Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 8 of 8
  1. #1
    Junior Member Teacher
    Join Date
    Jan 1970
    Location
    Morocco
    Posts
    291
    Posts Thanks / Likes

    Default Reparare Humax > Iasi

    Stie cineva un reparator de receivere Humax 5400 ,in zona Iasiului ?


    [email protected]
    3 DM 800 HD ,CCCAM2.1.4

  2. #2
    Moderator Expert
    Join Date
    Jan 1970
    Location
    Austria
    Posts
    9,492
    Posts Thanks / Likes

    Default Re: salut baiti

    Quote Originally Posted by maxim2000
    ...in zona iaului
    Ce zona mai e si asta?

  3. #3
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jan 1970
    Location
    Craiova
    Posts
    1,227
    Posts Thanks / Likes

    Default

    Probabil vrea sa spuna zona Iasiului, dar nu spune nici ce marca de receptor are buba.

  4. #4
    Junior Member Teacher
    Join Date
    Jan 1970
    Location
    Morocco
    Posts
    291
    Posts Thanks / Likes

    Default

    vreau sa zic iasi , am un humax 5400 , merci
    3 DM 800 HD ,CCCAM2.1.4

  5. #5
    Platinum member Expert
    Join Date
    Jul 2002
    Posts
    5,154
    Posts Thanks / Likes

    Default Humy defect

    Care sunt simptomele ptr ca poate te putem ajuta cu ceva documentatie detaliata inclusiv ptr repararea sursei (ptr ca aici mai fac probleme niste condensatoare imbatrinite) asta daca e vorba de depanare hardwarw daca e doar software se rezolva cu sfaturi de la distanta 100%.Daca indici simptomele de manifestare corect.Da si tu ceva detalii si voi incerca sa te ajut.Salut.

  6. #6
    Junior Member Teacher
    Join Date
    Jan 1970
    Location
    Morocco
    Posts
    291
    Posts Thanks / Likes

    Default

    pai daca am ajuns sa caut un reparator ... inseamna ca e naspa :P ,problema este ca tre sa schimbe ambele flasuri, la inscriere da eraore e-fe....merci
    3 DM 800 HD ,CCCAM2.1.4

  7. #7
    Junior Member Teacher
    Join Date
    Jan 1970
    Location
    Morocco
    Posts
    291
    Posts Thanks / Likes

    Default

    pai daca am ajuns sa caut un reparator ... inseamna ca e naspa :P ,problema este ca tre sa schimbe ambele flasuri, la inscriere da eraore E-FE....merci
    3 DM 800 HD ,CCCAM2.1.4

  8. #8
    Platinum member Expert
    Join Date
    Jul 2002
    Posts
    5,154
    Posts Thanks / Likes

    Default Error code for Humax

    Poate te ajuta la ceva humax error codes:
    E-HC/bC Incorrect header block(CRC-16) The software seems damaged while you receive from web site or e-mail.Pls receive the software again and try to download

    E-dC Incorrect data block(CRC-16) The software seems damaged while you receive from web site or e-mail.Pls receive the software again and try to download

    E-Hn/bF Invalid HDF version This error can be occured when you attempt to download Non-Superset STB software to Superset or Vice-Versa.Pls check the STB model and the software

    E-Id Invalid system ID This error can be occured when you attempt to download F1 software to F1-CI. Pls check the STB model and the software


    E-AC Incorrect application CRC-32 Download latest version of application sw. If it doesn't make it,the flash memory can be thought to be defected


    E-ut UART RX/TX time out There is communication problem between source and target

    1) Check whether the S/W is compressed or not and Check whether you use the proper download tool for the software
    2) Reduce the download speed and try to download again
    3) STB main power Off/On and try to download again
    4) Reset the PC and try to download again


    E-Ad Invalid address Humax made the hdf file with wrong address.Pls notify this error to us and wait until we release the proper software.


    E-Ao Invalid offset address for upload(Odd offset) There was a mistake when we made hdf file from binary file.Pls let us know immediately and wait new release version


    E-Ft Flash program time out The flash memory in STB seems damaged. Pls try to download one more time. If you fail agian,send us back to replace the flash memory device


    E-It/Et EEPROM program time out The EEPROM in STB seems damaged.Pls try to download one more time.If you fail again,replace the EEPROM device


    E-FE Fail compare after flash write Flash memory is damaged.Return the main board(CPU Board)


    E-HF Invalid HDF Format It means that the file you try to download is not a valid HDF format. The file could be damaged in which case you should try downloading it from the Humax web site again. Also please check the file extension is HDF. Also make sure you are using the correct download tool - Wdn4oak+. It can be also occurred when there is some problem on cable, data of PC and loader.


    E-Fn Invalid flash device Flash memory is defected Need to change the flash memory so Pls return the Main Board


    E-AS Incorrect application s Check the software version and STB hardware specification

    not mentioned is

    err rA with three flashing dots, this is usually solved by uploading a new channel settings file

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Reparare Parabolica
    By creatoon in forum RDI - Satelit
    Replies: 8
    Last Post: 11th May 2006, 04:39
  2. MAX TV in Iasi?
    By oleman in forum DTH & Cable-Romania
    Replies: 3
    Last Post: 13th October 2005, 10:16
  3. Reparare MPG2
    By picieri in forum DVD - DIVX - HIFI
    Replies: 0
    Last Post: 6th March 2005, 14:57

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top