Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 15 of 15
  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2003
    Location
    Romanica
    Posts
    338
    Posts Thanks / Likes

    Default Exista vreun ghid pt instalare Gbox in D500 ?

    Exista vreun ghid pt instalare Gbox in Dream 500 si Dream 7025 ?

    Mersi

  2. #2
    Banned
    RDI - Board Banned Avatar

    Join Date
    Apr 2003
    Posts
    28
    Posts Thanks / Likes

    Default

    stavros
    Teacher

    Joined: 19 Sep 2003

    Inca nu ai aflat ca este o sectiune numita Dreambox&DBoxII pe forum ?

    Mutat >>>>

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2003
    Location
    Romanica
    Posts
    338
    Posts Thanks / Likes

    Default

    Ei , acum am aflat . Banuiesc ca trebuie sa caut aici , asa-i ?

  4. #4
    ER' MEJO Moderator - Expert
    Join Date
    Apr 2005
    Location
    CAPUT MUNDI
    Posts
    2,094
    Posts Thanks / Likes

    Default Re: Exista vreun ghid pt instalare Gbox in D500 ?

    Quote Originally Posted by stavros
    Exista vreun ghid pt instalare Gbox in Dream 500 si Dream 7025 ?

    Mersi
    nu exista,pt ca fiecare imagine are modul ei pt a instala gbox.
    si plus de asta iti trebuie script pt fiecare imagine in parte

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2003
    Location
    Romanica
    Posts
    338
    Posts Thanks / Likes

    Default

    Inteleg, deci Gbox pina la urma , dupa cum suna mesajul de mai sus este numai pentru ..... ,,alesi,,. Daca am ajuns pina aici , e de rau .

  6. #6
    ER' MEJO Moderator - Expert
    Join Date
    Apr 2005
    Location
    CAPUT MUNDI
    Posts
    2,094
    Posts Thanks / Likes

    Default

    Quote Originally Posted by stavros
    Inteleg, deci Gbox pina la urma , dupa cum suna mesajul de mai sus este numai pentru ..... ,,alesi,,. Daca am ajuns pina aici , e de rau .
    men ai inteles gresit.fiecare imagine are gboxul ei.pentru ca scripturile nu sunt la fel.fiecare team are scriptul sau.si daca bagi la mana nu iti porneste.
    asa ca zi ce imagine folosesti si este mai usor de gasit gbox asa

  7. #7
    Plictisit Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2006
    Posts
    320
    Posts Thanks / Likes

    Default

    Ptr Gemini pe DM500:

    copiezi fisierele in:

    /var/bin/gbox -pui attrib 755
    /var/script/gbox_cam.sh -pui attrib 755
    /var/bin/s2issuer.b
    /var/bin/s2provid.b
    /var/keys/conax
    /var/keys/cwshare.cfg
    /var/keys/gbox_cfg
    /var/keys/ignore.list
    /var/keys/******
    /var/keys/knowns.ini
    /var/keys/nagra
    /var/keys/nds
    /var/keys/seca
    /var/keys/softcam.cfg
    /var/keys/via

    cam asa arata cwshare.cfg

    # allow maximum 04 share level for recieved card data
    I: { 04 }

    # 01 repeat EMM's
    # 00 consider every EMM only once
    # 01 restart pid on overflow
    # 1* reset ENX on every channel change
    # *1 check/reset ENX freezes on FTA
    # *2 check/reset ENX freezes on PayTV
    # *3 check/reset ENX freezes on FTA and PayTV
    # 00 write nothing in atack.txt
    # 01 write into atack.txt: password is wrong
    # 02 write into atack.txt: ID unknown
    # 04 write into atack.txt: IP is wrong
    # 08 write into atack.txt: port is worng
    # 10 write into atack.txt: share.stat
    # 20 create online.log for online/offline logging
    # 3F write everything. (combine bits for other combinations)
    # 4000 send ecm again after 4 Seconds if no reply.
    # 6000 resync decode after 6 Seconds if net decode failed
    N: { 00 01 03 1F 4000 6000 }

    # Send ECM's at maximum 5 cards (please use this as default)
    X: { 05 }

    # Send ECM's in any case to these card ID's, even they are more then X:
    # some examples ...
    #G: { 17020000 1234 }
    #G: { 0B000000 ABCD }
    #G: { 05021510 AB34 }
    #G: { 0D03A000 A234 }


    # For W: please read the cwshare.txt, here only some examples
    # use card 1 only for the following pids
    #W: { 01 02 02 } 1022 100A 100B 102B 1009 101D 1029 1014 1011 101B
    # don't use card 2 for the following pids
    #W: { 02 03 03 } 1008 1016

    # S: is the same as W:, just using the SID instead of the ECMPID

    # cwshare.cfg --- dbox1 --- Internet und Lokales Netzt
    #
    # password
    M: { mydbox2.homeip.net { AA242456 }}

    # Internet Friends port range password cod
    D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
    D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}

    # other local boxes
    D: { 192.168.0.51 { 8020 8020 { AB333441 { 5 5 }}}}
    D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}

    si asa arata gbox_cfg

    # gbox config file

    # Trace/Debug
    # xx yz ; xx=00 no konsole output
    # xx yz ; xx=01 konsole output
    # xx yz ; y=0 debug output (don't use)
    # xx yz ; y=1 no debug output
    # xx yz ; z=0 ouput to konsole
    # xx yz ; z=1 output to /var/tmp/debug.txt
    # xx yz ; z=2 Output to UDP (to capture with gboxt)
    Z: { 01 10 } 192.168.1.29 8024

    # Task type
    # 00 ** normal mode gbox mode (no season, use Multicam instead)
    # 01 ** Season Emulation in a ****** allcam chid 0602 nonZ
    # 10 ** Season Emulation in a ****** allcam chid 1702 nonZ
    # 11 ** Season Emulation in a ****** allcam chid 1702 Z
    # 12 ** Season Emulation in a ****** allcam chid 1722 Z
    # 13 ** Season Emulation in a ****** allcam chid 1762 Z
    # ** *1 Com port to use for season emulatiom (1 or 2)
    # ** 0* Use CTS fr RST detection
    # ** 1* Use DCD fr RST detection
    # ** ** 9600 = Baudrate to be used (working only on dbox2)
    W: { 00 00 } 9600

    # gbox working mode
    # 00 pure Emu
    # 01 pure SoftCam (when card inside), Emu (when no card inside)
    # 02 pure Net Client
    # 03 Mixed mode !!!!! always use this !!!!!
    G: { 03 }

    # Display ECM messages on Konsole
    # 00 don't show any ECM's
    # 01 show only valid ECM's
    # 02 show valid and bad ECM's with complete data display
    C: { 00 }

    # Display EMM messages on Konsole
    # *0 don't show any EMM's
    # *1 show only valid EMM's
    # *2 show valid and bad EMM's with complete data display
    # 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
    M: { 00 }

    # AutoUpdate
    # 00 is ignored (default)
    # 01 enable AU
    # 02 Auto AU !!!!! always use this !!!!!
    A: { 02 }

    # Key update
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    U: { 01 }

    # Hash pids
    # 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
    # 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
    H: { 01 }

    # Key files folder
    # 00 keyfiles in /var/keys
    # 01 keyfiles in /var/tmp
    T: { 01 }

    # On Screen Display for the Multysystemcam on com1/com2
    # 00 No OSD (default)
    # 01 display Smartcard messages in Neutrino
    # 02 display Smartcard messages in Neutrino new nhttpd format
    # 03 display Smartcard messages in Enigma
    # mypass (use user=root and pass=mypass for nhttpd)
    O: { 01 } 192.168.1.51

    # Logger and NET-mode UDP port Init
    # 00 do not init UDP port
    # 01 Init UDP port for IP, port, UDP
    L: { 00 } 192.168.1.29 8017

    # demux, multicam/comport configuration
    # *x ** ; x = device nummber to be used (0= default)
    # D* ** ; force use of /proc/bus/gtx for cw write operations
    (in the dbox2 the gbox writes directly the CW's, 00 is the
    recommended mode ! No drivers are required) use D* ** ONLY if
    you have Problems. 0* ** should be prefered !!!
    # F* ** ; write CW's in both devices (used for PVR in STB04xxx devices)
    # ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
    # ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
    # ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
    # ** *z ; z=0001b (0x*1) use com1 as Multicam
    # ** *z ; z=0010b (0x*2) use com2 as Multicam
    # ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
    # ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
    # ** *z ; z=0100b (0x*4) invert CTS detection on com1
    # ** *z ; z=1000b (0x*8) invert CTS detection on com2
    # example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
    V: { 00 02 }

    # RS232 SSSP mode
    # x debug messages, 1=on, 0=off
    # y com port to use (0=none, 1=com1, 2=com2)
    R: { 00 }

    # ================================================== ===========================
    # extra options to override default seting in case you expirience Problems,
    # normaly these setings are not required.
    #
    # cpu, api, cw write method
    #
    # 00 auto
    # 01 80X86
    # 02 MPC823
    # 03 IBM STB04xxx
    # 00 auto
    # 01 ibm
    # 02 api2
    # 03 api3
    # 00 cw write style = use internal routine (only dbox2)
    # 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
    # 02 cw write style = CA_SET_DESCR type2
    # 03 cw write style = CA_SET_DESCR type3
    # 04 cw write style = 16 byte /proc/bus/gtx
    # 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
    # xx write cw in 1st device with index=xx
    # yy write cw in 2nd device with index=yy
    # 01 means with .index=0 (default)
    # 02 means with .index=1
    # 03 means with .index=0 and .index=1
    # .. any bitwise combination ...
    # FF means with all 8 indexes (0-7)
    #J: { 01 00 00 01 01 }

    # Files, folders, devices
    # folder/device comment
    #
    #F: { 01 } /var/tmp/pmt.tmp // pmt file
    #F: { 02 } /var/tmp/emm.info // key update log file
    #F: { 03 } /var/tmp/ecm.info // ecm info file
    #F: { 04 } /var/tmp/atack.txt // atack info file
    #F: { 11 } /var/keys // folder for config files
    #F: { 12 } /var/tmp // folder for temporary file
    #F: { 13 } /var/tmp // folder for keyfiles
    #F: { 21 } /dev/dvb/adapter0/ca0 // ca device
    #F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
    #F: { 23 } /dev/dvb/adapter0/demux0 // demux device
    #F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
    #F: { 41 } /dev/sci0 // STB04xxx slot1
    #F: { 42 } /dev/sci1 // STB04xxx slot1
    #F: { 43 } /dev/tts/0 // rs232 com1
    #F: { 44 } /dev/tts/1 // rs232 com2

    # For overclocking freaks, Clocking internal STB04xxx slots with:
    # 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
    # ****** works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
    # The Dream has not a clean clock signal, some cards that are sensitive will
    # refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
    # On other STB04xxx recievers the same cards work with 6.30MHz
    #
    #F: { 51 } 02 // ******
    #F: { 52 } 03 // seca
    #F: { 53 } 03 // viaccess
    #F: { 54 } 03 // nagra
    #F: { 55 } 03 // crypto
    #F: { 57 } 03 // conax
    #F: { 58 } 03 // nds

  8. #8
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2003
    Location
    Romanica
    Posts
    338
    Posts Thanks / Likes

    Default

    Ei asa da raspuns. Folosesc Gemini . De la mesajul de mai sus , mai lipseste ceapa si palinca si atunci chiar ca e mura in gura . Multumesc mult pentru ajutor la toti de la acest topic.

  9. #9
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,461
    Posts Thanks / Likes

    Default

    ptru 7025 am eu unul care il bagi in tmp si se instaleaza manual din telecomanda.
    daca te intereseaza da un mail unde sa il pun.
    350 kg de scule!

  10. #10
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2006
    Posts
    190
    Posts Thanks / Likes

    Default

    Iar daca folosesti o imagine bazata pe rudream cum e de exemplu 2gether
    pui in
    var/bin/gbox-drepturi 755
    iar in
    var/tuxbox/config/emulist.xml

    care arata cam asa:

    <?xml version="1.0" encoding="iso-8859-1" ?>

    <emulist>
    <emu text="Common Interface" name="ci" emudemon="" emuextra="" emuhelper="" />
    <emu text="DreamCrypt" name="dccamd" emudemon="/bin/dccamd" emuextra="" emuhelper="" />
    <emu text="Scam 2.5 (050616)" name="scam" emudemon="/var/bin/scam" emuextra="" emuhelper="" />
    <emu text="Camd3 v3.869" name="camd3" emudemon="/var/bin/camd3" emuextra="" emuhelper="camd3c" />
    <emu text="Mgcamd v1pre12" name="mgcamd" emudemon="/var/bin/mgcamd" emuextra="" emuhelper="mgcamdc" />
    <emu text="Evocamd v2.11" name="evocamd" emudemon="/var/bin/evocamd" emuextra="" emuhelper="evocamdc" />
    <emu text="Newcamd v6.10" name="newcamd" emudemon="/var/bin/newcamd" emuextra="" emuhelper="newcamdc" />
    <emu text="gbox v2.25b" name="gbox" emudemon="/var/bin/gbox" emuextra="" emuhelper="gboxc" />
    </emulist>

    iar keyle la fel ca si la celelalte imagini in var/keys pui fisierele necesare

  11. #11
    Junior Member Teacher
    Join Date
    Oct 2003
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default

    Quote Originally Posted by gogi
    ptru 7025 am eu unul care il bagi in tmp si se instaleaza manual din telecomanda.
    daca te intereseaza da un mail unde sa il pun.
    Are cineva unul pt. DB 7000 cu imagine Gemini

  12. #12
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    Quote Originally Posted by johst
    Quote Originally Posted by gogi
    ptru 7025 am eu unul care il bagi in tmp si se instaleaza manual din telecomanda.
    daca te intereseaza da un mail unde sa il pun.
    Are cineva unul pt. DB 7000 cu imagine Gemini
    Gbox pentru dreambox 7000 cu imagine Gemini nu este inca dar daca
    vrei o img.Gemini pentru dreambox 7000 cu Gbox gasesti aici:
    http://www.croteam-sat.org/aploud/in...%20ZONE/IMAGES
    PS. In caz ca nu esti inregistrat pe croteam poti beneficia de bunavointa altora
    http://www.********.com/f2/viewtopic.php?t=73655

  13. #13
    Junior Member Teacher
    Join Date
    Oct 2003
    Location
    Romania
    Posts
    207
    Posts Thanks / Likes

    Default

    Merci
    Didi.

  14. #14
    Junior Member Teacher
    Join Date
    Jan 2006
    Location
    de-ro
    Posts
    287
    Posts Thanks / Likes

    Default

    s-ar putea rezolva ghebox si pt 7020

    ar fii o treaba :P
    Live-your-dream

    19/16/5/-1 @75

  15. #15
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2006
    Posts
    190
    Posts Thanks / Likes

    Default

    pai la 7020 e ca si al restu doar ca in loc de var/bin ai usr/bin,usr/key....blabla

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 10
    Last Post: 3rd October 2006, 18:56
  2. instalare gbox
    By aliat in forum DREAMBOX
    Replies: 2
    Last Post: 1st April 2006, 14:22
  3. Exista vreun emu ptr MTV-uri+VH1 pe Astra16E?
    By strongman1960 in forum Placi DVB
    Replies: 16
    Last Post: 14th September 2005, 11:48
  4. Garantie pe instalare antena exista?
    By cristi in forum DTH & Cable-Romania
    Replies: 6
    Last Post: 16th March 2005, 13:05
  5. Replies: 6
    Last Post: 4th February 2004, 20:08

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top