Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 16 EUR (16%)
Donate to support this site...

Results 1 to 3 of 3
  1. #1
    Senior Member Expert
    Join Date
    Nov 2004
    Posts Thanks / Likes

    Default new software for micro-x and astrovox

    new software released for micro-x mdr 6000 ir and astrovox 2600 plus, go to

  2. #2
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2004
    Posts Thanks / Likes

    Thumbs down mdr 2850

    mdr 2850 - tps not working with new software

  3. #3
    Moderator Expert
    Join Date
    Jan 2006
    Posts Thanks / Likes


    Quote Originally Posted by usufktk View Post
    mdr 2850 - tps not working with new software
    have you followed;
    Loading procedure for MDR-2850 FTA ultimate

    After downloading the file from the web site – use windows unzip to unzip the file and save the same on your hard drive.

    Go to the folder MDR-2850 FTA and you will find two files – one named Micro-x loader and the bin file containing the software – please follow the procedure in the as given in the following pictures.

    Select send if you want to loader the software to receiver.

    Select the open button to select the bin file from the folder in which you have save the unzipped files.

    Select the file and use the open

    Select the model as ci model and the correct COM port as required.

    Once the start button is pressed – please switch on the receiver either from the standby button on the front panel or by the power switch on the back panel. If correctly done above download bar will show along with the percentage of data loaded.

    A message showing that the download has been successful will show – indicating that the receiver has been successfully been downloaded.

    You now disconnect the power and connect to your receiver --- please note that the factory default for all software is set as off – please reset any password changes made by entering the codes as given in the manual



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Back to Top