Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 6 123 ... LastLast
Results 1 to 15 of 88
  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2006
    Location
    DUBAI
    Posts
    152
    Posts Thanks / Likes

    Default ZENEGA CD-1004iS


    It is worked fine. The problem is in that receiver all the polarities were changed to the next (i.e. VER to HOR: HOR to VER). So I did the stb to default factory reset. After default nothing displayed except the message 303.NOT INSTALLED No services installed, please install your set-top box by pressing OK.

    After getting channel search

    Installation failed. verify if your set-top box is properly connected to the dish. Then press OK retry.

    The STB has bought and activated from India. When connected to the dish, some channels came. Here in UAE I connected to the 3' dish. If I get connected to 6 ' dish I could get good signal? I found with the transponders that the polarities were changed. So I want to make the polarities correct. Then I made factory default. But now it is showing nothing but 303 not installed. The menu also not working.
    Thank you

    Can I upgrade this one by the same model using RS232?
    What to do . Please guide me. This is not my set top box.

  2. #2
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Dec 2004
    Posts
    17
    Posts Thanks / Likes

    Default

    ZENEGA 1004iS is the worst receiver we have found which came from India.
    KAON IS THE BEST ONE AVAILABLE.

  3. #3
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Dec 2004
    Posts
    17
    Posts Thanks / Likes

    Default ZENEGA CD1004iS

    Dear skycom
    DISH TV in Abu dhabi is having a problem with signal strength.
    In all the other emirates you can eaisly get the DISHTV on 3 1/2 feet dish.
    Last week i had a chance to see two receivers of different models
    ZENEGA CD1004iS & KAON KSCi260NCO connected to same dish with dual pole LNB in Dubai
    On Zenega most of the channels the signal strength is below 30% on KAON the signal strenth is above 50%.

    This Zenega Receiver is very good in India but it is the worst one for UAE.
    I saw 3 receivers of the same model. All are not working.
    2 Zenega receivers are connected on a 4 feet dish. and one fo them on a 3 1/2 feet.

    I am using a ZENEGA CD1004S (older model) it has a problem with signal quality. The technicain in India told me it can be a problem with the tuner of the receiver.

    So my personal advise to all the people who are going to buy DISHTV is to buy KAON receiver; never buy this ZENEGA CD1004iS for UAE

    Kindly tell me if i am wrong.

  4. #4
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2005
    Posts
    27
    Posts Thanks / Likes

    Default

    Hey kshibu

    I think u r right,the same problems here but u can improve the signal level with some good quality cable n lnb like lemoun and fuji.
    cable is important also,try original cable.

    Thank you

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2006
    Location
    DUBAI
    Posts
    152
    Posts Thanks / Likes

    Default

    If I connect to 6' dish, could I get signal the desired?
    6' dish which one we use for C band LNBs.
    Thanking you

  6. #6
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Dec 2004
    Posts
    17
    Posts Thanks / Likes

    Default

    Hi cableguy323
    Usually i used to connect the dish and tune everything. But this time i thought i will call a technical guy who is working in a very good company. We got some branded cables. So i think my cables are OK.
    Still my signal strength is low.
    Today i talked to one person and he told me to try EUROSTAR P10 HG (HighGain) LNB. But it is not availble now in Abu Dhabi. I am searching for it. OR INVACOM LNB which is almost 5 times costly than ordinay LNB. Both are not available. Let me try to get one of them. And i will share my experience.

    Thanks dear for your valuable suggestion + experience..

  7. #7
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Jun 2004
    Location
    13 Degrees North of Nowhere
    Posts
    62
    Posts Thanks / Likes

    Default Dish Tv Signal

    Friends
    I ahve been using zenega cd1005s in UAE which is perfect.
    But you need to use good quality 100cm dish.
    WATCH PORNO
    ENJOY LIFE

  8. #8
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Nov 2006
    Posts
    2
    Posts Thanks / Likes

    Default

    can any body tell me from where i can get dish tv india in dubai,U.A.E

  9. #9
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jul 2006
    Posts
    149
    Posts Thanks / Likes

    Default

    please post in this link about dishtv

    http://www.********.com/f2/viewtopic....9d8c04f2e9c5e6

  10. #10
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Dec 2006
    Location
    Dubai
    Posts
    1
    Posts Thanks / Likes

    Default

    Hi,
    I am facing a funny problem. We have installed dish antenna for Dish TV with dual LNB and connected to two rooms. We have two Zenega receivers, one is CD 1004 S and second is CD 1004 iS. The 1004 S works fine in both rooms but 1004 iS works at one location only. Can anyone help me on this?

  11. #11
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2006
    Location
    UN KNOWN
    Posts
    17
    Posts Thanks / Likes

    Default

    no body can give the solution about zenaga reciver


    which lnb is best for it

  12. #12
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2004
    Posts
    108
    Posts Thanks / Likes

    Default Starnge salution

    Dear brother.

    All who have ZENEGA CD-1004iS in UAE. There is signal problem so many people not getting all channels. I had a same problem then i did some experiment and succed.
    The trick is put one two way splitter. The wire which is coming from the dish connect input of the spilitter and use any one output of the spiltter to connect the receiver. U will get all channels and good signal.
    I did this with two receiver which is not getting ZEE telugu and MAA tv after that i got evry thing.
    Try it and then let me know. U will amaze.

    Thanks and enjoy.

  13. #13
    Junior Member Teacher
    Join Date
    Mar 2004
    Posts
    227
    Posts Thanks / Likes

    Default

    i like zenega as zenega is fast in booting and changing channels then Kaon ...

  14. #14
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    360
    Posts
    144
    Posts Thanks / Likes

    Default

    rajadada

    i am planning to buy DishTV Zenega CD-1004is receiver cause this is what is only available in the area i stay even KAON i260mco is not available here. So could someone confirm this splitter idea works on Zenega CD-1004is model number is UAE.

    Thanks
    Dream-Multimedia 7020S

    Nilesat 101/102-Atlantic Bird 4,
    Badr C,3 & 4,
    Hotbird 6,7A & 8,
    NSS-6,
    Insat 4A &
    Insat 4B

  15. #15
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2004
    Posts
    108
    Posts Thanks / Likes

    Default


    Dear ravimxb:

    I check my self in two receivers.
    But fix at least 100 cm dish if more bigger that's very good.

    Thanks and best regards.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. ZENEGA CD-1005S
    By harshan in forum RDI - English
    Replies: 1
    Last Post: 20th December 2006, 21:16
  2. please zenega cd-1004s information
    By geo_sadiq in forum RDI - English
    Replies: 0
    Last Post: 6th December 2006, 17:23
  3. Zenega CD-1004S
    By godfrey in forum RDI - English
    Replies: 1
    Last Post: 30th September 2006, 03:31
  4. Cable for Zenega STB
    By cmehta in forum RDI - English
    Replies: 1
    Last Post: 30th August 2006, 18:31
  5. Zenega
    By david161 in forum RDI - English
    Replies: 3
    Last Post: 29th June 2006, 19:48

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top