>>> Not possible, use setup above (using RF).Originally Posted by hummywe want to use RF signal (Output of reciever) UHF far 390 meter.use Coaxil Cable RG6/U 75 OHMS
I Use UHF AMPLIFIER 16db, 1 Input 4 out 3TV OUT PUT+1 OUTPUT DIRECT.ALL Out Put Occupied I Connect UHF DIRECT Out Put . IN THIS CABLE I Have 2 JONT. Source Then 20 Mtr JOINT+350 +20 meter 2nd joint then T.V. if i buy two UHF Amplifier and fixed on joint place Can it work? like thist Amplifier+20mtr Than Amplifier+ 350mtr Cable+ Amplifier +20 mtr=T.V. is this o.k or not.Mean to say Joint Place Fixed Amplifer.
>>> Above is OK!
i connect in Video out put 390meter Cable other end i recieve 100%Clear.
as i told u i used Coaxil Cable RG6/U 75 OHMS. So for Audio it is very Difficult to Pull another cable. IS THERE SOME THING AVAILABLE LIKE FOR EXAMPLE I TAKE AUDIO/VIDEO FROM THE RECIEVER IN THE MOUDULE THE Coaxil Cable RG6/U 75 OHMS THEN OUT AGAIN MOUDULE
FROM THIS OUT PUT TAKE TO T.V.INPUT