Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 4 123 ... LastLast
Results 1 to 15 of 53

Thread: meoboot

  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Posts
    312
    Posts Thanks / Likes

    Default meoboot

    am inteles ca singura image cu meoboot este blackhole.ok, formatez stick-ul fat 32 il pun la spate , pun meoboot pe el, dar cand e vorba sa incarc o noua imagine, nu am decat ori numele imaginii prea lung ori nu mi-o pune pentru c a ea este in format usb,zip.Cum se procedeaza totusi?va multumesc anticipat!

  2. #2
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default MeoBoot 1

    To use MeoBoot, obviously, you need to install a devices (HDD or USB Stick), to format it in EXT4 and to mount it.
    You can format and mount the device by Black Hole Devices Manager.

    After installing your device, you have to enable MoBoot by opening it by Black Hole Green Panel and choosing your preferred device to use for multiboot.









    After you made your choice, you have to restart MeoBoot for to use it.




    Now, via an FTP software, you have to upload one or more image in USB.zib format into /media/meoboot/MbootUpload and then into MeoBoot panel you have to select Install Image (red button).




    Therefore, a new panel will be open and you will be able to select which image you want to install by moving left and right arrows on your remote control into Source Image file option.




    Once you select an image to install, by moving the remote control arrow down, you will select the Image Name option and you will be able to write the name of the image you are installing (it will be the same you will see in MeoBoot menu panel after installing).




    Finally, by moving remote control down arrow again, you will find the option to choice if to Copy setting to new Image or not to do it.




    Now you have only to push the red button to install the image and a new panel will be open with an executing progress message.




    After some minutes, the new image will be installed and the Vu+ will restart booting with the last image installed by MeoBoot.




  3. #3
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default MeoBoot 2

    Now, when you open MeoBoot you will see all the installed images and you will able to manage them.
    You will be able to choice the image for next boot (green button), to delete a multiboot image (yellou button) or to use MeoBoot Tools (blue button).




    Using MeoBoot Tools, you will be able to make Images multiboot Backup and to manage the same backups (restore and delete).














    Enjoy your Vu+
    Sursa : vuplus-community




  4. #4
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    @violonist
    Daca numele imaginii este prea lung, editezi, stergi si-l faci mai scurt, sau redenumesti si apoi functioneaza...




  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Posts
    312
    Posts Thanks / Likes

    Default

    ce bine ar fi fost daca aveam si traducerea in romana a ceea ce ati pus mai sus...sper sa nu va supar...

  6. #6
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2012
    Location
    the Holy Land
    Posts
    408
    Posts Thanks / Likes

    Default

    a propos de meoboot,am formatat un disk USB,dar cand incerc sa pun meoboot pe el nu ma lasa,
    ma trimite sa fac partitie,si desi am incercat in fel si chip,nu am reusit,
    poate cineva sa ma indrume?
    3x1.20m
    1x0.8m
    VU+ solo
    VU+ solo se
    DOLCE HDx3
    TVR HD
    7.3W,4W,0.8W,,9+10E,13E,16E,19.2E,23.5E,25.5+26E,3 9E

  7. #7
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    @sardonic
    Este de preferat sa folosesti un stick usb de 8Gb pe care-l pui in spate si care va ramane al receptorului, faci pe el 2 partitii de cate 4 Gb (in img. BH 2xbuton albastru/Usb Format Wizard), dupa care din Devices Manager faci mount la o partitie ca /univers si la cealalta /media/usb
    Partitia /univers va fi folosita pentru accesarea celor 3 universuri paralele, poti face tot felul de teste fara a afecta imaginea din flash, poti testa toate plagin-urile dorite pentru ca dispune de un flash de aproape 4 Gb - lung tasta rosie
    Partitia /media/usb, pentru MeoBoot, Swap File, picons, ddsubt, Personal Backup...etc




  8. #8
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    Quote Originally Posted by violonist View Post
    ce bine ar fi fost daca aveam si traducerea in romana a ceea ce ati pus mai sus...sper sa nu va supar...
    Folosesti Google Chrome sau

    https://translate.google.com/




    Last edited by Didi; 3rd May 2014 at 22:32.




  9. #9
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2012
    Location
    the Holy Land
    Posts
    408
    Posts Thanks / Likes

    Default

    @didi mersi
    dar la partition imi scrie "permission denied"
    sa fie stickul de vina?
    3x1.20m
    1x0.8m
    VU+ solo
    VU+ solo se
    DOLCE HDx3
    TVR HD
    7.3W,4W,0.8W,,9+10E,13E,16E,19.2E,23.5E,25.5+26E,3 9E

  10. #10
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    Ar trebui sa mearga daca urmezi corect pasii in Usb Format Wizard...




  11. #11
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2012
    Location
    the Holy Land
    Posts
    408
    Posts Thanks / Likes

    Default

    pasii i-am facut exact dupa explicatii,raspunsul a ramas la fel,
    iata ce apare:

    execution progress:
    Partitioning: /dev/sda
    /bin/sh: /tmp/sfdisk.temp:
    Permission denied!
    Execution finished
    3x1.20m
    1x0.8m
    VU+ solo
    VU+ solo se
    DOLCE HDx3
    TVR HD
    7.3W,4W,0.8W,,9+10E,13E,16E,19.2E,23.5E,25.5+26E,3 9E

  12. #12
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Posts
    312
    Posts Thanks / Likes

    Default

    /bin/sh:syntax error:unterminated quated string

  13. #13
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Posts
    312
    Posts Thanks / Likes

    Default

    unde gresesc la instalarea imagini in meoboot , de-mi da syntax error?

  14. #14
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    @sardonic
    Asta sper sa ta ajute...

    How to Format USB stick

    As follows :-
    1} Press the Blue button twice @STB Remote Control, you will then see this menu{1}

    2}Then Select Usb Format Wizard, press the Red button and then press Red again. You see info about connecting your USB stick [you will see step by step info, telling you what to do] {2}

    3} After you have connected your usb stick, push Red button and info page will show you what it is doing, please follow these instructions.
    If your USB is found by the image you will see {3}

    4} Now press Red button again, after this you will see info about your usb stick.
    Now you can choose how many partitions you want { 4}

    5} I chose 2 partitions, so after selecting the amount you want, you will be asked, what size partitons you want to create {5}

    5} After inputting the size you want, press OK button and you will see info on the scree, and you will be ready to format USB. Now press Red button {6}

    6} Now the partitions have to be created and formatted you will see this info {7} so press ok button

    8} Now the box will give you info about the partitons you made {8}

    9} Now you are asked how you want the partitons to be formatted so you will see the following options. {9}

    10} Now it will format all of your partitions and when done, press Ok button {10}

    11} Now the box will reboot, so that it can detect the new partions on your usb stick, once rebooted you will need to mount the partions in the Black Hole Devices manger panel, you can chose Universes, USB, Video and many other options depending on your needs.

    Sursa : vuplus-community




  15. #15
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Posts
    312
    Posts Thanks / Likes

    Default

    image care o instalez sau o redenumesc trebuie sa aiba zip la sfarsit?

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top