Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 8 of 8
  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2006
    Location
    Suceava-Germania
    Posts
    122
    Posts Thanks / Likes

    Default srt 6355 mort ??

    Seara buna . am schimbat bootloader, la 6355 plus urt blue ,patch si chey , totul a decurs bine , dar la aprindere nu vrea din prima , trebuie sa il bag in priza si scos din priza de cca 15, 18 ori si pornea astazi am incercat de vreo 30- ori si nu se mai aprinde adica ledul on este verde si patru de minus , cam asa - - - - nici nu pot sa bag alt soft mi sa irosit degetul tinind apasat ca sa apara DEST ca sa-i bag alt soft ,care stiti unde am gresit va rog dati si mie o indrumare ce ar fi de facut , merci fain...

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2006
    Location
    Suceava-Germania
    Posts
    122
    Posts Thanks / Likes

    Default 6355ci

    Danke Spaniolul , am incercat sa pun din nou bootloader, dar cind dau conect incepe putin sa incarce , pachet 1 din ? si se opreste , iar in stinga jos linia albastra care trebuie sa mearga pina la capat se opreste la cca doi mm, iar pe displei scrie DONE si asa ramine, deci incepe cu DEST las butonul, incepe si se blocheaza nu mai primeste incarcarea Bootloader asa am incercat de doua ori ca de atitea ori a reusit sa se aprinda , am mai incercat de vreo 20-ori sa-l aprind dar nu vrea il mai las sa se raceasca poate , poate am noroc sau ce ziceti este alta posibilitate? multam fain...

  3. #3
    Junior Member Teacher
    Join Date
    Feb 2004
    Location
    ALBA
    Posts
    379
    Posts Thanks / Likes

    Default

    pune urt-ul,patch si chei,bootloaderul se pune o singura data,a doua oara nu-l mai poti pune

  4. #4
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2005
    Posts
    196
    Posts Thanks / Likes

    Default 6335 mort ??

    Se pare ( 90 % ) ca la prima incarcare botloaderul nu s-a incarcat in mod corespunzator. Daca este asa cum cred eu adica , botloaderul afectat , singura solutie este Jtagul , stergerea flashului si recrierea cu fisierele originale. Eu as vrea sat te ajut dar nu ma pricep la 6335 fiindca nu am operat decat 4125 si Skymaster Dx24. Cred ca cel care te poate ajuta cu un sfat este Mihai P. Eu iti urez sa-l repari cat mai repede.

  5. #5
    Safe User Expert
    Join Date
    May 2005
    Posts
    2,956
    Posts Thanks / Likes

    Default

    Mda se pare ca bootloader-ul a fost scris corupt in sensul ca s-a strecurat o mica eroare in structura acestuia si acum nu mai functioneaza corespunzator.Pana sa apelezi la JTAG incearca sa revii la bootloader-ul original (exista o aplicatie return to original boot) ca cine stie e posibil sa il accepte iar daca operatiunea acesta este incununata de succes apoi trebuie pus soft original si gata l-ai readus la viata.Daca insa da gres atunci singura solutie e JTAG-ul.

    O sa-ti dau mai tarziu un link de unde poti lua return to original boot.

  6. #6
    Safe User Expert
    Join Date
    May 2005
    Posts
    2,956
    Posts Thanks / Likes

    Default

    SRT6_return_to_original_boot_via_RS_232

    Ai in arhiva loader-ul de boot precum si fisierul ce trebuie incarcat (tot cu extensia .urt)

    Apoi soft original de 6355 SRT6355 asta se incarca cu serialtrans ce se afla in arhiva cu return to original...

  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2006
    Location
    Suceava-Germania
    Posts
    122
    Posts Thanks / Likes

    Default 6355 ci

    Merci fain SAFETRON1 o intrebare as mai avea inainte de a incepe procedura cu ce prg se incarca return _to_original _boot _via - RS _232 cu aplication loader ? iar dupa , se pune softul org cu serialtrans , ca astazi vreau sa incerc poate il readuc in viata...

  8. #8
    Safe User Expert
    Join Date
    May 2005
    Posts
    2,956
    Posts Thanks / Likes

    Default Re: 6355 ci

    Quote Originally Posted by marginea29
    Merci fain SAFETRON1 o intrebare as mai avea inainte de a incepe procedura cu ce prg se incarca return _to_original _boot _via - RS _232 cu aplication loader ? iar dupa , se pune softul org cu serialtrans , ca astazi vreau sa incerc poate il readuc in viata...
    Te-ai uitat si tu in fisierele text unde este explicat cam tot ce trebuie sau nu stii engleza

    ia uite aici:

    If you need to return back to original software in the SRT6 then proceed with following steps:
    - make sure that TV set is connected to the receiver. You will need to control process on TV set screen.
    - connect PC and receiver by null-modem cable
    - turn receiver to update mode (hold CH Down button on front panel while connect receiver to the mains)
    - on PC run eWinloader1.1.2c. Press "Connect" button (or shortcut Ctrl+N) on the tool bar. If receiver connected not to the COM1 you will be noticed about this. Make sure to select correct COM port.
    - once connection established press "Upload data from PC to STB" button (or short cut F3) on the tool bar.
    - in dialog box select file Miniloader_p2o.urt and press "Open" button.
    - update process will start. You will see progress bar on TV screen and on your PC.

    Once uploading finished receiver will reboot with backup copy of boot first (you will see screen DCU181 mnldr 1.0 screen saying "Erasing OLD boot strap").
    After erasing old boot receiver will reboot again with original boot version 4.7.5bs.
    Now you can load original application using standard SerialTranxx tool.
    si pt serialtrans

    Quick notes for using SerialTran35

    To UPLOAD software to box:

    1. You need a RS232 serial cross-over (Laplink) cable to connect PC to the Receiver.

    2. To update the box with a new set of files, connect up serial cable and switch on the reciever WITH THE FRONT PANEL CH- key pressed.
    LED display will display 'DEST'. Power off and repeat until it does, or check with a TV on the scart if no display.

    3. Unzip SerialTran35.zip into a convenient directory, also the update files.

    4. Double click serialtran35.exe, then Options/setup to define the reqd serial com port.

    5. Click the Upload button.

    6. Browse to the directory with the data files. Click on your update file (*.dat where * is filename). Please note that you should have also next files in the same directory if you use *.dat file: *.ur1, *.ur2, *.ur3, *.ur4, *.ur5.

    7. Start the transfer going - should see progress bars indicating download OK.
    If this does not occur, then you may need to check the com port setting, cable etc.

    NB. If you are just updating the box with a .urt file, then in 6) above, change the files of type to *.urt.

    To DOWNLOAD software from box:

    1. You need a RS232 serial cross-over (Laplink) cable to connect PC to the Receiver.

    2. To download software from box, connect up serial cable and switch on the reciever WITH THE FRONT PANEL CH+ key pressed.
    LED display will display 'COPY'. Power off and repeat until it does, or check with a TV on the scart if no display.

    3. Unzip SerialTran35.zip into a convenient directory, also the update files.

    4. Double click serialtran35.exe, then Options/setup to define the reqd serial com port.

    5. Click the Download button.

    6. Browse to the directory and enter file name. Please note that SerialTran35 creates next files in directory *.dat, *.ur1, *.ur2, *.ur3, *.ur4, *.ur5.

    7. Start the transfer going - should see progress bars indicating download OK.
    If this does not occur, then you may need to check the com port setting, cable etc.

    WARNING:

    Please be sure that you do not receive ERROR message informing about LOST PACKETS.


    NOTICED PROBLEMS:

    We noticed problems when use SerialTran35 with Windows XP to extract software from a box on some laptop computers.
    E nevoie sa-ti traduc

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. axn mort
    By ekahl in forum DTH & Cable-Romania
    Replies: 1
    Last Post: 9th April 2006, 17:54
  2. AXN MAX MORT
    By piciul in forum DTH & Cable-Romania
    Replies: 1
    Last Post: 8th April 2006, 18:31
  3. PRO TV MORT
    By piciul in forum DTH & Cable-Romania
    Replies: 20
    Last Post: 23rd March 2006, 09:15
  4. TP 2 la MAX . mort!!
    By ady18 in forum DTH & Cable-Romania
    Replies: 3
    Last Post: 21st February 2006, 21:54
  5. M6 MORT?
    By kye04 in forum Placi DVB
    Replies: 3
    Last Post: 19th April 2005, 17:26

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top