Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 12 of 12
  1. #1
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default ANGELBOX USING W3 & W6 AS SLAVE


    I WANT TO ASK IF ANYBODY HAS TRIED THIS COMBINATION.
    HAMOOX HAS ASKED ON OTHER POSTINGS BUT NO REPLY.
    REASON ?
    ANGELBOX WAS PRODUCED BY DYNASAT IN THE CITY OF ANGELS (BANGKOK) HENCE ITS NAME. IT WAS MARKETED AND SOLD IN ASIA PACIFIC AND NOT ELSEWHERE. ITS SLAVE WAS ASIASAT 4.

    W3/W6 HAS FOOTPRINT OVER EUROPE AND MIDDLE / NEAR EAST
    SO NEVER THE TWAIN DID MEET !

    IF THE ANGELBOX AND MY DREAM MACHINE WERE BROUGHT TO SAY DUBAI , WOULD THEY WORK ON THE PACKAGES THERE ?

    DIFFICULT QUESTION AS RDI HAS THREE SETS OF READERS THOSE FROM EUROPE, THOSE FROM THE MIDDLE EAST AND THOSE FROM ASIA PACIFIC (WHICH INCLUDES AUSTRALASIA..)

  2. #2
    archer1260
    Guest
    RDI - Board Default Avatar

    Default

    i have the same question. is it possible to inter-change the software for these stuff ie dream maker, future, angelbox & etc.?

  3. #3
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Jun 2006
    Location
    Thailand
    Posts
    14
    Posts Thanks / Likes

    Default

    AGB and Hi-Tech 9500 have the same hardware. You can interchange their software for main and slave. But the code in software for decoding cable TV is unique. WorldBox 8 also interchange, but remote controller code is difference from AGB and HT 9500.
    With regard.

  4. #4
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default

    SO NO POINT IN BUYING UP ALL THE REDUNDANT ANGELBOXES AND SHIPPING THEM TO DUBAI.
    I BET DYNASAT HAVE A FEW THOUSAND THEY WANT TO DISPOSE OF !
    THEY WILL HAVE TO BUY ALL UNSOLD STOCK BACK FROM THEIR DEALERS ..........OR RISK A DRIVE- BY SHOOTING. [TIT IF YOU KNOW WHAT THAT MEANS]

  5. #5
    Moderator Expert
    Join Date
    Jan 2006
    Location
    Africa-Kenya-Nbi
    Posts
    3,108
    Posts Thanks / Likes

    Default Re: ANGELBOX USING W3 & W6 AS SLAVE

    Quote Originally Posted by C-BAND
    DIFFICULT QUESTION AS RDI HAS THREE SETS OF READERS THOSE FROM EUROPE, THOSE FROM THE MIDDLE EAST AND THOSE FROM ASIA PACIFIC (WHICH INCLUDES AUSTRALASIA..)

    And those from AFRICA
    Dstv HD PVR

  6. #6
    Junior Member Teacher
    Join Date
    Jan 2005
    Posts
    181
    Posts Thanks / Likes

    Default

    from the previous post I have mention that most of this receivers are compatible in software.thats why I ask of you if you are receiving w3 or w6 because its all of matter of slave software to get your receiver running this slave software are for free and I notice most of you are receiving some satellite in our **** print .As the question that if this software will work for you or not .well this receivers are sold too many country its not only in the middle east
    I just think that you should get use of the fact that you have already own the receiver
    And start looking the solution of your problem instead of complain its just keep going around to same subject and end up were you started


    thank you Mr C BND

  7. #7
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default

    MY FRIEND ..HAMOOX ...PLEASE UNDERSTAND
    WE CANNOT RECEIVE W3 AND W6 IN SE ASIA..ITS TOTALLY AND COMPLETELY OUT OF FOOTPRINT
    (21.3 Degrees East / 7 Degrees East )

  8. #8
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2004
    Posts
    49
    Posts Thanks / Likes

    Default Re W3, W6

    Hello C-BAND,

    Don't feel too bad about being out of the W3/W6 footprints - we are getting no data off them here in the ME.

    Just promises of "soon" - deja-vu?

    Regards, Delta.


    Quote Originally Posted by C-BAND
    MY FRIEND ..HAMOOX ...PLEASE UNDERSTAND
    WE CANNOT RECEIVE W3 AND W6 IN SE ASIA..ITS TOTALLY AND COMPLETELY OUT OF FOOTPRINT
    (21.3 Degrees East / 7 Degrees East )

  9. #9
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2004
    Posts
    49
    Posts Thanks / Likes

    Default

    Hey C-BAND,

    How's about you visit the manufacturers, and, rather than shoot them, "persuade" them to develop software for the boxes (and PC) that allows the boxes to work with Internet data sent from the PC on the serial port, just like an ordinary C/S unit ? (don't know what to do with the second tuner - if only it had AV outputs!)

    We don't need more doorstops in the ME !

    Regards, Delta


    Quote Originally Posted by C-BAND
    SO NO POINT IN BUYING UP ALL THE REDUNDANT ANGELBOXES AND SHIPPING THEM TO DUBAI.
    I BET DYNASAT HAVE A FEW THOUSAND THEY WANT TO DISPOSE OF !
    THEY WILL HAVE TO BUY ALL UNSOLD STOCK BACK FROM THEIR DEALERS ..........OR RISK A DRIVE- BY SHOOTING. [TIT IF YOU KNOW WHAT THAT MEANS]

  10. #10
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default

    DELTA..IT IS AMAZING WHAT YOU WRITE AS SIX MONTHS AGO A DEALER/IMPORTER EMAILED ME HE WAS DOING EXACTLY THAT.
    THIS MAN IS A MEMBER OF RDI BUT HAS BEEN SILENT RECENTLY.
    PLEASE CONTACT HIM . HIS NAME IS PAUL. DETAILS BELOW :
    SatService
    Duri
    INDONESIA
    Phone : +62-765-7037116
    Mobile : +628126829296
    Email :
    contact
    http://www.sat-service.tk/

    HOPEFULLY HIS CONVERSION SOFTWARE IS NOW READY

  11. #11
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2004
    Posts
    49
    Posts Thanks / Likes

    Default

    Hello C-BAND,

    Thanks for the info. bit no luck contacting SatService.

    I guess if somebody succeeds we will hear about it.

    Regards, Delta.

    Quote Originally Posted by C-BAND
    DELTA..IT IS AMAZING WHAT YOU WRITE AS SIX MONTHS AGO A DEALER/IMPORTER EMAILED ME HE WAS DOING EXACTLY THAT.
    THIS MAN IS A MEMBER OF RDI BUT HAS BEEN SILENT RECENTLY.
    PLEASE CONTACT HIM . HIS NAME IS PAUL. DETAILS BELOW :
    SatService
    Duri
    INDONESIA
    Phone : +62-765-7037116
    Mobile : +628126829296
    Email :
    contact
    http://www.sat-service.tk/

    HOPEFULLY HIS CONVERSION SOFTWARE IS NOW READY

  12. #12
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    THAILAND
    Posts
    1,437
    Posts Thanks / Likes

    Default


    HI DELTA,
    HEREWITH A COPY OF AN EMAIL HE SENT CONCERNING THIS MATTER

    " yes, now we work to open file bin matrixrevolution and angel box
    to maked server, if sharing card finish ,
    we are still ready with new firmware."

    AS HE IS AN OFFICIAL DEALER I THINK IT OK TO GIVE YOU HIS EMAIL ADDRESS
    [email protected]

    [WERE HIS EMAIL ADDRESS PRIVATE I WOULD NOT PUBLISH HIS ADDRESS OF COURSE ]

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Angelbox
    By weirdo in forum RDI - English
    Replies: 11
    Last Post: 31st August 2006, 01:47
  2. Replies: 6
    Last Post: 20th July 2006, 10:58
  3. Seagate-Master / Lexar-Slave
    By Minitechnikus in forum DREAMBOX
    Replies: 2
    Last Post: 30th May 2006, 07:57
  4. Angelbox and UBC
    By thaigreg in forum RDI - English
    Replies: 8
    Last Post: 30th May 2006, 01:11
  5. matrix revolution slave software
    By IPTV in forum RDI - English
    Replies: 1
    Last Post: 8th March 2006, 17:14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top