Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 5 of 5
  1. #1
    Alone_Moody
    Guest
    RDI - Board Default Avatar

    Default Neosat SX 9800i & SX 9800i-s


    What is the Difference Neosat SX 9800i & SX 9800i-s

    Neosat SX 9800i-s Main Features

    Memory
    Main Processor : NEC UPD61120 (32bit @ 187MHZ)
    Flash Memory : 2 Mbyte
    Program DRAM : 16 Mbyte

    120 Programmable satellites \ 6,000 Programmable channels
    950-2150 Mhz IF range
    2 Slot Common Interface
    MCPC/SCPC, C/KU reception
    Fully MPEG 2 / DVB compliant
    1 LNB input, IF loop through for 2nd receiver
    Variable input symbol rate 1 ~45Msps
    Oscilloscope / spectrum analyzer function for easy signal detection
    Easy auto satellite program searching
    Manual PID scan function
    Picture-In-Graphics function
    Multi-Picture(4,6,9,10,13, or 16 pictures) function
    Zoom. Audio Spectrum. Screen Saver
    Multi launguage menu
    Electronic Program Guide
    8 favorite channel group selection / parental lock
    Auto NTSC / PAL switching
    Teletext supported by OSD and VBI
    RS 232 doenloading
    Data transfar /' receiver-to-receiver and / or PC-to- receiver
    DiSEqC version 1.2/1.3 supported
    14/18V LNB switching / 22KHz on/off
    1SCART connector, 4 RCA (1 Video, 2 Audio L/R, 0/12V)
    PLL RF modulator UHF Ch. 21 ~ 69 (NTSC M, PAL G/I/K)
    Input power : 100-250V ~ 50 / 60Hz Max, 25W
    Dimensions : 340 * 240 * 60mm


  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2004
    Location
    ML
    Posts
    270
    Posts Thanks / Likes

    Default hello

    wr is S on the front i have same STB with same Function but it is sx9800i there is not -s- on it

  3. #3
    Alone_Moody
    Guest
    RDI - Board Default Avatar

    Default

    SX 9800i have don't back side POWER SWITCH.
    SX 9800i-s have back side POWER SWITCH.

    if ur receiver don't have back side POWER SWITCH ur receiver
    SX 9800i & this model support SX 9800i software not SX 9800i-s.


    my receiver have back side power switch but in front show model
    SX 9800i but this model support SX 9800i-s software not SX 9800i.

    same like FORTECSTAR 5100Plus & 5100Plus+.
    5100Plus don't have back side Power Switch.5100Plus+ have Power
    Switch back side.

    i want only this information SX 9800i & SX 9800i-S same technical
    facility.


    SX 9800i-s Memory
    Main Processor : NEC UPD61120 (32bit @ 187MHZ)
    Flash Memory : 2 Mbyte
    Program DRAM : 16 Mbyte

    120 Programmable satellites \ 6,000 Programmable channels
    950-2150 Mhz IF range
    2 Slot Common Interface
    MCPC/SCPC, C/KU reception
    Fully MPEG 2 / DVB compliant
    1 LNB input, IF loop through for 2nd receiver
    Variable input symbol rate 1 ~45Msps
    Oscilloscope / spectrum analyzer function for easy signal detection
    Easy auto satellite program searching
    Manual PID scan function
    Picture-In-Graphics function
    Multi-Picture(4,6,9,10,13, or 16 pictures) function
    Zoom. Audio Spectrum. Screen Saver
    Multi launguage menu
    Electronic Program Guide
    8 favorite channel group selection / parental lock
    Auto NTSC / PAL switching
    Teletext supported by OSD and VBI
    RS 232 doenloading
    Data transfar /' receiver-to-receiver and / or PC-to- receiver
    DiSEqC version 1.2/1.3 supported
    14/18V LNB switching / 22KHz on/off
    1SCART connector, 4 RCA (1 Video, 2 Audio L/R, 0/12V)
    PLL RF modulator UHF Ch. 21 ~ 69 (NTSC M, PAL G/I/K)
    Input power : 100-250V ~ 50 / 60Hz Max, 25W
    Dimensions : 340 * 240 * 60mm

  4. #4
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2004
    Location
    ML
    Posts
    270
    Posts Thanks / Likes

    Default tnx

    TNX for up2dating info of SX 9800i-s


    Quote Originally Posted by Alone_Moody
    SX 9800i have don't back side POWER SWITCH.
    SX 9800i-s have back side POWER SWITCH.

    if ur receiver don't have back side POWER SWITCH ur receiver
    SX 9800i & this model support SX 9800i software not SX 9800i-s.


    my receiver have back side power switch but in front show model
    SX 9800i but this model support SX 9800i-s software not SX 9800i.

    same like FORTECSTAR 5100Plus & 5100Plus+.
    5100Plus don't have back side Power Switch.5100Plus+ have Power
    Switch back side.

    i want only this information SX 9800i & SX 9800i-S same technical
    facility.


    SX 9800i-s Memory
    Main Processor : NEC UPD61120 (32bit @ 187MHZ)
    Flash Memory : 2 Mbyte
    Program DRAM : 16 Mbyte

    120 Programmable satellites \ 6,000 Programmable channels
    950-2150 Mhz IF range
    2 Slot Common Interface
    MCPC/SCPC, C/KU reception
    Fully MPEG 2 / DVB compliant
    1 LNB input, IF loop through for 2nd receiver
    Variable input symbol rate 1 ~45Msps
    Oscilloscope / spectrum analyzer function for easy signal detection
    Easy auto satellite program searching
    Manual PID scan function
    Picture-In-Graphics function
    Multi-Picture(4,6,9,10,13, or 16 pictures) function
    Zoom. Audio Spectrum. Screen Saver
    Multi launguage menu
    Electronic Program Guide
    8 favorite channel group selection / parental lock
    Auto NTSC / PAL switching
    Teletext supported by OSD and VBI
    RS 232 doenloading
    Data transfar /' receiver-to-receiver and / or PC-to- receiver
    DiSEqC version 1.2/1.3 supported
    14/18V LNB switching / 22KHz on/off
    1SCART connector, 4 RCA (1 Video, 2 Audio L/R, 0/12V)
    PLL RF modulator UHF Ch. 21 ~ 69 (NTSC M, PAL G/I/K)
    Input power : 100-250V ~ 50 / 60Hz Max, 25W
    Dimensions : 340 * 240 * 60mm

  5. #5
    Alone_Moody
    Guest
    RDI - Board Default Avatar

    Default


    thx

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. neosat 9800i-s
    By majid0607 in forum RDI - English
    Replies: 0
    Last Post: 29th October 2006, 16:20
  2. neosat 9800i
    By yajimaji in forum RDI - English
    Replies: 1
    Last Post: 30th August 2006, 03:32
  3. Neosat 9800i
    By kamran in forum RDI - English
    Replies: 0
    Last Post: 9th February 2006, 10:06
  4. Neosat 9800i
    By aneelshahid in forum RDI - English
    Replies: 2
    Last Post: 17th July 2005, 19:18
  5. help me for neosat 9800i
    By jameel in forum RDI - English
    Replies: 1
    Last Post: 28th May 2005, 21:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top