Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 3 of 3
  1. #1
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jan 2007
    Posts
    4
    Posts Thanks / Likes

    Default Do you have a SRT4125?


    If you do I sure could use your help.
    .My STR 4125 S/N 63040321495 has the D3C chip. I have loaded it with the X4125emu_D3C.rar.exe and then with the SRT4125 D3C(CONCORD).ZIP. This latest software loads my system with the CONCORD V103. I believe that I have downloaded all files pertaining to both the STRONG and CONCORD versions of my system. Initially I tried to load up my system as a STRONG but because of my D3C chip I kept getting locked up loading software not intended for my D3C chip. I selected the CONCORD version because the software I could load was further advanced than the STRONG version. (I liked the STRONG version better from a user standpoint and it appeared to have a more versatile way in inputting keys.) Now my questions:
    • Can someone advise me if there is software compatible with my D3C chip that will allow me to load my unit back to a STRONG version up to V105 or later? Everything I have tried to do this eventually bombs out, due to the D3C CHIP problem, before I can get up to the automatic roll for TPS etc.
    • Or can someone advise me if there is a newer version of the CONCORD for my D3C chip – LATER THAN V103? I have downloaded lots of software supposedly for my D3C chip with later version numbers but they either will not load as I am advised the software is not compatible or it does load and I get the problem where I can not set up channels which is an indication that the software is not intended for the D3C chip. I hold software up through V106 and although it appears it should be compatible with the D3C chip it is not.
    • And finally, is it possible to load key and channel updates via the null-modem cable? If so, which loader do you use. I have tried using the loaders that indicate they should do this but my receiver will not accept the input.

    I have researched my problems about as best I can for a newbie and have gone just about as far as I can go on my own. I would appreciate a little input on my problems and I will be most grateful for any input you can provide. Regards, Dwight1

  2. #2
    Platinum member Expert
    Join Date
    Aug 2005
    Location
    21.95° N 97.06° E
    Posts
    6,263
    Posts Thanks / Likes

    Default

    Hello friend, welcome to RDI.Sorry I don't know exactly about ur receiver but u can check this link for Strong receivers.In there u can ask Mr.SKY who is doing great job in there about SRT.


    Hope it'll help u anyway.
    " 李俊明 Born To Help People "

    DM 500s , Pacific 3600 CI , Humax F2 Finder , Angel Box , My Dream Machine , Tatasky , KAON , Topfield 3030 , Yuri YR1Dap , Dynasat 7100 , F1 , Plus and II , Metabox II , 10 , Viva Vs 9000 , SkyBox II , X-Sat 430 , 420 , Bolt N2 , NewB , New Shine Ns 3000 , Victory V 889 , F1 Newshine , New Star , Innovia 3088 CA , Atom 7000 , PBI , Prosat , Dstv 3Q76 , GA 88a , Tatasky , Big Tv , Airtel .



  3. #3
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jan 2007
    Posts
    4
    Posts Thanks / Likes

    Default thank you Yan Naing for your reply.


    I joined the other forum and posted my question. I looked at their postings, however, and they had not questions on the 4125. I recently returned from the states bringing with me my ariza receiver which is useless here I found. Anyway, when I got here I went out and bought a dish and my STRONG 4125 was in the box with my new dish. I have been playing with it for about 3 weeks now and about to throw it in the garbage as support is almost nill and its not that good a unit in the first place. I know strong makes better units. Can you recommend one that has a card reader section, that can be loaded with emu key, can handle subtitles, has a little more than the usual memory and most important one that you can expect timely updates Regards and thanks, Dwight1

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top