Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 5 of 5

Thread: t-rex 4.6

  1. #1
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2006
    Location
    England
    Posts
    10
    Posts Thanks / Likes

    Default t-rex 4.6


    Hi I have a t-rex 4.6 cam
    When i try to load it with a fun7 loader card that came with the t-rex cam i have a problem
    I am using a programer that i have had for a while and there is a drop down menu on the righ saying.
    ex ee And when i click that i get
    24c00 24c01 and up to 24c1024, 2x24c1024
    Below that there is a n other menu saying LOADER
    ADteknik loader or SDA/scl
    I have put the fun7loader.hex in flash memory
    In internal eeprom PREDASAUR 2**
    IN externalPRom PREDESAUR 2**
    At the bottom it says ATMEL CHIP 9058515 succesfully loaded but when i put it in my xreeem reciever i get
    Card does not contain a valid imaje
    select me when loader card in
    HELP please
    Hushy

  2. #2
    Junior Member Friend
    Join Date
    Jan 1970
    Location
    United Kingdom
    Posts
    11
    Posts Thanks / Likes

    Default

    I don't know what programmer you are using but I use an infinity usb. load flash and load only to external eeprom and reverse span if required

  3. #3
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2006
    Location
    England
    Posts
    10
    Posts Thanks / Likes

    Default programmer

    I am using teknik multiprogrammerversion 3.5 990903 its on to com port1
    and has to have a battery in it presumably to power it up as it is not usb.
    And i am using bannana software to run the multi programmer
    What i was not sure about is the size
    Is a FUN7 card to big as i get theimpresion thatthe drop down menu at the leftWhere it says exeee then when you click a dropdown menu appears which has 24c001--up to24c1024 then 2x 24c1024
    is that the spce on the fun card as i am under the impresion fun 1 fun2 etc get bigger.
    Hope sone one can explain then we newbbies will learn from it.
    regards hushy

  4. #4
    Junior Member Friend
    Join Date
    Jan 1970
    Location
    United Kingdom
    Posts
    11
    Posts Thanks / Likes

    Default

    Funcard 7 has the largest memory at 2x24c1024 which is why you reverse span the eeprom file so you can load all the file on one card. If you used a funcard 6 you would have to load 2 cards as it has 24c1024 memory (ie. half the memory). The lower the numbered funcard the smaller the memory. I hope this explains it well enough hushy.

  5. #5
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2006
    Location
    England
    Posts
    10
    Posts Thanks / Likes

    Default


    Hi thanks a million I have got loader to work now just have to find the right files to wach the footies any help wold be gratfull.
    Thanks again for explaining the card.
    Hushy

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top