Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 27 EUR (27%)
Donate to support this site...

Page 1 of 6 123 ... LastLast
Results 1 to 15 of 81
  1. #1
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes

    Default Starsat Basic And Expert Methods

    CODE
    Starsat SR-X 550 D (Plus)(Super)(Ultra): DVB-S, 4000 Ch., FTA

    Starsat SR-X 650 CI Plus: DVB-S, 2000 Ch., 2x Common Interface

    Starsat SR-X 3500 CUCI(Plus)(Super)(Ultra): DVB-S, 6000 Ch., 2 embedded Universal CAM, 2x Common Interface

    Starsat SR-X 3200 CU(Plus)(Super)(Ultra): DVB-S, 4000 Ch., embedded 2x Universal

    Starsat SR-X 3100CU(Plus)(Ultra): DVB-S, 4000 Ch., 1x CAS



    Starsat Family(550 650 3100 3200 3500 560)&clons:


    Master Code:
    9 8 7 6 or 9 8 7 6 0 0
    3 4 5 3 or 3 4 5 3 0 0


    Essinal note befor load new SW(software
    to not lose channels simply enter the backup & restore option and select backup system then after upgrade new sw make a restore system and every htink will be fine.


    Loder SW & Picture(not use it for channels
    _ Tools=August_26,Tools_x550_650_3100_3200_3500
    or Tools=IRDTOOL or here



    SOFTCAM LOADER 100%WORK
    شرح بالصور للبرنامج explanation (key editor) in English & French
    http://satrecerver.9.forumer.com/ind...showtopic=2198
    [/b]

    to let decoding works
    press menu
    go to last line( parental lock) and press ok
    for serial number press numbers:
    (truman= 295(bright = 3453)(starsat super = 345300)(Metronic K-BOX=111(micro-x mdr =3453)
    then go out by press menu
    now decoding channel works and code option appear

    Loder Channels(only tow usage):

    1-upload & download channels
    2-reading channel file(.img) OR reading STB channels
    PCEditor_v1 OR PCEditor OR here OR here or here
    & to avoid problems simply do one of the tow usage once then close the program & run it again for the second usage.



    1.How to enter codes menu?
    How the code manually Starsat Family(550 650 3100 3200 3500 560)&clons:
    according to the type of used sw u should do the following:
    ************************************************** *
    for STARSAT SUPER = STARCOM SUPER SW:
    Press____menu____installition____last line = input code press OK.
    ************************************************** *
    for starsat ULTRA SW"
    Press______menu____ press digit 1 2 3 4 & will appeare.
    ************************************************** *
    for sony sat 9000 plus & 9800 plus SW:
    Press____menu____installation_____last line = input code press OK.
    ************************************************** *
    for sonysat 9500 SW:
    Press______menu____ press digit 1 2 3 4 & will appeare.
    ************************************************** *
    for TRUMAN SW:
    to enter code menu & activate decoding:
    Press____menu____lest line = Parental control press OK____enter digit 2 9 5 8 then press menu the

    code option will appear and decoding begin
    ************************************************** *
    for Bright & Micro-x SW:
    to enter code menu & activate decoding:
    Press____menu____lest line = Parental control press OK____enter digit 3 4 5 3 then press menu the

    code option will appear and decoding begin

    __________________________________________________ ______________

    2.choosing the right encryption type:
    encryption types are:
    -Betacrypt, ******, Seca, VIACCESS, NAGRVISION, CONAX,BISS,NDS.POWRVIEW,SHL,etc.
    -choosing the encryption type depend on Package u chooseed.
    For POLSAT DIDITAL+ TV CABO MEDIAPARKE:is NAGRVISION
    For TPS :is VIACCESS.
    __________________________________________________ ______________

    3.choose the right provider(four digit= XXXX):
    EACH Package have special providers:
    for POLSAT:7001 OR 7101
    for TV CABO:4801 OR 4901
    for DIGITAL+:4001 OR 4101
    for MEDIAPARKE:1811 OR 1911
    for TPS: 007C00

    __________________________________________________ ______________

    4.choose the right index(tow digit = XX):
    I.FOR POLSAT DIGITAL+ TV CABO MEDIAPARKE There is indexs refer to NGRA1 &
    NAGRA2:
    NAGRA 1: indexs are:00 & 01 now don't change.
    NAGRA 2: indexs are depend on Provider:
    for first mentiomed Provider(7001-4001-4801-1811) indexs are:80 & 81.
    for second mentiomed Provider(7101-4101-4901-1911) indexs are:90 & 91.
    II.FOR TPS the changing keys provider are:00 & 01
    __________________________________________________ ______________

    5. enter the new keys(16 digits for one index line):
    when u used a program to give u the latest keys(softcam.key file)
    u will find that the new keys consiste of 32 digit while each index line fulled with only 16 digit &
    providers given are different of what u see on your receiver(usually 00 & 01)
    (IGONAR THE 128 DIGIT LINES)
    SO u should do the following:
    1.every 32 digit line divided to tow lines with 16 digit in each one.
    2.put it in the right index as follows:
    -for POLSAT DIGITAL+ TV CABO MEDIAPARKE:u will given tow lines with index 00 & 01 and

    each one cosiste of 32 digit :
    divid index line 00 to tow 16 line and give it the indexs:80 & 81
    divid index line 01to tow 16 line and give it the indexs:90 & 91
    -for TPS:divid index line 00 to tow 16 line and give it the indexs:01 & 11
    ENTER THE KEYS
    LISTEN other indexs of TPS rarely changed & NAGRA1 indexs of POLSAT DIGITAL+ TV CABO MEDIAPARKE rarely changed.



    Clons for this family:

    __starcom 550 super = starcom 550 ultra v365(the latest ok)
    = sonysat 9500 = sonysat 9000 plus
    = truman 100 = TRUMAN 100 SUPER
    = bright 4200
    = micro-x mdr 4500
    = magic 2004
    = D-box DB-8800
    = Metronic K-BOX F


    __starcom 650 super = starcom 650 ultra v365(the latest)
    = sonysat 9800 plus
    = truman200
    = bright4400 Metronic K-BOX C


    starcom 3100 super = starcom 3100 ultra v365(the latest) = TRUMAN Platinum = bright 4300
    starcom 3200 super = starcom 3200 ultra v365(the latest) = TRUMAN diamond
    starcom 3500 super = starcom 3500 ultra v365(the latest) = TRUMAN Gold

    Important notes:
    1.to be able to load different sw on your STB u should first(erase protocol)by HEX programs &replace it by letters(FFFF)as follows:
    (starsat =1700)(bright=2D00)(sonysat=1500)(truman=1F00)
    2.some versions may be protected by error line to not be able install on all clons.



    CODE
    Starsat SR-X 1500D-Super (Super MKII): DVB-S, 4000 Ch., FTA




    CODE
    Omax OM-R100: DVB-S, FTA




    CODE
    Starsat SR-X 1600 D-Super: DVB-S, 4000 Ch., FTA



    starsat family 1500 1600 1900

    After upgrade these stb the remotcontrol donnot work?

    simply do any of the following:
    1.
    menu
    stb setting
    other setting
    rcu mode
    choose 04
    2. do a factory restor
    3.reinstall the patch



    starsat 1500 1600 1900 clons ( tunner sharp)

    -starsat SR-X1500D SUPER MKII
    -omax-R100
    -Telecom 1500 SUPER MKII
    -Dream 2000
    - comag sl 55
    - Dansat G9+8+7
    - Dansat GX: DVB-S, 4000 Ch., FTA
    - Univers U-4105
    - Univers U4101 - 4102
    - Citizen 2000
    - Citizen Sat DVB-5500 Ultra
    - Starvision 5100/ 5200/ 5300/ 5400
    - Boca Chess SL 55
    - DSR
    - Premier PRS-10100
    - Premier PRS-10200
    - Premier PRS-10300
    - Premier PRS-10350
    - Preisner SRD-1000 S/B
    - Univers U4101/ 4102
    -Univers U-4105 :
    FTE Maximal IRD 120
    FTE Maximal IRD 390 & 390M
    FTE Maximal IRD 410
    FTE Maximal IRD 420 & 420M
    FTE Maximal IRD 420SM
    FTE Maximal IRD 450 CI
    Beausat BSR-900/BSR-905/BSR-911 S/BSR-2003
    Citizen 2000
    Boca DSR 103/DSR 104 OTA
    Citizen Sat DVB-5500 Ultra
    Comag DVB III FTA
    Comag DVB III FTA OTA
    Comag FTA 311
    Comag SL-55
    Porty I
    SatConn DVB-2003 FTA
    Satconn DVB 2000 FTA
    SKT SDR-200/SDR-201/DTR-201
    StarSat SR-X 1500D
    StarSat SR-X 1600D
    TokyoSat DVB-2300 FTA
    New Star 201,
    DVB 5013 oraz
    DVB 5013M
    Sanyo Gold
    Sanyo Plus
    S-DVB 9600


    CODE
    Starsat SR-X1700D: DVB-S, 5000 Ch., FTA

    Starsat SR-X2700CI: DVB-S, 2x Common Interface




    CODE
    Starsat SR-X1300D: DVB-S, 5000 Ch., FTA




    CODE
    Starsat SR-X1800D: DVB-S, 5000 Ch., FTA

    Starsat SR-X2800CI: DVB-S, 5000 Ch., 2x Common Interface





    CODE
    Starsat SR-X 1100 D: DVB-S, 5000 Ch., FTA


    starsat family 1100 1300 1700 1800


    To enter the code page:
    menu
    setting then press 1 2 3 4
    طريقة الدخول على صفحة الكودات:
    اضغط مينو ضبط النظام 1 2 3 4



    To load keys ?
    u should use the program (Transponder Editer ) to make appropriate key file for your loader (COMUpgrade)depending on softcam.bin file,
    u should use .bin key file and use the mentoined program to convert it to the right extension then use the loader(COMUpgrade) to load it



    the clones for this starsat family is:

    condor 4000c 4500
    =TOPSAT 5000 ULTRA = topsat5000(pal)
    =ASTROVOX 160 SUPER=Astrovox VSR 2500
    =beausat 2004
    =echostar 900 fta
    =Coship 2300
    =tboston4500
    =axil ad600
    =truman 9000
    =srt 3680
    =Iris 3000= Iris3300
    =Bigsat 5000=Bigsat 8000
    =Visiosat TVS 4500
    =Koscom DSR 5002
    =Maxtronics DSR 5200
    = Digisky DGS2300

    note:
    when u convert it to condor 4500 & astrvox:
    the remote control function change which mean buttone (scan) do the followingsat function)
    _the benifit from changing to condor 4500 is biss & cryptworks decoding
    ofcourse the loading sw is the same(waiting for word good)then turn off the stb then turn on then the word UCA will appear on receirver screen & the remote will not coresponde untill u press buttone(TV/AV) &continu pressing till the four zero 0000 appear and every think ia alright



    A little note about loading channels :
    _u should make reset factory after loading channels.



    Activate decoding?
    _u should activate decoding appropriate to the used sw:
    beausat 2004--menu-information recepteur-2259
    echostar-menu-information recepteur- 2020
    for other clons try the mentioned numbers or the folowing(i don,t have the stb to try now,sorry)
    7799-8686-8800


    CODE
    Starsat SR-X190D(DF)(D Super)(D Super F): DVB-S, 6000 Ch., FTA

    Starsat SR-X3300CU(CU F): DVB-S, 6000 Ch., Emb.CAS


    190+220+ +3300+3000+30+3+50+5

    Master code:
    2 1 4 2 or 9 8 7 6

    To enter code page:
    press 0

    the clons for this family

    starsat 190 = goldeninterstar 8001
    starsat 190 super= goldeninterstar 8001s etc





    How to edite the official sw file of goldeninterstar(D & S) to be able to load to starsat(D & super) device

    The method simple but need carefull and attention
    we need the attached file and HEX program
    for example:edit goldeninterstar8001s to be pass to starsat 190 super
    take the official sw of goldeninterstar & open it by hex program
    then go to the end of sw as in picture
    open the file:
    190super to 8001s
    & mark it all and copy all 190super to 8001 s in the end of sw
    & same method for all clons
    note:
    edite the latest sw and load the new tps keys and work fine



    CODE
    Starsat SR-X 150 D Plus/ 200 CI (Plus): DVB-S, 2000 Ch., 2x Common Interface

    Starsat SR-X 300 PVR: DVB-S, 2000 Ch., PVR 20 GB HDD, 2 Common Interface

    Starcom FTA: DVB-S, FTA

    Starcom CI: DVB-S, 2x Common Interface

    Starcom CIP: DVB-S, 2x Common Interface, Positioner

    Starcom PVRCI: DVB-S, PVR, 2x Common Interface

    Starsat SR-P250CI: DVB-S, 2x Common Interface, Positioner

    Omax 1000 FTA: DVB-S, FTA

    Omax 2000 CI: DVB-S,




    CODE
    Starsat SR-X 120 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




    CODE
    Starsat SR-X 130 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




    Starsat 120-130-150-200 family

    Master code:
    9876



    Clones for this family(will be updated soon)
    Starsat 200 ci = CONDOR 5000CI
    Starsat 200 = Astra 9500 =Hivision 5000
    Starsat 120-130-150 PLUS 1M = CONDOR 5000 FTA
    Starsat 150 = Astra 9800
    Starsat 120 = Astra 9000


    CODE
    Starsat SR-X 1200D: DVB-S, 6500 Ch., FTA




    CODE
    Starsat SR-X 1400D: DVB-S, 6500 Ch., FTA




    CODE
    Starsat SR-X 2200 IR: DVB-S, 6000 Ch., emb. CAS



    starsat 150 super new+ 550CX +1200 1400 + 1500 ultra +2200 4000 4200 5100 5200

    1) Key menu: Main Menu + 0
    2) Current Key: INFO+0
    3) All ECM List: INFO+1

    Master code:
    press menu +installation ok+stb+okpress + 9876
    ++++++
    starsat550cx master code:
    1999 or 1361

    Activate decoding:
    Menu + 2020

    Note:
    U should not load the patch unless u load first the 2 mega patch

    Clones for this family: 5200 fte max s 100
    echolink 700
    omaxr10
    Red Qmax 999
    Truman xtrem2
    DRAGON x



    After load new sw the device halt?
    1)turn off the elctricity
    2)press power button in front of device for 4 seconds the leave the button& load what u want
    3)make resat factory
    starsat AG-R5500D :


    Important notes:
    1)to load latest sw u should load the latest bootloader
    2)Fater load new bootloader turn the device off & don,t turn it on ,only for load sw else the flash damaged &u need j-tag
    3-The difference between: TRUMAN 100 & TRUMAN 100PLUS.
    _ truman 150 ultra = truman 150 = starsat 5500D = truman 100 plus
    _starsat 550D = truman 100.



    Clones for this device:
    starsat AG-R5500D :
    TRUMAN 100 plus = truman 150 ultra =TRUMAN 150 =
    starsat AG-R5500D =starsat 5000 =
    DSN_GR6300 =
    YUMATU_MX =
    astrasat-magnom =
    STARTRACK 550 =
    SANSUNG K864 =
    NEOSAT 1600 =
    BY JACK0
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  2. #2
    Platinum member Expert
    Join Date
    Aug 2005
    Location
    21.95° N 97.06° E
    Posts
    6,262
    Posts Thanks / Likes

    Default

    Great job emco 83.Keep it up.


    Thanks.
    " 李俊明 Born To Help People "

    DM 500s , Pacific 3600 CI , Humax F2 Finder , Angel Box , My Dream Machine , Tatasky , KAON , Topfield 3030 , Yuri YR1Dap , Dynasat 7100 , F1 , Plus and II , Metabox II , 10 , Viva Vs 9000 , SkyBox II , X-Sat 430 , 420 , Bolt N2 , NewB , New Shine Ns 3000 , Victory V 889 , F1 Newshine , New Star , Innovia 3088 CA , Atom 7000 , PBI , Prosat , Dstv 3Q76 , GA 88a , Tatasky , Big Tv , Airtel .



  3. #3
    FINISHED&GONE WITH SILENT Expert
    RDI - Board Default Avatar

    Join Date
    Feb 2004
    Posts
    2,674
    Posts Thanks / Likes

    Default

    simply superb................

  4. #4
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes

    Default

    thanks georgekamal and yan naing
    click here http://rapidshare.com/files/13594658...at_Softcam.rar
    to download the starsat softcam.SEX VIEW ADDED AND OTHER KEYS
    ENJOY
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  5. #5
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes

    Default

    and here you have the key editor
    http://rapidshare.com/files/13596935...or_Starsat.zip
    ENJOY
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  6. #6
    FINISHED&GONE WITH SILENT Expert
    RDI - Board Default Avatar

    Join Date
    Feb 2004
    Posts
    2,674
    Posts Thanks / Likes

    Default

    Quote Originally Posted by emco83 View Post
    and here you have the key editor
    http://rapidshare.com/files/13596935...or_Starsat.zip
    ENJOY
    thankx a lot and godbless u bro..........
    very best regards-george

  7. #7
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jan 2007
    Posts
    4
    Posts Thanks / Likes

    Default Starsat srx 4200D

    How do I access the menu for entering codes for FTA receiver Starsat SR-x4200D asnwell as Sky X (model XX)

  8. #8
    Senior Member Expert
    Join Date
    Nov 2004
    Posts
    1,766
    Posts Thanks / Likes

    Default star sat software in micro-x mdr 4500 fta

    can we upload star sat super software in micro-x mdr 4500 fta receiver, and will it get auto update code after ulpoad.

  9. #9
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Dec 2006
    Posts
    23
    Posts Thanks / Likes

    Default

    Quote Originally Posted by emco83 View Post
    CODE
    Starsat SR-X 550 D (Plus)(Super)(Ultra): DVB-S, 4000 Ch., FTA

    Starsat SR-X 650 CI Plus: DVB-S, 2000 Ch., 2x Common Interface

    Starsat SR-X 3500 CUCI(Plus)(Super)(Ultra): DVB-S, 6000 Ch., 2 embedded Universal CAM, 2x Common Interface

    Starsat SR-X 3200 CU(Plus)(Super)(Ultra): DVB-S, 4000 Ch., embedded 2x Universal

    Starsat SR-X 3100CU(Plus)(Ultra): DVB-S, 4000 Ch., 1x CAS



    Starsat Family(550 650 3100 3200 3500 560)&clons:


    Master Code:
    9 8 7 6 or 9 8 7 6 0 0
    3 4 5 3 or 3 4 5 3 0 0


    Essinal note befor load new SW(software
    to not lose channels simply enter the backup & restore option and select backup system then after upgrade new sw make a restore system and every htink will be fine.


    Loder SW & Picture(not use it for channels
    _ Tools=August_26,Tools_x550_650_3100_3200_3500
    or Tools=IRDTOOL or here



    SOFTCAM LOADER 100%WORK
    شرح بالصور للبرنامج explanation (key editor) in English & French
    http://satrecerver.9.forumer.com/ind...showtopic=2198
    [/b]

    to let decoding works
    press menu
    go to last line( parental lock) and press ok
    for serial number press numbers:
    (truman= 295(bright = 3453)(starsat super = 345300)(Metronic K-BOX=111(micro-x mdr =3453)
    then go out by press menu
    now decoding channel works and code option appear

    Loder Channels(only tow usage):

    1-upload & download channels
    2-reading channel file(.img) OR reading STB channels
    PCEditor_v1 OR PCEditor OR here OR here or here
    & to avoid problems simply do one of the tow usage once then close the program & run it again for the second usage.



    1.How to enter codes menu?
    How the code manually Starsat Family(550 650 3100 3200 3500 560)&clons:
    according to the type of used sw u should do the following:
    ************************************************** *
    for STARSAT SUPER = STARCOM SUPER SW:
    Press____menu____installition____last line = input code press OK.
    ************************************************** *
    for starsat ULTRA SW"
    Press______menu____ press digit 1 2 3 4 & will appeare.
    ************************************************** *
    for sony sat 9000 plus & 9800 plus SW:
    Press____menu____installation_____last line = input code press OK.
    ************************************************** *
    for sonysat 9500 SW:
    Press______menu____ press digit 1 2 3 4 & will appeare.
    ************************************************** *
    for TRUMAN SW:
    to enter code menu & activate decoding:
    Press____menu____lest line = Parental control press OK____enter digit 2 9 5 8 then press menu the

    code option will appear and decoding begin
    ************************************************** *
    for Bright & Micro-x SW:
    to enter code menu & activate decoding:
    Press____menu____lest line = Parental control press OK____enter digit 3 4 5 3 then press menu the

    code option will appear and decoding begin

    __________________________________________________ ______________

    2.choosing the right encryption type:
    encryption types are:
    -Betacrypt, ******, Seca, VIACCESS, NAGRVISION, CONAX,BISS,NDS.POWRVIEW,SHL,etc.
    -choosing the encryption type depend on Package u chooseed.
    For POLSAT DIDITAL+ TV CABO MEDIAPARKE:is NAGRVISION
    For TPS :is VIACCESS.
    __________________________________________________ ______________

    3.choose the right provider(four digit= XXXX):
    EACH Package have special providers:
    for POLSAT:7001 OR 7101
    for TV CABO:4801 OR 4901
    for DIGITAL+:4001 OR 4101
    for MEDIAPARKE:1811 OR 1911
    for TPS: 007C00

    __________________________________________________ ______________

    4.choose the right index(tow digit = XX):
    I.FOR POLSAT DIGITAL+ TV CABO MEDIAPARKE There is indexs refer to NGRA1 &
    NAGRA2:
    NAGRA 1: indexs are:00 & 01 now don't change.
    NAGRA 2: indexs are depend on Provider:
    for first mentiomed Provider(7001-4001-4801-1811) indexs are:80 & 81.
    for second mentiomed Provider(7101-4101-4901-1911) indexs are:90 & 91.
    II.FOR TPS the changing keys provider are:00 & 01
    __________________________________________________ ______________

    5. enter the new keys(16 digits for one index line):
    when u used a program to give u the latest keys(softcam.key file)
    u will find that the new keys consiste of 32 digit while each index line fulled with only 16 digit &
    providers given are different of what u see on your receiver(usually 00 & 01)
    (IGONAR THE 128 DIGIT LINES)
    SO u should do the following:
    1.every 32 digit line divided to tow lines with 16 digit in each one.
    2.put it in the right index as follows:
    -for POLSAT DIGITAL+ TV CABO MEDIAPARKE:u will given tow lines with index 00 & 01 and

    each one cosiste of 32 digit :
    divid index line 00 to tow 16 line and give it the indexs:80 & 81
    divid index line 01to tow 16 line and give it the indexs:90 & 91
    -for TPS:divid index line 00 to tow 16 line and give it the indexs:01 & 11
    ENTER THE KEYS
    LISTEN other indexs of TPS rarely changed & NAGRA1 indexs of POLSAT DIGITAL+ TV CABO MEDIAPARKE rarely changed.



    Clons for this family:

    __starcom 550 super = starcom 550 ultra v365(the latest ok)
    = sonysat 9500 = sonysat 9000 plus
    = truman 100 = TRUMAN 100 SUPER
    = bright 4200
    = micro-x mdr 4500
    = magic 2004
    = D-box DB-8800
    = Metronic K-BOX F


    __starcom 650 super = starcom 650 ultra v365(the latest)
    = sonysat 9800 plus
    = truman200
    = bright4400 Metronic K-BOX C


    starcom 3100 super = starcom 3100 ultra v365(the latest) = TRUMAN Platinum = bright 4300
    starcom 3200 super = starcom 3200 ultra v365(the latest) = TRUMAN diamond
    starcom 3500 super = starcom 3500 ultra v365(the latest) = TRUMAN Gold

    Important notes:
    1.to be able to load different sw on your STB u should first(erase protocol)by HEX programs &replace it by letters(FFFF)as follows:
    (starsat =1700)(bright=2D00)(sonysat=1500)(truman=1F00)
    2.some versions may be protected by error line to not be able install on all clons.



    CODE
    Starsat SR-X 1500D-Super (Super MKII): DVB-S, 4000 Ch., FTA




    CODE
    Omax OM-R100: DVB-S, FTA




    CODE
    Starsat SR-X 1600 D-Super: DVB-S, 4000 Ch., FTA



    starsat family 1500 1600 1900

    After upgrade these stb the remotcontrol donnot work?

    simply do any of the following:
    1.
    menu
    stb setting
    other setting
    rcu mode
    choose 04
    2. do a factory restor
    3.reinstall the patch



    starsat 1500 1600 1900 clons ( tunner sharp)

    -starsat SR-X1500D SUPER MKII
    -omax-R100
    -Telecom 1500 SUPER MKII
    -Dream 2000
    - comag sl 55
    - Dansat G9+8+7
    - Dansat GX: DVB-S, 4000 Ch., FTA
    - Univers U-4105
    - Univers U4101 - 4102
    - Citizen 2000
    - Citizen Sat DVB-5500 Ultra
    - Starvision 5100/ 5200/ 5300/ 5400
    - Boca Chess SL 55
    - DSR
    - Premier PRS-10100
    - Premier PRS-10200
    - Premier PRS-10300
    - Premier PRS-10350
    - Preisner SRD-1000 S/B
    - Univers U4101/ 4102
    -Univers U-4105 :
    FTE Maximal IRD 120
    FTE Maximal IRD 390 & 390M
    FTE Maximal IRD 410
    FTE Maximal IRD 420 & 420M
    FTE Maximal IRD 420SM
    FTE Maximal IRD 450 CI
    Beausat BSR-900/BSR-905/BSR-911 S/BSR-2003
    Citizen 2000
    Boca DSR 103/DSR 104 OTA
    Citizen Sat DVB-5500 Ultra
    Comag DVB III FTA
    Comag DVB III FTA OTA
    Comag FTA 311
    Comag SL-55
    Porty I
    SatConn DVB-2003 FTA
    Satconn DVB 2000 FTA
    SKT SDR-200/SDR-201/DTR-201
    StarSat SR-X 1500D
    StarSat SR-X 1600D
    TokyoSat DVB-2300 FTA
    New Star 201,
    DVB 5013 oraz
    DVB 5013M
    Sanyo Gold
    Sanyo Plus
    S-DVB 9600


    CODE
    Starsat SR-X1700D: DVB-S, 5000 Ch., FTA

    Starsat SR-X2700CI: DVB-S, 2x Common Interface




    CODE
    Starsat SR-X1300D: DVB-S, 5000 Ch., FTA




    CODE
    Starsat SR-X1800D: DVB-S, 5000 Ch., FTA

    Starsat SR-X2800CI: DVB-S, 5000 Ch., 2x Common Interface





    CODE
    Starsat SR-X 1100 D: DVB-S, 5000 Ch., FTA


    starsat family 1100 1300 1700 1800


    To enter the code page:
    menu
    setting then press 1 2 3 4
    طريقة الدخول على صفحة الكودات:
    اضغط مينو ضبط النظام 1 2 3 4



    To load keys ?
    u should use the program (Transponder Editer ) to make appropriate key file for your loader (COMUpgrade)depending on softcam.bin file,
    u should use .bin key file and use the mentoined program to convert it to the right extension then use the loader(COMUpgrade) to load it



    the clones for this starsat family is:

    condor 4000c 4500
    =TOPSAT 5000 ULTRA = topsat5000(pal)
    =ASTROVOX 160 SUPER=Astrovox VSR 2500
    =beausat 2004
    =echostar 900 fta
    =Coship 2300
    =tboston4500
    =axil ad600
    =truman 9000
    =srt 3680
    =Iris 3000= Iris3300
    =Bigsat 5000=Bigsat 8000
    =Visiosat TVS 4500
    =Koscom DSR 5002
    =Maxtronics DSR 5200
    = Digisky DGS2300

    note:
    when u convert it to condor 4500 & astrvox:
    the remote control function change which mean buttone (scan) do the followingsat function)
    _the benifit from changing to condor 4500 is biss & cryptworks decoding
    ofcourse the loading sw is the same(waiting for word good)then turn off the stb then turn on then the word UCA will appear on receirver screen & the remote will not coresponde untill u press buttone(TV/AV) &continu pressing till the four zero 0000 appear and every think ia alright



    A little note about loading channels :
    _u should make reset factory after loading channels.



    Activate decoding?
    _u should activate decoding appropriate to the used sw:
    beausat 2004--menu-information recepteur-2259
    echostar-menu-information recepteur- 2020
    for other clons try the mentioned numbers or the folowing(i don,t have the stb to try now,sorry)
    7799-8686-8800


    CODE
    Starsat SR-X190D(DF)(D Super)(D Super F): DVB-S, 6000 Ch., FTA

    Starsat SR-X3300CU(CU F): DVB-S, 6000 Ch., Emb.CAS


    190+220+ +3300+3000+30+3+50+5

    Master code:
    2 1 4 2 or 9 8 7 6

    To enter code page:
    press 0

    the clons for this family

    starsat 190 = goldeninterstar 8001
    starsat 190 super= goldeninterstar 8001s etc





    How to edite the official sw file of goldeninterstar(D & S) to be able to load to starsat(D & super) device

    The method simple but need carefull and attention
    we need the attached file and HEX program
    for example:edit goldeninterstar8001s to be pass to starsat 190 super
    take the official sw of goldeninterstar & open it by hex program
    then go to the end of sw as in picture
    open the file:
    190super to 8001s
    & mark it all and copy all 190super to 8001 s in the end of sw
    & same method for all clons
    note:
    edite the latest sw and load the new tps keys and work fine



    CODE
    Starsat SR-X 150 D Plus/ 200 CI (Plus): DVB-S, 2000 Ch., 2x Common Interface

    Starsat SR-X 300 PVR: DVB-S, 2000 Ch., PVR 20 GB HDD, 2 Common Interface

    Starcom FTA: DVB-S, FTA

    Starcom CI: DVB-S, 2x Common Interface

    Starcom CIP: DVB-S, 2x Common Interface, Positioner

    Starcom PVRCI: DVB-S, PVR, 2x Common Interface

    Starsat SR-P250CI: DVB-S, 2x Common Interface, Positioner

    Omax 1000 FTA: DVB-S, FTA

    Omax 2000 CI: DVB-S,




    CODE
    Starsat SR-X 120 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




    CODE
    Starsat SR-X 130 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




    Starsat 120-130-150-200 family

    Master code:
    9876



    Clones for this family(will be updated soon)
    Starsat 200 ci = CONDOR 5000CI
    Starsat 200 = Astra 9500 =Hivision 5000
    Starsat 120-130-150 PLUS 1M = CONDOR 5000 FTA
    Starsat 150 = Astra 9800
    Starsat 120 = Astra 9000


    CODE
    Starsat SR-X 1200D: DVB-S, 6500 Ch., FTA




    CODE
    Starsat SR-X 1400D: DVB-S, 6500 Ch., FTA




    CODE
    Starsat SR-X 2200 IR: DVB-S, 6000 Ch., emb. CAS



    starsat 150 super new+ 550CX +1200 1400 + 1500 ultra +2200 4000 4200 5100 5200

    1) Key menu: Main Menu + 0
    2) Current Key: INFO+0
    3) All ECM List: INFO+1

    Master code:
    press menu +installation ok+stb+okpress + 9876
    ++++++
    starsat550cx master code:
    1999 or 1361

    Activate decoding:
    Menu + 2020

    Note:
    U should not load the patch unless u load first the 2 mega patch

    Clones for this family: 5200 fte max s 100
    echolink 700
    omaxr10
    Red Qmax 999
    Truman xtrem2
    DRAGON x



    After load new sw the device halt?
    1)turn off the elctricity
    2)press power button in front of device for 4 seconds the leave the button& load what u want
    3)make resat factory
    starsat AG-R5500D :


    Important notes:
    1)to load latest sw u should load the latest bootloader
    2)Fater load new bootloader turn the device off & don,t turn it on ,only for load sw else the flash damaged &u need j-tag
    3-The difference between: TRUMAN 100 & TRUMAN 100PLUS.
    _ truman 150 ultra = truman 150 = starsat 5500D = truman 100 plus
    _starsat 550D = truman 100.



    Clones for this device:
    starsat AG-R5500D :
    TRUMAN 100 plus = truman 150 ultra =TRUMAN 150 =
    starsat AG-R5500D =starsat 5000 =
    DSN_GR6300 =
    YUMATU_MX =
    astrasat-magnom =
    STARTRACK 550 =
    SANSUNG K864 =
    NEOSAT 1600 =
    BY JACK0
    dear sir ! how about starsat 2100cu? is it included in your list? are there other s/w for 2100cu possible to be loaded?

  10. #10
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes

    Default

    for christianity
    yes you can download the sw
    click here http://www.sharebigfile.com/file/709...90107-rar.html
    this is the lasw sw for your model
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  11. #11
    FINISHED&GONE WITH SILENT Expert
    RDI - Board Default Avatar

    Join Date
    Feb 2004
    Posts
    2,674
    Posts Thanks / Likes

    Default

    Quote Originally Posted by emco83 View Post
    and here you have the key editor
    http://rapidshare.com/files/13596935...or_Starsat.zip
    ENJOY
    doesn't open the key editer.....plz post the link page........
    regards-george

  12. #12
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes

    Default

    Quote Originally Posted by scrombi View Post
    can we upload star sat super software in micro-x mdr 4500 fta receiver, and will it get auto update code after ulpoad.
    that stb works with starsat 550d super and the method is the same.first clean your flash with id truman,download the sw from 550d super,then you can download the key editor for starsat.
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  13. #13
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes

    Default

    and now for the sw's
    click here http://sharebigfile.com/file/70927/S...-2007-rar.html
    for 1200 1400 models
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  14. #14
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

  15. #15
    Member Mentor
    Join Date
    Jun 2004
    Location
    somewhere in a middle of nowhere
    Posts
    859
    Posts Thanks / Likes
    DREAMBOX 500S
    STARSAT 550D SUPER
    DISH 140CM PARABOLE
    LNB GRUNDIG

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top