Deja a aparut o noua imagine ptr. dbox2 cu suport IDE si xfs ptr. HDD. E drept varianta beta numai pentru Nokia si Sagem dar cu multe chestii foarte interesante si utile. Merita testata.

************************************************** ********************
FOR PUBLIC TESTS! NOW WITH SAGEM/ENX SUPPORTING TOO.
DID NOT TESTING ON CABLE-BOX.
************************************************** ********************
Welcome to Neutrino.DREAM Plus!

Neutrino.DREAM Plus v2.03beta3/16bit-colorset
************************************************** ********************
**Audioplayer**Movieplayer**PictureViewer**TS MovieBrowser**Yweb**
**Live-veiw by web**Auto-record per channels zap**
**Muiti-EPG: D+/Sky Italia/Cyfra+**EPG cash**TuxBox Commander**
**Support gotoXX/USALS commands for DisEqC 1.2 motors**
**Bouquet editor**Virtual Zap**Zapit options menu**
**Manual scan per frequency**Acoustics spectrum lcd-analyzer**
**Fade menu changes**
Lockales: deutsch, dutch, english, french, hungarian, italiano,
lithuanian, polski, portugues, russkij.

With most of Astra/HotBird/NTVplus channel-logos inside, but w/out xfs supports.
file: dbox_n16plus_squashfsjffs2_2x.img
md5sum: AAFD8C1C22836CE73DAEE9548F89DE6C
file: dbox_n16plus_squashfsjffs2_1x.img
md5sum: CFB621FACDEA87A892E15F8275143E23

With xfs supports, but w/out channel-logos inside (Astra-logos inside).
file: dbox_n16plus_squashfsjffs2_2x_xfs.img
md5sum: 729AE99D0EE99991C3AD37B0CC4825D5
file: dbox_n16plus_squashfsjffs2_1x_xfs.img
md5sum: A50CF52C6D809AFCEB335FF436692D7A

Kernel 2.4.34-dbox2/SQUASHFS 3.0/CVS 03032007

version=1203200703092224
comment=ruDbox2 dbox2 image
creator=ruDbox team
credits=mixvt

Original bootlogo by •Dream•Box•Busters•/ http://www.dreambox.co.yu


************************************************** ********************
Question: How to switch off RC-click beep?
ANSWER: Main Menu/Settings/Key Setup/Key click =on/off
************************************************** ********************


There is 2.03beta3-version of Neutrino.DREAM/16bit-colorset for dbox2.
************************************************** ********************
WE HAD NOT TIME TO GOOD TESTING. WE HAD NOKIA DBOX2/SAT ON TESTING.
SO WE CAN'T TO SAY IS IT BEST OR NOT FOR YOURS USING!
PLEASE, REMEMBER - IT'S A BETA VERSION FOR PUBLIC TEST!
************************************************** ********************
WE'RE USING Neutrino.DREAM AS BASE IMAGE ON DBOX2!
FLASHING IS SAME AS ALL.
************************************************** ********************
OUR Neutrino.DREAM Plus USING SPECIAL NEW CHANNELS-FORMAT SETTINGS.
YOU MAY TO EDIT CHANNELS-SETTINGS WITH DreamSet-EDITOR.
DreamSet - http://mmedit9800.tripod.com.
Special thank to John Vossos for great support nplus-format!
************************************************** ********************
WHERE ARE YOU CAN DOWNLOAD OFFICIAL(rudbox team) Neutrino.DREAM IMG:
http://www.ump2002.net(Pilot-Alex),
http://rudbox.da.ru, http://blackbox.my1.ru
************************************************** ********************

QuickNew.
-----------
1. Yweb v2.5.0
http://www.yjogol.de
2. Time-Syncronisation
Main Menu, Settings, Network Settings, Syncronisation via - off/on
3. EPG search incl. Lower Case/Upper Case
Event-List/[red], [red]Evetlist current programm, [green]Search
4. Coloured Keys(buttons) can be configured
Main Menu, Settings, Key Setup, User menu: user menu for red/green/yellow/blue buttons
5. Set preferred EPG language
http://www.hyper.fi/dbox2/sectionsd/
7. Auto-record
Main Menu, Settings, Recording, direct recording settings, Auto-record - off/on
8. Reboot added to main menu
9. Fix Fade ON! Real fade menu changes.
Main Menu, Settings, Colors/themes/font, Fade menus - off/on
10. added IDE supports ofcouse
Main Menu, Settings, HDD Settings: sleep tme/noise/filesystem/format/check
Filesystem - Ext3fs/Xfs
Attention! There is we do to public two images -
with xfs (dbox_n16plus_squashfsjffs2_xx_xfs.img)
and without xfs (dbox_n16plus_squashfsjffs2_2x_.img).
Both support IDE. But only one SUPPORTS XFS for hdd.

QuickStart.
-----------
1. Language Setup, Make your choice and press [back] to exit
2. Main Menu, Settings, Network Settings, Make your choice and press [red] to setup network now
3. Main Menu, Settings, Misc settings, Timezone, Make your choice
4. Main Menu, Settings, press [red] to save settings now
5. Main Menu, Services, Zapit options, set necessary values and parameters, press [red] to save settings
("Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!
"Tune timeout"-parameter is recommended to put value 25 for fist time/playing with it later.)
6. Main Menu, Services, Servicescan, set necessary values and parameters, Scan mode: Fast/Full!,
press [red] to save settings, start scan
7. Main Menu, Services, Video Settings, Video system: PAL/PAL-M/NTSC
8. Main Menu, Services, Audio Settings, English: off/on
(auto-switch on english-soundtrack if the "English"-name is present on the channels)

************************************************** ********************
Question: How to activate hdd?
************************************************** ********************
1. Main Menu, Settings, HDD Settings, Filesystem - Ext3fs/Xfs
2 Main Menu, Settings, HDD Settings, Activate settings
2. Main Menu, Settings, HDD Settings, Check filesystem
************************************************** ********************
Question: How to format hdd?
************************************************** ********************
1. Main Menu, Settings, HDD Settings, Filesystem - Ext3fs/Xfs
2. Main Menu, Settings, HDD Settings, Format HDD

Record settings.
-----------
1. Main Menu, Settings, Recording Settings, recording device: direct(file)/off/server
(set to "direct(file)" and set direct recording settings [green], [red] to activate changes)
************************************************** ********************
Question: Can I to switch on record one channel and continue to watch others?
************************************************** ********************
1. No problem.
2. Just do it.
3. You can to record one channel and watching any other from same transporder.
4. For crypt-channels we do it under using mgcamd.
Main Menu, Addons, Emu Type, Camd: no/mgcamd/newcamd/camd3/scam.
************************************************** ********************
Question: How to switch on auto-record mode?
************************************************** ********************
ANSWER: Main Menu/Settings/Recording/direct recording settings/Auto-record.
Set entry more than zero. 1 or 2 or 5... or 300. For dbox2 w/hdd support - 5-10.
Now at each zap channel record automatically will begin.
Auto-records(files) of the previous channels will automatically delete at each zap channels.
Auto-record mode is a special mode of recording, but it can be switched on original record-mode.
Features menu/Move timeshift to records.

Scripts.
-----------
Main Menu, Scripts
1. Backup your settings - store your personal neutrino settings to
addon files, so next time just upload addon_restore.bin for installing all settings.
2. Load MHW epg - Muitiepg loader D+/Sky Italia/Cyfra+
Before You make a start, see /var/bin/realgetepg.sh and editing it for your choice.
Zapit to one of:
NOT TESTED! Canal+/CanalSatellite France : Astra 19.2E / 12363 V / 27500
NOT TESTED! Canal Digitaal : Astra 19.2E / 12515 H / 22000
WORKING! Digital+ : Astra 19.2E / 10847 V / 22000
WORKING! Sky Italia : Hot Bird 13E / 12418 V / 27500
WORKING! Cyfra+ : Hot Bird 13E / 10719 V / 27500
NOT WORKING! TPS : Hot Bird 13E / 10892 V / 27500
3. Reset EPG
4. NOTIMEUPDATE
On different channels there is not an exact times. If there is a file /var/tuxbox/.notimeupdate
and the difference of more than 10 minutes, current time does not update.
5. Readme 1st/Image info

Default Keys(buttons)
-----------
1. [d-box] - Main Menu
2. [blue] - Features
3. [?] - channel info
4. [?][?] - channel EPG
5. [?][?][?] - channel EPG bigest font size
6. [?][?][?][?] - channel EPG normal font size
7. [green] - Select language
8. [red] - EPG Programm Information
9. [d-box][red] at tv-mode - open clock on topleft, second press - close clock
10. [d-box][green] at radio-mode - open clock on topleft, second press - close clock
11. [ok] - open channels-list
12. [ok][mute] - switch on dbv2000/channel-list mode (zap channels per move up/down on list)
13. [Home] - zapping history
14. [mute] - del files and records

Buttons fast rewind of record.
-----------
<1> - On 1 minute ago
<4> - On 5 minutes ago
<7> - On 10 minutes ago
<3> - For 1 minute forward
<6> - For 5 minutes forward
<9> - For 10 minutes forward
<2> - In the beginning of record
<5> - In the middle of record
<8> - In the end of record

MoviePlayer special button.
-----------
[OK] - channels-list output, so you can to see film-record and to read epg-info
if it not working try to setup new key for "Play"
it must be any botton but not OK-button

Channels logo.
-----------
Picture types - JPG and GIF.
The recommended size - 52 x 39 points.
The storage directory of files -/var/share/icons/logo/.
File with a logo the name from values of three parameters is given.

/ts id/on id/s id/.gif

TS id = "042a" on = "0001" frq = "11739000" inv = "2" sr = "27500000" fec = "3" pol = "1"
S i = "6ff8" n = " MTV Hits. [19E] " v = "be1" a = "be2" p = "be1" pmt = "151" tx = "0" t = "1"/

Accordingly the file for the channel " MTV Hits. [19E] " should have the following name.

42a00016fee.gif

EPG Cash.
-----------
Settings->Misc settings->-------Epg settings-------
Be carefull with "Dir for epg cash"!
There is must be freespace on hdd or your mount-partion/directory named as /hdd/, /mnt/, /media/, /tmp/.
Example: /hdd/epg, /mnt/your_dir/epg, /media/your_dir .

Acoustics spectrum lcd-analyzer
-----------
For audioplayer play-mode.
Main-menu->settings->audioplayer->lcd a-spectrum - no/yes

Live-veiw from dreambox-web.
-----------
Before to start Live-veiw from dbox-web:
install VLC http://downloads.videolan.org/pub/vi....8.x-win32.exe

Default cardserver and emu.
-----------
Newcs is default cardserver, mgcamd - emu.
************************************************** ********************
Question: How to activate mgcamd and newcs?
ANSWER: Cardserver newcs mustbe to activate/restart at first!
ANSWER: Main Menu/Addons/Cardserver: no->newcs /Restart cardsever
ANSWER: Main Menu/Addons/Camd: no->mgcamd /Restart camd
************************************************** ********************
Question: How to install camd3 or @box?
ANSWER: camd3 mustbe to added /var/emu as - camd3, pcamd to /var/bin as pcamd, othere files to /var/keys
ANSWER: @box mustbe to added /var/emu as - @box or camdd, othere files to /var/keys
Question: How to activate camd3 or @box?
ANSWER: Cardserver newcs mustbe deactivate at first!
ANSWER: Main Menu/Addons/Cardserver: newcs->no /Restart cardsever
ANSWER: Main Menu/Addons/Camd: no->mgcamd->...camd3 /Restart camd
ANSWER: Main Menu/Addons/Camd: no->mgcamd->[email protected](or daemon) /Restart camd
************************************************** ********************
Please, remember that
"Re-Zap on emu switch time"-parameter is recommended to put value 5 or 6!
See QuickStart.
You can start recording the crypt-channel and...
and zap to next crypt-channel and to look it or to zap next and next, etc.
JUST SWITCH EMU TO MGCAMD AND START YOU RECORD/VIEWING!

How to get updates and addons.
-----------
At first, dreambox must has internet-connection!
1. Main Menu, Service, Software Update, Updatemode: internet
2. search for new version...

How to install addons manual.
-----------
At first, our neutrino's addons is not same as enigma's addons!
1. Put addon-file(addon_name.bin) to /tmp
1. Main Menu, Service, Software Update, Updatemode: manual(ftp)
2. search for new version...
3. Filebrowser /tmp/, press to addon-file(addon_name.bin)
4. follow instruction

We have nothing against modifications to our Neutrino
images, if you follow our small conditions, namely:
1. The original Readme files must remain in archives with
your mod image.
The same counts to all readme and info files within the image.

How can you check who is original creator of the image?
There is information in file called ".version" in root
directory of every image.
Please, leave it also unchanged.

2. NO KEYS/RSA/ROM files within your renamed - modified image.
3. We are glad, NAME of our team(ruDbox) in file names of your
archives and mod image independently to see,
e.g. - ruDbox **** _mod_your_name or your_name_mod_ruDbox ***.

That's all.
Certainly you cannot follow our requirements and continue
everything like it is.
Believe, however, that attention of our friends who use
our private images is enough for us.

ruDbox Team
#dbox2 /Dalnet


Multa bafta !