Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 12 of 12

Thread: Modul ******

  1. #1
    Senior Member Expert
    Join Date
    Dec 2003
    Location
    stadion Steaua
    Posts
    1,471
    Posts Thanks / Likes

    Default Modul ******

    Salutare la toti,am primit azi cadou un asemenea modul si as vrea sa stiu daca se poate reprograma l-am bagat in slot la lepi si imi cere dreiver.Exista asa ceva?Stiam ca merge doar cu funnuri si carduri originale.

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2006
    Posts
    412
    Posts Thanks / Likes

    Default

    sunt 2 modele,euro,cam si free cam primul nu poate fi modificat cel de-al doilea se poate.

  3. #3
    Senior Member Expert
    Join Date
    Dec 2003
    Location
    stadion Steaua
    Posts
    1,471
    Posts Thanks / Likes

    Default

    Si cum pot sa imi dau seama care cum este din moment ce nu scriie nimic din ce ai spus tu pe el?Exista doar o serie:Rev.1.1 F/W 0.07B
    mai sunt si altele scrise dar de acolo nu rezulta care ar fi de ex Eurocam.
    THX!

  4. #4
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Dec 2005
    Posts
    321
    Posts Thanks / Likes

    Default modul

    Ce poti decoda cu el? Ce canale?

  5. #5
    Senior Member Expert
    Join Date
    Dec 2003
    Location
    stadion Steaua
    Posts
    1,471
    Posts Thanks / Likes

    Default Re: modul

    Quote Originally Posted by dannic
    Ce poti decoda cu el? Ce canale?
    Nu am probat nimic,stiu ca merge cu 6 in 1.Problema mea este daca pot sa ii pun alt soft pe el.

  6. #6
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Sep 2004
    Posts
    39
    Posts Thanks / Likes

    Default

    daca decodeaza 6 in 1 e freecam.... potzi sa il faci doar allcam din el ....

  7. #7
    Ghost Man Expert
    Join Date
    Jan 2006
    Location
    RdVTR
    Posts
    1,137
    Posts Thanks / Likes

    Default

    Scrie pe el Eurocam undeva pe laterala dar nu foarte vizibil

    Fii atent cu el ca daca nu e free cam s-ar putea sa-l bulesti incercand sa-l reprog
    Stiu ca nu stiu nimic..!
    The Show Must Go On

  8. #8
    Senior Member Expert
    Join Date
    Dec 2003
    Location
    stadion Steaua
    Posts
    1,471
    Posts Thanks / Likes

    Default

    Deocamdata nu vrea lepul sa il recunoasca,am gasit un prog pt lepi
    Downloader 2.0 da cind il bag in slot sau nu il recunoaste sau imi cere un dreiver care nu am de unde sa il iau ,se numeste:PCMCIA MTD 0002.Am mai citit si pe alte forumuri si multi au avut asemenea probleme.

  9. #9
    Member Mentor
    Join Date
    Jan 1970
    Posts
    842
    Posts Thanks / Likes

    Default

    Quote Originally Posted by [email protected]
    Si cum pot sa imi dau seama care cum este din moment ce nu scriie nimic din ce ai spus tu pe el?Exista doar o serie:Rev.1.1 F/W 0.07B
    mai sunt si altele scrise dar de acolo nu rezulta care ar fi de ex Eurocam.
    THX!
    --este un irdeto4.7SE Poti sa-l transformi in freecam (daca nu este deja ? ) 2.020 este ultimul soft pt. acest modul . In plus fata de 2.018 stie sa citeasca cartea originala de Premiere si cartea neoriginala

  10. #10
    Senior Member Expert
    Join Date
    Dec 2003
    Location
    stadion Steaua
    Posts
    1,471
    Posts Thanks / Likes

    Default

    Quote Originally Posted by FLAVIUS
    Quote Originally Posted by [email protected]
    Si cum pot sa imi dau seama care cum este din moment ce nu scriie nimic din ce ai spus tu pe el?Exista doar o serie:Rev.1.1 F/W 0.07B
    mai sunt si altele scrise dar de acolo nu rezulta care ar fi de ex Eurocam.
    THX!
    --este un irdeto4.7SE Poti sa-l transformi in freecam (daca nu este deja ? ) 2.020 este ultimul soft pt. acest modul . In plus fata de 2.018 stie sa citeasca cartea originala de Premiere si cartea neoriginala
    Se programeaza cuownloader 2.0 ?

  11. #11
    Member Mentor
    Join Date
    Jan 1970
    Posts
    842
    Posts Thanks / Likes

    Default

    History:
    FreeCAM2-010: Initial public release.
    FreeCAM2-011: Fixed a bug in the $0328D6 routine which also existed in FreeCAM1. Channel switching is now faster.
    FreeCAM2-012: Fixed a bug that caused some receivers not to support D-Cards (e.g. Mediavision).
    FreeCAM2-013: Returned to original routine at $030064.
    FreeCAM2-014: Fixed a bug that could destroy EEPROM contents when turning emulator off and switching between Mode GER and INT. Added support for GER, INT, XNT, TEL and AUTO Modes. In Version 014 only use AUTO (all other modes do not work). There is another bug (left from FreeCAM1) which can eventually destroy a smart card EEPROM contents when the EMU is on (sends 01 FF nanos, don't know why). So do not insert a card that supports EEPROM writing, when the EMU is on. I will work on a fix in 015.
    FreeCAM2-015: FreeCAM in emulator mode no longer destroys smartcard. You can now switch the emulator on without the need to go to a 0602 channel before. Enhanced support for Non-******/BetaCrypt ECMs.
    FreeCAM2-016: Fixed a bug which caused CA_System_ID 1722 not to work (Mediavision Bouquet affected).
    FreeCAM2-017: Allow 4711 before the CA_System_ID to deactivate CAMCRYPT. This allows certain Goldwafers (Alfredo) to run.
    FreeCAM2-018: Added support for preferred providers in Viaccess and Seca. For more details see the the FAQ/Prefered providers section below. Added support for dumping the CA_PMT. Set this to OFF, if you don't know what this means. Makes only sense to turn it on with an emulator which can interpret this (e.g. HBEMU).
    FreeCAM2-019: Added support for TPScrypt. Disabled printing of error messages like "NVRAM/FILTER ERROR", but the problem still exists - see the Bugs section below. Added multiple EMM support. Now it is possible to receive EMMs for two different CA_System_IDs simultaneous. The two CA_System_IDs are: the one from the card and the default Irdeto1 ID - 0602.
    FreeCAM2-020: Added support for Z-/x02-cards.

    top of page


    --------------------------------------------------------------------------------

    Installation:
    Requirements:
    OS: Win95, Win98 or WinME
    Drivers: IRDETO95.INF/IRDETO98.INF
    Software: IRD106.EXE or XALOAD.EXE
    Installation using XALOAD.EXE
    Unzip all files to a directory of your choice (e.g. C:\FREECAM).
    If you run Win95 (non OSR2) delete Irdeto98.inf.
    If you run Win95 OSR2, Win98 or WinME delete Irdeto95.inf.
    If you run WinNT, Win2000 or WinXP, it won't work.
    Insert the CI-Cam into the PCMCIA slot. When windows asks you for a driver directory point to C:\FREECAM.
    Start the MS-DOS command line. Go to C:\FREECAM and run "XALOAD.EXE F2-B020.BIN".
    Installation using IRD106.EXE
    Unzip all files to a directory of your choice (e.g. C:\FREECAM).
    If you run Win95 (non OSR2) delete Irdeto98.inf.
    If you run Win95 OSR2, Win98 or WinME delete Irdeto95.inf.
    If you run WinNT, Win2000 or WinXP, it won't work.
    Insert the CI-Cam into the PCMCIA slot. When windows asks you for a driver directory point to C:\FREECAM.
    Edit IRD106.INI and change the BINARY entry to Binary=F2-B020.BIN.
    Copy IRD106.INI from C:\FREECAM to windows directory (e.g. C:\WINDOWS).
    Run IRD106.EXE. Press the START button.
    top of page


    --------------------------------------------------------------------------------

    FAQ:
    Goodies menu:
    DEBUG (on / off): OFF (default): sending of debug messages is switched off. ON: CA_PMT is sent to cardslot, "01 5A 00 00 01 length ca_pmt". ON is not useful if you don't know how to read the CA_PMT. This option does not open any extra channels.
    ECM: This setting has 2 different functions:

    cam sends the selected list of CA_System_IDs and the CA_System_ID from the card to the receiver. This way cam tells the receiver which systems it supports. This function is only in effect on receivers which prefilter the CA_PMT (Technisat, Humax). On receivers which give the complete PMT to the CI (Nokia, Galaxis, Hauppauge/Technotrend DVBs) it has no effect.
    the selected set of CA_System_IDs is used to find the ECM-PID. The cam checks if ECM-PIDs for one of the CA_System_IDs are in the CA_PMT and selects them. The order of the CA_System_IDs in the list defines their priority. The highest priority has the CA_System_ID from the card, followed by the CA_system_IDs from the list, from left to right. This function is independent of used receiver.
    BS/I/V/S/N (default) 1702 1762 0602 0500 0100 1800
    BA/I/V/S/N 1762 1702 0602 0500 0100 1800
    BK/I/V/S/N 1722 1762 0602 0500 0100 1800
    ****** 1762 0602 0604 0606 0608 0622
    I/V/S/CO/N 1762 0602 0500 0100 0B00 1800
    I/CR/V/NA 0602 0D00 0D03 0D05 0500 1801
    Seca/Via 1702 1762 0602 0100 0500 1800
    Via/Seca 1702 1762 0602 0500 0100 1800

    I=******, BS=BetaCrypt-S, BA=BetaCrypt-A, BK=BetaCrypt-K, S=Seca, V=Viaccess, N=Nagra, NA=Nagra-Aladin, CO=Conax, CR=Cryptoworks

    You can edit the menu text and CA_System_IDs: text at $37F00, CA_System_IDs at $37F80 or use a FreeCam editor like FCEdit.

    EMU (on / off): OFF: use card or emu to decode. ON: internal Irdeto1/BetaCrypt1 emulator is used.
    TPScrypt (on / off): OFF: cam does not decrypt TPScrypted Viaccess ECMs. ON: cam decrypts TPScrypted Viaccess ECMs and sends them plain to the card.

    Prefered providers:
    It is possible to define a list of so-called "prefered" providers for Viaccess and Seca. These are 10 byte long strings which consist of 4 or 2 provider idents, depending on the System. These strings have the following format (all values in hexadecimal notation):

    53 45 aa aa bb bb cc cc dd dd for Seca: space for 4 idents each 2 byte long.
    56 49 xx xx x0 yy yy y0 00 00 for Viaccess: space for 2 idents each 3 byte long, the last 2 byte are not used.

    You can enter these strings in the same way as PlainKeys. Either with your remote control in the Key menu or at $3A000 in the bin file. It is wise to enter only the idents you have keys for. Multiple entries are allowed.

    example Seca:

    53 45 00 19 00 03 00 10 00 00 53 45 = SEca ident string
    00 19 = ident for Canal+ Digitaal
    00 03 = ident for Canal+ France
    00 10 = ident for D+
    00 00 = empty entry

    example Viaccess:

    56 49 00 78 00 00 7C 00 00 00 56 49 = VIaccess ident string
    00 78 00 = ident for CSN France
    00 7C 00 = ident for TPS France
    00 00 = not used, always 00 00

    Multiple EMMs:
    It is possible to receive EMMs for two different CA_System_IDs. The first CA_System_ID is 0602 (default Irdeto1 ID). If it is in the CAT, it is activated. The second CA_System_ID is defined by the card. Example: if you set your card to 1702 you will be able to receive EMMs for 0602 and 1702.


    sper sa te ajute cu ceva Eu nu l-am facut inca , nu am laptop si vreau sa incerc pe un PC cu Win 98SE si cu PCMCIA slot ...sper sa mearga

  12. #12
    Senior Member Expert
    Join Date
    Dec 2003
    Location
    stadion Steaua
    Posts
    1,471
    Posts Thanks / Likes

    Default

    Multumest fff mult.O sa caut discheta de start pt wind.98.Cd-ul il am dar nu am discheta de start.O ai tu cumva?Daca o ai pune-o pe rapidshare.THX!

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. @FANTA Info modul CryptoWorks by ******
    By claudiuw in forum RDI - Satelit
    Replies: 6
    Last Post: 6th November 2006, 23:49
  2. ce poate Modul Fre cam 2.018 ?
    By giolgau in forum SD Receivers
    Replies: 1
    Last Post: 15th June 2006, 00:38
  3. MODUL MATRIX
    By monalisa in forum RDI - Satelit
    Replies: 3
    Last Post: 31st May 2006, 21:39
  4. Kryptowork Modul
    By niketm in forum Shop
    Replies: 0
    Last Post: 11th May 2005, 12:37
  5. dth cu modul ?
    By tranceboy in forum DTH & Cable-Romania
    Replies: 25
    Last Post: 13th March 2005, 20:13

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top