasi sisteme de codare ca la Newcand : CW, N, B, I , S si C
    - in curand se va imprementa o interfata de configurare a CS

  5. #5
    cel mai frumos Mentor
    Join Date
    Apr 2004
    Location
    Cluj-Napoca
    Posts
    831
    Posts Thanks / Likes

    Default

    e singurul emulator valabil pentru el?

  6. #6
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default

    Fiind prima versiune ...aparuta la 2 luni dupa lansarea oficiala a receptorului ! este o excelenta realizare ! deocamdata doar el ...desi am credinta ca in curand ( 6luni maxim un an) vom avea o imagine SF completa bazata Enigma ...ca in cazul Relook/IPBox.

  7. #7
    Banned
    RDI - Board Banned Avatar

    Join Date
    Apr 2003
    Posts
    28
    Posts Thanks / Likes

    Default

    Conform cataloagelor care se distribuie in Paris la marile magazine de componente sat de catre Dream Multimedia , 8000 vine 100% la sf lui august (28-29).

  8. #8
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default

    Da pretul ? pretul cat o fi ? ca din zvonurili de pana acum ... va fi de rau !

  9. #9
    Gold Member Expert
    Join Date
    Feb 2005
    Posts
    4,738
    Posts Thanks / Likes

    Default

    Quote Originally Posted by mihaip View Post
    Da pretul ? pretul cat o fi ? ca din zvonurili de pana acum ... va fi de rau !
    se spune ca ar fi cca. 1000 EUR

  10. #10
    Safe User Expert
    Join Date
    May 2005
    Posts
    2,956
    Posts Thanks / Likes

    Default

    Quote Originally Posted by first_zipper View Post
    se spune ca ar fi cca. 1000 EUR
    Cam peste tot se vehiculeaza un pret intre 800-1000 Euro.Sa speram ca nu va fi valoarea cea mare.

  11. #11
    Banned Mentor
    RDI - Board Banned Avatar

    Join Date
    Oct 2006
    Location
    Unknown
    Posts
    819
    Posts Thanks / Likes

    Talking sal

    dar cu un humax HD , ma pot baga la un share...?

  12. #12
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default

    Humax HD ...nici o sansa ! asta este nou si interesant la Kathrein !

  13. #13
    Junior Member Teacher
    Join Date
    Jun 2006
    Location
    Bucuresti
    Posts
    205
    Posts Thanks / Likes

    Default

    Merge gbox-ul? Sau vreo sansa de gbox? Ca fara el nu prea ai canale HD la care sa te uiti...
    1.4 Al, 0.3 dB, Pozitioner Moteck+12",SS2,62E<->30W
    Parabola 2.2 m, Lnb Inverto 0,3 dB, Actuator 24", V-Box 2, VU+UNO, DM500S, BR-6574N Router
    1.15 Fe, 0.2 dB Maximum, HH SG 2100 (de vanzare)

  14. #14
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default Noutati ...

    Daca vizitati site-ul baietilor de la SF Team ...o sa remarcati ca dezvoltarea firmware-uluio Kathrein ...a urcat pe primul loc in interesul lor ! au si scos o versiune revizuita ..ultima era pe 07.07 ...azi a aparut una noua !
    http://sfteam.anfy.cz/images.htm

  15. #15
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2003
    Posts
    3,123
    Posts Thanks / Likes

    Default Sharing cu ufs910 !!!

    hi
    sharing 2 karten prem*** u. arena

    hier mal eine Anleitung wie man falls vorhanden seine Karten
    mit der Kathrein sharen kann

    für alle die es interesiert da ja momentan nur ein Emu rdgd 42rev6 existiert

    eine 2.te box oder pc_server solten vorhanden sein

    Beispiel Dreambox 7000 als server

    die radegast .cfg für die dreambox sollte so aussehen

    #
    # radegast.conf
    #
    # $Id: $
    #
    # Sample of configuration file for radegast V4 project
    #
    #

    # -------------------------------
    # Server configuration (for rdgd)
    # -------------------------------
    [rdgd]

    ecm op mode = both
    emm op mode = local
    # * filter EMM suport based on remote/local access. And possibility to disable
    # EMM support at all

    sw cache = 5
    ca cache = 5
    # * cache level for softemu and card mode. 0 = cache off
    # sw cache = when your serving others by your local rdgd soft emu ( k**s )
    # ca cache = when acting as a cardserver. This value should be at least
    # <max-number-of-connected-clients> * 2

    #emu mode = on
    # * on/off softemu mode

    #card mode = on
    # * on/off card mode

    #net port = 666
    # * TCP port waiting for remote connection. As (by default) this port
    # can handle _ONLY_ONE_ (!) remote connection the main use is
    # for connecting netpilot to the rdgd. But in "2-boxes only"environment
    # this port can be used directly for serving one remote connect.
    # In this case, howewer, "net ip" has to be changed to real IP address
    # of the box.

    net port = 777
    # * TCP port waiting for remote rdgd connections
    # NOTE: "net ip" has to be changed to real IP address
    # of the box to enable remote access

    net ip = 127.0.0.1
    # * IP address where rdgd is waiting for network connection.
    # By default, only connect from the same box is allowed.

    net server k** = 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF
    net protocol = v4
    net restricted = cards

    hosts allow =192.168.1.1, 192.168.1.100
    hosts allow =127.0.0.1, 127.0.0.100

    local cmd pipe = /var/tmp/rdgd.cmd


    # * Location of the cmd file

    softcam file = /var/keys/SoftCam.Key
    #softcam file alternative = SoftCam.alt
    #conax file = /var/keys/Conax.Key
    autoroll file = /var/keys/AutoRoll.Key
    #autoroll file alternative = AutoRoll.alt
    #mkeys file = /var/keys/MK.Key
    # * Location of the different k** files that can be used for emu proccessing
    #autoroll notifier = ./save.sh
    # * Possibility to call external app if autorolling catch new key(s)

    atr timeout = 2000

    readers = 2
    # * number of defined readers below

    reader 1 description = Upper card
    reader 1 type = dream
    reader 1 name = /dev/sci1
    reader 1 blocker = off
    reader 1 pushable = all
    reader 1 newcamd port = 10001
    reader 1 newcamd deskey = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    reader 2 description = Lower card
    reader 2 type = dream
    reader 2 name = /dev/sci0
    reader 2 blocker = off
    reader 2 pushable = all
    reader 2 pin = 0001
    reader 2 newcamd port = 10002
    reader 2 newcamd deskey = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    reader 3 description = Phoenix on console
    reader 3 type = phoenix
    reader 3 name = /dev/tts/1
    reader 3 parity = E
    reader 3 newcamd port = 10003
    reader 3 newcamd deskey = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    reader 3 detect mode = 0


    #remote servers

    net shares = 0
    #net share i = ip-or-domain:socketproto[usernamepassword:keyhex]
    # where 'proto' = 1 for v4 rdgd server, 0 for older rdgd server and 2 for nwecamd server
    #example 1 => radegast server connect:
    #net share 1 = 192.168.1.5:777:1:
    #example 2 => newcamd server connect:
    #net share 2 = hack.somwhere.net:12345:2:user1pass2:01 02 03 04 05 06 07 08 09 10 11 12 13 14
    net timeout = 5000
    # * Timeout for network I/O operations when rdgd
    # acts as client

    user database = /var/etc/radegast.users

    plugin directory = /var/bin
    plugins = con-webmin

    webmin port = 8888

    # ---------------------------------------
    # Client configuration (for rdgc or camd)
    # ---------------------------------------
    [camd]
    #pmt = own|file|socket
    pmt = file
    #debug = 0

    # PMT table magic
    #ecm caid remove = caidprovid
    # * Filter specified ECM stream off. Usefull when simulcrypt
    # is used and is known that some of the ECM stream is unsupported
    # (ie. when new cards are testing but not already at customers)
    ecm caid remove = 0D22:000004
    #ecm caid remap = caidprovidpid-oldpid-new
    # * Remap ECM pid for some service. Usable
    # - when provider sends fake ECM PID entry
    # - when provider uses the same DW for more services
    #ecm caid priority = ciadprovid (unimplemented)
    #ecm caid fixed dw = caidprovid:dw_16hex (unimplemented)

    dvb api = 3
    # * DVB API version: 2 or 3
    # (IBM API is faked as '3')
    descr mode = v3api
    # * Descrambler feeding method: off, v2api, file, v3api

    demux index = 1
    # * index = 1 for working timeshifting/recording
    # on dreambox.

    #ecm flood lock = 5
    #ecm flood release = 200


    Editieren nur mit einem Linux conformen Editor zum Beispiel Crimson Editor

    nun noch die radegast.users dreambox

    #
    # User Database for Radegast suite
    #
    # Format:
    #
    # usernamepassword:authlevelproto:cardmask:multi:hos t
    #
    # authlevel = 0(ecm only), 1(ecm+emm), 2(cdircon only) [default = 0]
    # proto = 1(rdgd), 2(newcamd) or summ [default = all]
    # cardmask = max 32bit hex value mask to selectivelly enable reader for user [default = all]
    # multi = 0(unrestricted) or any positive value for restricted simultanous login [default = 0]
    # host = ip or hostname
    #
    # Note: Only 2 first items are required, rest are optional
    #
    # Achtung : die ersten beiden Eintäge nicht ändern
    #
    hackerpass1:1
    newbiepass2:0
    *:+:0:3:-1:1:127.0.0.1
    luserpass:0:3
    dummy:dummy:1
    kathi:kathi:1
    kath1:kath1:1

    eurer user u. pass wort anpassen bez. hienzufügen

    ein cleint für die dreambox wäre zum beispiel Mgcamd

    hier die mgcam.cfg für dreambox

    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 00 }

    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }

    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 02 }

    # k** update (sum 01 or 02 with 04)
    # 01 update only new k**s, default setting
    # 02 update all k**s (used for valid PMK checking)
    # 04 enable TPS au
    U: { 04 }

    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }

    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 g**x netclient
    G: { 01 }

    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30

    # network ecm timeout in seconds
    K: { 05 }

    # newcamd dead routes connect retry, sec
    Q: { 600 }

    # network shares priority
    # 00 g**x, newcamd, radegast, camd3 (default)
    # 01 camd3, radegast, newcamd, g**x
    # 02 newcamd, camd3, g**x, radegast
    P: { 01 }

    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password

    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm k**s update
    # + web port to use for osd
    #S: { 03 } 80

    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    #L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log

    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }

    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }

    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 04 }

    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    #D: { 53 }

    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    B: { 02 }

    und der konnekt zum dreambox radegast server die newcamd.list

    CWS_KEEPALIVE = 300
    CWS_INCOMING_PORT = 21000
    #
    CWS = 127.0.0.1 10001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan
    CWS = 127.0.0.1 10002 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    so ist die funktions fähige server config für die dream_serverbox

    in der kathrein lediglich diese zeile einfügen in der radegast.cfg

    #remote servers
    net shares = 2
    #net share i = ip-or-domain:socketproto[usernamepassword:keyhex]
    #examples:
    #net share 1 = 192.168.1.5:777:rdgd:
    #net share 2 = hack.somwhere.net:12345:newcamd:user1pass2:01 02 03 04 05 06 07 08 09 10 11 12 13 14
    net share 1 = 192.168.1.xx:10001:2:kathi:kathi:01 02 03 04 05 06 07 08 09 10 11 12 13 14
    net share 2 = 192.168.1.xx:10002:2:kath1:kath1:01 02 03 04 05 06 07 08 09 10 11 12 13 14
    # 192.168.1.xx = natürlich eure ip zur dreambox
    net timeout = 500000
    # * Timeout for network I/O operations when quick answer is required

    mfg



    Exemplul l-am luat "as is" ...

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top