Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 6 123 ... LastLast
Results 1 to 15 of 84
  1. #1
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default


    Quote Originally Posted by dvbkey View Post
    My server offer
    68.5E MultiChoice Africa Package
    76.5 E c-sky-net
    88E TBL
    108 E TelkomVision
    110.5 E CBTV
    122E skywave
    138E C band I-sky-net KU band D-sky-net
    146 E dream TV C-sky-net
    you can free test few days
    yearly fee $ 50 USD
    my e-mail:[email protected]
    TEL&SMS :008613778436591
    WOW...AS USUAL FROM CHINA....A REAL BARGAIN !
    HERE IN THAILAND THE DEALERS CHARGE A MINIMUM OF $240 PER YEAR ..AND NOT ALL THE PACKAGES ABOVE ARE INCLUDED. SOMETIMES ASTRO IS INCLUDED HOWEVER.
    [PS TO DVB KEY :YOUR OFFER IS SO GOOD I HAVE POSTED IT ON THE THAI SATELLITE WEBOARD SO PLEASE EXPECT MANY EMAILS/ORDERS FROM THAILAND . GOOD LUCK ! ]

  2. #2
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default Question to dvb key

    Quote Originally Posted by C-BAND View Post
    WOW...AS USUAL FROM CHINA....A REAL BARGAIN !
    HERE IN THAILAND THE DEALERS CHARGE A MINIMUM OF $240 PER YEAR ..AND NOT ALL THE PACKAGES ABOVE ARE INCLUDED. SOMETIMES ASTRO IS INCLUDED HOWEVER.
    question for dvb key :
    do you sell a cv12 for I-R-D-E-T-O..............if so what is the price if one buys both I know aleady you sell one for viacess
    Thank you

  3. #3
    Platinum member Expert
    Join Date
    Aug 2005
    Location
    21.95° N 97.06° E
    Posts
    6,263
    Posts Thanks / Likes

    Default

    Quote Originally Posted by dvbkey View Post
    My server offer
    68.5E MultiChoice Africa Package
    76.5 E c-sky-net
    88E TBL
    108 E TelkomVision
    110.5 E CBTV
    122E skywave
    138E C band I-sky-net KU band D-sky-net
    146 E dream TV C-sky-net
    you can free test few days
    yearly fee $ 50 USD
    my e-mail:[email protected]
    TEL&SMS :008613778436591
    Oh God ! very good packages for everybody who can get these satellites.I'm now contact u with the help of my thailand friend.Hope u can help me and him also.
    Thanks also to my friend.

    Thanks.
    " 李俊明 Born To Help People "

    DM 500s , Pacific 3600 CI , Humax F2 Finder , Angel Box , My Dream Machine , Tatasky , KAON , Topfield 3030 , Yuri YR1Dap , Dynasat 7100 , F1 , Plus and II , Metabox II , 10 , Viva Vs 9000 , SkyBox II , X-Sat 430 , 420 , Bolt N2 , NewB , New Shine Ns 3000 , Victory V 889 , F1 Newshine , New Star , Innovia 3088 CA , Atom 7000 , PBI , Prosat , Dstv 3Q76 , GA 88a , Tatasky , Big Tv , Airtel .



  4. #4
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default

    Quote Originally Posted by dvbkey View Post
    sorry CV12 is not for ****** . cv12 only for viaccess and conax
    I think you can buy a dreambox it only $ 130 USD (include 1 year cardsharing fee)
    THANK YOU FOR THE INFO. WHICH PROVES HOW HONEST YOU ARE
    SO I-R-D-E-T-O NO GOOD FOR CV12.
    MANY THANKS

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jun 2006
    Location
    Thailand
    Posts
    436
    Posts Thanks / Likes

    Default

    Quote Originally Posted by dvbkey View Post
    sorry CV12 is not for ****** . cv12 only for viaccess and conax
    I think you can buy a dreambox it only $ 130 USD (include 1 year cardsharing fee)
    Hi dvbkey,
    Can you confirm that u sell:
    dreambox $ 130 USD (include 1 year cardsharing fee)

    bye

  6. #6
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Posts
    4
    Posts Thanks / Likes

    Default

    Quote Originally Posted by dvbkey View Post
    My server offer
    68.5E MultiChoice Africa Package
    76.5 E c-sky-net
    88E TBL
    108 E TelkomVision
    110.5 E CBTV
    122E skywave
    138E C band I-sky-net KU band D-sky-net
    146 E dream TV C-sky-net
    you can free test few days
    yearly fee $ 50 USD
    my e-mail:[email protected]
    TEL&SMS :008613778436591
    can you pm me a cccam user and pass i want to try it first

  7. #7
    Banned
    RDI - Board Banned Avatar

    Join Date
    Apr 2003
    Posts
    28
    Posts Thanks / Likes

    Default

    Don`t pay for cardsharing . You don`t have any guarantee about the functionality of the server in the future . You pay 50$ and after 2 months , the server dissapear ....

    ATTENTION

  8. #8
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Location
    Singapore
    Posts
    14
    Posts Thanks / Likes

    Default

    Quote Originally Posted by dvbkey View Post
    this is some test account in my server
    cccam
    C: tel.cardshare.cn 19808 user password yes

    user password
    gx-fvc42sf bvipg02sab
    gx-lka43cx bvipv03xzu
    gx-cdf32hy vdwqx02meg
    cant get any of these to work ?

  9. #9
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default

    Quote Originally Posted by ********* View Post
    Don`t pay for cardsharing . You don`t have any guarantee about the functionality of the server in the future . You pay 50$ and after 2 months , the server dissapear ....

    ATTENTION
    Many thanks for the warning but we hopefully are all intelligent adults and understand the risks. However even if the subs only last two months we would have been able to see bouquets normally closed to us and enjoyed viewing which would have cost more than $25 for a month on just one bouquet ...here we get TEN BOUQUETS !
    I honestly think its a good bet at the quoted price but thanks for giving the warning of the dangers .

  10. #10
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Location
    Singapore
    Posts
    14
    Posts Thanks / Likes

    Default

    Quote Originally Posted by dvbkey View Post
    Yes it's work
    this is what is in my cccam.cfg file

    # CCcam team uvadi CCcam v1.6.0
    #
    # Special greets go to Dale Cooper, the RuDream and ofcourse HDLteam
    #
    # For system without new enigma socket.... capmtserver is your friend
    #
    ################################################## ####################
    # friends #
    ################################################## ####################
    # syntax for to add a friend user to CCcam with the max up hops limit
    # sharing of emus (default = 1), allow emm (default = 1), and optional
    # downshare limits per share (default = no limits) and optional
    # downshare limits per share based on caid:id:sid
    # emus are shared only one level down, even if no limits given
    #
    # max username length 20
    # password length 'unlimited'
    #
    #F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } )
    #
    # example:
    #
    # F: user1 pass1 10
    #
    # user1 gets all our shares at max 10 hops from us
    # (our local cards + max ten hops away). He can share down to his own
    # clients. He also receive emu shares (if he has 'yes' behind his C: entry),
    # and is allowed to send us emm.
    #
    # F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
    #
    # user2 gets only our local cards but no 0100:000080.
    # and our 0622:000000 cards only for himself (1 hop down),
    # and 0500 cards for himself plus one additional hop down.
    # He also gets our emus, and is NOT allowed to send us emm (updates).
    #
    # F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
    #
    # user3 gets all cards at a maximum of 5 hops away from us,
    # and get's to share them down two further levels beyond his own level.
    # But he is not allowed to share 0100:000080 down to other users.
    # He gets no emus from us, and he is allowed to send us emm.
    #
    # F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
    #
    # user4 gets all cards at a maximum of 5 hops away from us,
    # and get's to share them down two further levels beyond his own level.
    # But he is not allowed to share 0100:000080 down to other users.
    # He gets no emus from us, and he is allowed to send us emm.
    # He is also not allowed to view channel 0100:000080:15df

    ################################################## ####################
    # connections #
    ################################################## ####################
    # syntax for to add a client connection to other CCcam
    # add yes on end to use friends emus (non public private key/emu,etc...),
    # but only works when corresponding F line on server has '1' for <shareemus>
    # optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)
    #
    #C: <hostname> <port> <username> <password> <wantemus> ( { caid:id(:uphops), caid:id(:uphops), ... } )
    #
    # example:
    #
    # C: tel.cardshare.cn 19808 gx-fvc42sf bvipg02sab yes
    # C: tel.cardshare.cn 19808 gx-lka43cx bvipv03xzu yes
    # C: tel.cardshare.cn 19808 gx-cdf32hy vdwqx02meg yes
    # connects to CCcam, and receives friends emus also.

    # syntax for to add newcamd server connection
    #
    #N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
    #
    # example:
    #
    # N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    #
    # add a newcamd card, give it an offset of 2 hops, in the share list
    #
    # N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
    #
    # stealthy login on newcamd server:
    #
    # N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
    #
    # stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic

    # syntax for to add radegast server connection
    #
    #R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
    #
    # example:
    #
    # R: 127.0.0.1 678 0100 000080

    # syntax for to add camd3 connection
    #
    #L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
    #
    # example:
    #
    # L: 127.0.0.1 567 dummy dummy 0100 000080

    ################################################## ####################
    # Other config settings #
    ################################################## ####################
    # server shall listen on this port pro incoming connections
    # default port is 12000, disable server with parm -s or set port 0
    #
    #SERVER LISTEN PORT : 12000
    # server can give some info about server and client connections
    # and cardinfo using telnet or webbrowser.
    #
    # Switch on/off access to info
    # default is yes
    #
    #ALLOW TELNETINFO: no
    #ALLOW WEBINFO: no
    # The webinfo service can be protected with a username and password.
    # This is switched off by default
    #
    #WEBINFO USERNAME : <username>
    #WEBINFO PASSWORD : <password>
    # The telnetinfo service can be protected with a username and password.
    # This is switched off by default
    #
    #TELNETINFO USERNAME : <username>
    #TELNETINFO PASSWORD : <password>
    # default port for telnet is 16000
    # default port for web is 16001
    # supported commands:
    # info
    # activeclients
    # clients
    # servers
    # shares
    # providers
    # entitlements
    # example use:
    # echo servers | telnet localhost 16000
    # go with your browser to http://ip_CCcam_server:16001
    #
    #TELNETINFO LISTEN PORT : 16000
    #WEBINFO LISTEN PORT : 16001
    # time in seconds to keep On Screen Display active.
    # default is 0 (turned off)
    #
    #ZAP OSD TIME : 3
    # username used to show popup (default : root)
    #OSD USERNAME : root
    # password used to show popup (default : dreambox)
    #OSD PASSWORD : dreambox
    # port used to show popup (default : 80)
    #OSD PORT : 80
    # Serial path to phoenix reader. Add as many as you have attached too your system
    # default is none
    # optionally add readertype : phoenix,mouse,uniprog
    # (when non readertype given defaults to uniprog (e.g. for mastera))
    #
    # Phoenix Reader Path : <device> <type>
    #
    # example
    #
    #PHOENIX READER PATH : /dev/tts/0

    # if timing should be shown in OSD and debug output
    # default is no (turned off)
    #
    #SHOW TIMING : yes
    # enables mini OSD which shows server(type), cardreader, keys or fta only
    # default is no (turned off)
    #
    #MINI OSD : yes
    # turns debugging on and off
    # default is no (turned off)
    #
    #DEBUG : yes

    # should CCcam try to read and parse newcamd.conf for server connections
    # default is no (turned off)
    #
    #NEWCAMD CONF : yes

    # configure what EMM blocker you want. Add as many as readers you have attached
    # default is blocking nothing
    #
    # B: /dev/sci0 01
    # 00 - nothing
    # 01 - sa blocked
    # 02 - ua blocked
    # 04 - ga blocked
    # and sum of for combinations
    #
    #examples
    #
    #B: /dev/tts/0 07
    #B: /dev/sci0 01
    # disable all local EMM readers
    # saves lots of CPU, but you won't get any updates anymore
    # (unless you get updates from your clients)
    #
    # default: no
    #
    #DISABLE EMM : yes
    # with this setting you can
    # allow a client on two hops away
    # to send the updates to the cardserver
    #
    # default : no
    #
    #EXTRA EMM LEVEL : yes
    # overrule the nds boxkey (4 byte hex)
    #
    # BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
    #
    #example
    #
    #BOXKEY: /dev/sci0 00 11 22 33
    # set card pin
    # * please be very careful with this option as you could lock your card *
    #
    # PIN: <device> <pin>
    #
    #example
    #
    #PIN: /dev/sci0 9999
    # overrule the ****** camkey (8 byte hex), default 11 22 33 44 55 66 77 88
    #
    # CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>
    #
    #example
    #
    #CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88
    # overrule the ****** camdata (64 byte hex)
    # trailing zero bytes can be omitted
    # default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults
    #
    # CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>
    #
    #example, when only the first 15 camdata bytes are nonzero
    #
    #CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
    # custom add id's for BEEF patched cards
    #
    # BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>
    #
    #example
    #
    #BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0
    # what Softcam.Key should CCcam try to read
    # defaults to /var/keys/SoftCam.Key
    #
    #SOFTKEY FILE : /var/keys/SoftCam.Key

    # what AutoRoll.Key should CCcam try to read
    # defaults to /var/keys/AutoRoll.Key
    #
    #AUTOROLL FILE : /var/keys/AutoRoll.Key

    # what constant.cw should CCcam try to read
    # defaults to /var/keys/constant.cw
    # file content can be like
    #
    # ca4:id6:sid4mtpid4:ecmpid4:key16(01 02 03...)
    #
    #STATIC CW FILE : /var/keys/constant.cw

    # in this file you can configure what CAIDs CCcam should prefer or ignore
    # defaults to /var/etc/CCcam.prio
    # file content can have ignores (I) and prio lists (P)
    #
    # situation 1: ignore allways this caid, all idents, on all channels
    # I: caid
    #
    # situation 2: ignore allways this caid/ident pair
    # I: caid:ident
    #
    # situation 3: ignore this caid/ident pair, on channel 'sid'
    # I: caid:ident:sid
    #
    # situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
    # P: caid1, caid2
    #
    # situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
    # P: caid1:ident1, caid2:ident2, .., caidN:identN
    #
    # situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
    # Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
    # P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
    #
    #CAID PRIO FILE : /var/etc/CCcam.prio

    # write wrong logins to file
    # defaults is off
    #
    #LOG WARNINGS : /tmp/warnings.txt
    # global setting for stealthy login to newcamd/newcs server, N line can overrule
    # stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
    # default: 0
    #
    #NEWCAMD STEALTH : 0
    # load balancing between identical cards, list device names of card readers containing identical cards,
    # optionally followed by a list of service id's which are to be excluded from loadbalancing
    #
    # LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
    #
    # multiple loadbalance groups can be configured, by adding multiple lines
    # warning: restart is required, when loadbalance group config changes
    #
    #example 1: load balance requests for three identical cards
    #
    # LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
    #
    #example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
    #on one of the cards, so requests for these sids shouldn't be loadbalanced
    #
    # LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }
    # in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
    # in version 1.4.0 network load was significantly reduced
    # in order to take advantage of these fixes, all clients should upgrade
    # with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
    #
    # default : accept all versions
    #
    #example 1: avoid disconnecting clients problem
    #
    #MINIMUM CLIENT VERSION : 1.3.0
    #
    #example 2: achieve network load decrease
    #
    #MINIMUM CLIENT VERSION : 1.4.0

    and in location VAR / ETC

    What am i doing wrong ?

    I try CCcam-Capmtserver and CCcam-171/Newcs120

    I start restart cam NOTHING ?

  11. #11
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Mar 2003
    Location
    98.98 East 18.56 north
    Posts
    1,201
    Posts Thanks / Likes

    Default

    Quote Originally Posted by james255 View Post
    this is what is in my cccam.cfg file

    # CCcam team uvadi CCcam v1.6.0
    #
    # Special greets go to Dale Cooper, the RuDream and ofcourse HDLteam
    #
    # For system without new enigma socket.... capmtserver is your friend
    #
    ################################################## ####################
    # friends #
    ################################################## ####################
    # syntax for to add a friend user to CCcam with the max up hops limit
    # sharing of emus (default = 1), allow emm (default = 1), and optional
    # downshare limits per share (default = no limits) and optional
    # downshare limits per share based on caid:id:sid
    # emus are shared only one level down, even if no limits given
    #
    # max username length 20
    # password length 'unlimited'
    #
    #F: <username> <password> <uphops> <shareemus> <allowemm> ( { caid:id(:downhops), caid:id(:downhops), ... } { caid:id:sid, caid:id:sid, ... } )
    #
    # example:
    #
    # F: user1 pass1 10
    #
    # user1 gets all our shares at max 10 hops from us
    # (our local cards + max ten hops away). He can share down to his own
    # clients. He also receive emu shares (if he has 'yes' behind his C: entry),
    # and is allowed to send us emm.
    #
    # F: user2 pass2 0 1 0 { 0100:000080, 0622:000000:1, 0500:000000:2 }
    #
    # user2 gets only our local cards but no 0100:000080.
    # and our 0622:000000 cards only for himself (1 hop down),
    # and 0500 cards for himself plus one additional hop down.
    # He also gets our emus, and is NOT allowed to send us emm (updates).
    #
    # F: user3 pass3 5 0 1 { 0:0:3, 0100:000080:1 }
    #
    # user3 gets all cards at a maximum of 5 hops away from us,
    # and get's to share them down two further levels beyond his own level.
    # But he is not allowed to share 0100:000080 down to other users.
    # He gets no emus from us, and he is allowed to send us emm.
    #
    # F: user4 pass4 5 0 1 { 0:0:3, 0100:000080:1 } { 0100:000080:15df }
    #
    # user4 gets all cards at a maximum of 5 hops away from us,
    # and get's to share them down two further levels beyond his own level.
    # But he is not allowed to share 0100:000080 down to other users.
    # He gets no emus from us, and he is allowed to send us emm.
    # He is also not allowed to view channel 0100:000080:15df

    ################################################## ####################
    # connections #
    ################################################## ####################
    # syntax for to add a client connection to other CCcam
    # add yes on end to use friends emus (non public private key/emu,etc...),
    # but only works when corresponding F line on server has '1' for <shareemus>
    # optional limits just like F line, but for incoming shares (ignore shares more than 'uphops' away)
    #
    #C: <hostname> <port> <username> <password> <wantemus> ( { caid:id(:uphops), caid:id(:uphops), ... } )
    #
    # example:
    #
    # C: tel.cardshare.cn 19808 gx-fvc42sf bvipg02sab yes
    # C: tel.cardshare.cn 19808 gx-lka43cx bvipv03xzu yes
    # C: tel.cardshare.cn 19808 gx-cdf32hy vdwqx02meg yes
    # connects to CCcam, and receives friends emus also.

    # syntax for to add newcamd server connection
    #
    #N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
    #
    # example:
    #
    # N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    #
    # add a newcamd card, give it an offset of 2 hops, in the share list
    #
    # N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2
    #
    # stealthy login on newcamd server:
    #
    # N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1 1
    #
    # stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic

    # syntax for to add radegast server connection
    #
    #R: <ip> <port> <ca4> <id6> <nr_of_hops_away (default: 1)>
    #
    # example:
    #
    # R: 127.0.0.1 678 0100 000080

    # syntax for to add camd3 connection
    #
    #L: <ip> <port> <username> <pass> <ca4> <id6> <nr_of_hops_away (default: 1)>
    #
    # example:
    #
    # L: 127.0.0.1 567 dummy dummy 0100 000080

    ################################################## ####################
    # Other config settings #
    ################################################## ####################
    # server shall listen on this port pro incoming connections
    # default port is 12000, disable server with parm -s or set port 0
    #
    #SERVER LISTEN PORT : 12000
    # server can give some info about server and client connections
    # and cardinfo using telnet or webbrowser.
    #
    # Switch on/off access to info
    # default is yes
    #
    #ALLOW TELNETINFO: no
    #ALLOW WEBINFO: no
    # The webinfo service can be protected with a username and password.
    # This is switched off by default
    #
    #WEBINFO USERNAME : <username>
    #WEBINFO PASSWORD : <password>
    # The telnetinfo service can be protected with a username and password.
    # This is switched off by default
    #
    #TELNETINFO USERNAME : <username>
    #TELNETINFO PASSWORD : <password>
    # default port for telnet is 16000
    # default port for web is 16001
    # supported commands:
    # info
    # activeclients
    # clients
    # servers
    # shares
    # providers
    # entitlements
    # example use:
    # echo servers | telnet localhost 16000
    # go with your browser to http://ip_CCcam_server:16001
    #
    #TELNETINFO LISTEN PORT : 16000
    #WEBINFO LISTEN PORT : 16001
    # time in seconds to keep On Screen Display active.
    # default is 0 (turned off)
    #
    #ZAP OSD TIME : 3
    # username used to show popup (default : root)
    #OSD USERNAME : root
    # password used to show popup (default : dreambox)
    #OSD PASSWORD : dreambox
    # port used to show popup (default : 80)
    #OSD PORT : 80
    # Serial path to phoenix reader. Add as many as you have attached too your system
    # default is none
    # optionally add readertype : phoenix,mouse,uniprog
    # (when non readertype given defaults to uniprog (e.g. for mastera))
    #
    # Phoenix Reader Path : <device> <type>
    #
    # example
    #
    #PHOENIX READER PATH : /dev/tts/0

    # if timing should be shown in OSD and debug output
    # default is no (turned off)
    #
    #SHOW TIMING : yes
    # enables mini OSD which shows server(type), cardreader, keys or fta only
    # default is no (turned off)
    #
    #MINI OSD : yes
    # turns debugging on and off
    # default is no (turned off)
    #
    #DEBUG : yes

    # should CCcam try to read and parse newcamd.conf for server connections
    # default is no (turned off)
    #
    #NEWCAMD CONF : yes

    # configure what EMM blocker you want. Add as many as readers you have attached
    # default is blocking nothing
    #
    # B: /dev/sci0 01
    # 00 - nothing
    # 01 - sa blocked
    # 02 - ua blocked
    # 04 - ga blocked
    # and sum of for combinations
    #
    #examples
    #
    #B: /dev/tts/0 07
    #B: /dev/sci0 01
    # disable all local EMM readers
    # saves lots of CPU, but you won't get any updates anymore
    # (unless you get updates from your clients)
    #
    # default: no
    #
    #DISABLE EMM : yes
    # with this setting you can
    # allow a client on two hops away
    # to send the updates to the cardserver
    #
    # default : no
    #
    #EXTRA EMM LEVEL : yes
    # overrule the nds boxkey (4 byte hex)
    #
    # BOXKEY: <device> <byte1> <byte2> <byte3> <byte4>
    #
    #example
    #
    #BOXKEY: /dev/sci0 00 11 22 33
    # set card pin
    # * please be very careful with this option as you could lock your card *
    #
    # PIN: <device> <pin>
    #
    #example
    #
    #PIN: /dev/sci0 9999
    # overrule the ****** camkey (8 byte hex), default 11 22 33 44 55 66 77 88
    #
    # CAMKEY: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> <byte7> <byte8>
    #
    #example
    #
    #CAMKEY: /dev/sci0 11 22 33 44 55 66 77 88
    # overrule the ****** camdata (64 byte hex)
    # trailing zero bytes can be omitted
    # default for unknown ASC's is 11 22 33 44 55 66 77 88 00 00 .. 00, known ASC's have other defaults
    #
    # CAMDATA: <device> <byte1> <byte2> <byte3> <byte4> <byte5> <byte6> ... <byte64>
    #
    #example, when only the first 15 camdata bytes are nonzero
    #
    #CAMDATA: /dev/sci0 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
    # custom add id's for BEEF patched cards
    #
    # BEEF ID: <ident1> <ident2> <ident3> <ident4> <ident5> <ident6> <ident7> <ident8> <device>
    #
    #example
    #
    #BEEF ID: 4101 0 0 0 0 0 0 0 /dev/sci0
    # what Softcam.Key should CCcam try to read
    # defaults to /var/keys/SoftCam.Key
    #
    #SOFTKEY FILE : /var/keys/SoftCam.Key

    # what AutoRoll.Key should CCcam try to read
    # defaults to /var/keys/AutoRoll.Key
    #
    #AUTOROLL FILE : /var/keys/AutoRoll.Key

    # what constant.cw should CCcam try to read
    # defaults to /var/keys/constant.cw
    # file content can be like
    #
    # ca4:id6:sid4mtpid4:ecmpid4:key16(01 02 03...)
    #
    #STATIC CW FILE : /var/keys/constant.cw

    # in this file you can configure what CAIDs CCcam should prefer or ignore
    # defaults to /var/etc/CCcam.prio
    # file content can have ignores (I) and prio lists (P)
    #
    # situation 1: ignore allways this caid, all idents, on all channels
    # I: caid
    #
    # situation 2: ignore allways this caid/ident pair
    # I: caid:ident
    #
    # situation 3: ignore this caid/ident pair, on channel 'sid'
    # I: caid:ident:sid
    #
    # situation 4: when both caid1 and caid2 exist for a channel, prefer caid1 over caid2
    # P: caid1, caid2
    #
    # situation 5: when caid1:ident1 till caidN:identN exist for a channel, use them in order of this list.
    # P: caid1:ident1, caid2:ident2, .., caidN:identN
    #
    # situation 6: when caid1:ident1 till caidN:identN exist for channel 'sid', use them in order of this list.
    # Sid on first caid/ident pair identifies sid for which list is used. All other sids ignore this list.
    # P: caid1:ident1:sid, caid2:ident2, .., caidN:identN
    #
    #CAID PRIO FILE : /var/etc/CCcam.prio

    # write wrong logins to file
    # defaults is off
    #
    #LOG WARNINGS : /tmp/warnings.txt
    # global setting for stealthy login to newcamd/newcs server, N line can overrule
    # stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
    # default: 0
    #
    #NEWCAMD STEALTH : 0
    # load balancing between identical cards, list device names of card readers containing identical cards,
    # optionally followed by a list of service id's which are to be excluded from loadbalancing
    #
    # LOADBALANCE : <device1> <device2> .. <devicen> { <exceptsid1>, <exceptsid2> .. , <exceptsidn> }
    #
    # multiple loadbalance groups can be configured, by adding multiple lines
    # warning: restart is required, when loadbalance group config changes
    #
    #example 1: load balance requests for three identical cards
    #
    # LOADBALANCE : /dev/ttyS0 /dev/ttyS1 /dev/ttyS2
    #
    #example 2: load balance requests for two almost identical cards, sid 0df3 and 0de1 are only available
    #on one of the cards, so requests for these sids shouldn't be loadbalanced
    #
    # LOADBALANCE : /dev/ttyS5 /dev/ttyS6 { 0df3,0de1 }
    # in version 1.2.1 and lower there was a problem which could lead to disconnecting clients
    # in version 1.4.0 network load was significantly reduced
    # in order to take advantage of these fixes, all clients should upgrade
    # with this setting you can force that clients at least use a certain version otherwise they are denied when logging in
    #
    # default : accept all versions
    #
    #example 1: avoid disconnecting clients problem
    #
    #MINIMUM CLIENT VERSION : 1.3.0
    #
    #example 2: achieve network load decrease
    #
    #MINIMUM CLIENT VERSION : 1.4.0

    and in location VAR / ETC

    What am i doing wrong ?

    I try CCcam-Capmtserver and CCcam-171/Newcs120

    I start restart cam NOTHING ?

    first check your C Line
    C: xxxxxxxxxx 19808 gx-fvc42sf bvipg02sab yes
    C: xxxxxxxxxx 19808 gx-lka43cx bvipv03xzu yes
    C: xxxxxxxxxx 19808 gx-cdf32hy vdwqx02meg yes
    write it without this (#)
    and Second dont Post it more this line
    Daeng

    10FT Dish 169° east-49°east

  12. #12
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Mar 2003
    Location
    98.98 East 18.56 north
    Posts
    1,201
    Posts Thanks / Likes

    Default

    Quote Originally Posted by C-BAND View Post
    question for dvb key :
    do you sell a cv12 for I-R-D-E-T-O..............if so what is the price if one buys both I know aleady you sell one for viacess
    Thank you
    i have one CV 12 Box for ****** but without Server
    you want it PM me

    [email protected]
    Daeng

    10FT Dish 169° east-49°east

  13. #13
    Member Mentor
    Join Date
    Jul 2006
    Location
    thailand
    Posts
    592
    Posts Thanks / Likes

    Default

    can anyone get this to work i can not

  14. #14
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Apr 2004
    Location
    west australia
    Posts
    51
    Posts Thanks / Likes

    Default nothing

    no nothing down here as well

  15. #15
    Member Mentor
    Join Date
    Jul 2006
    Location
    thailand
    Posts
    592
    Posts Thanks / Likes

    Default


    i smell a rat i will stick with the server i have now works 100%

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top