Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 29
  1. #1
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Question Tvr Card not AU in Oscam.....


    Using Sunray (DM800Clone) Nemesis&Oscam. Trying to update TVR card for hours with no luck . Keep receiving skipped shared Emm's. Here is the Cfg-


    [reader]
    label = TVR
    protocol = mouse
    device = /dev/ttyUSB1
    caid = 0500
    ecmwhitelist = 0500:6B
    detect = cd
    ident = 0500:025900,025910,FFF720,000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    dropbadcws = 1
    auprovid = 025900

    The log-
    2013/11/27 21:53:44 56F4F8 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0500 PROVID 025900 ECMPID 0500 ANY CHID VPID 0064
    2013/11/27 21:53:44 56F4F8 c dvbapi (0500&025900/08E2/0001/61:00000000000000000000000000000000): invalid (0 ms) - TVR 1 (invalid SID)


    What is wrong?

  2. #2
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Oct 2005
    Location
    Iasi / SE UK
    Posts
    1,025
    Posts Thanks / Likes

    Default

    It needs manual update , so you got to phone provider to send emm's to your card .
    DM-800 clona SIM201 bl84 , Cristor Atlas 100HD

  3. #3
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Default

    Thanks for the reply. The card is not new and was activated long time ago. It was valid untill Oct 23rd but now trying to update again after not using . The cfg is right? Oscam is capable to update this card or do I need Scam or even original Via Cam?
    Regards!

  4. #4
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Oct 2005
    Location
    Iasi / SE UK
    Posts
    1,025
    Posts Thanks / Likes

    Default

    Last time i activated it only worked on emu Mgcamd 1.30d - Newcs 1.6.2
    DM-800 clona SIM201 bl84 , Cristor Atlas 100HD

  5. #5
    Junior Member Teacher
    Join Date
    Aug 2005
    Posts
    285
    Posts Thanks / Likes

    Default

    Quote Originally Posted by pazitush View Post
    Using Sunray (DM800Clone) Nemesis&Oscam. Trying to update TVR card for hours with no luck . Keep receiving skipped shared Emm's. Here is the Cfg-


    [reader]
    label = TVR
    protocol = mouse
    device = /dev/ttyUSB1
    caid = 0500
    ecmwhitelist = 0500:6B
    detect = cd
    ident = 0500:025900,025910,FFF720,000000
    group = 1
    emmcache = 1,3,2
    blockemm-unknown = 1
    dropbadcws = 1
    auprovid = 025900

    The log-
    2013/11/27 21:53:44 56F4F8 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 0500 PROVID 025900 ECMPID 0500 ANY CHID VPID 0064
    2013/11/27 21:53:44 56F4F8 c dvbapi (0500&025900/08E2/0001/61:00000000000000000000000000000000): invalid (0 ms) - TVR 1 (invalid SID)


    What is wrong?


    its says invalid SID this 0000000000 are also incorrect

    + u have turned on bloker so how u wana update card?

    and u r using ecm whielist what for ? its freesat card.

    wrong settings
    looking for JSTV subscribers. & 9 east

  6. #6
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Default

    BigApple-

    I was blocking only unknown Emm's. But changed it. Still the same- Keep receiving NOK ECM & Skiped Emm.

    Dvbapi cfg=
    P:0500:025900
    L:0500:025900 6B
    M: 0500:000000:000F 0500:025900 #TVRHD
    M: 0500:000000:0001 0500:025900 #TVR1
    M: 0500:000000:0002 0500:025900 #TVR2

    It is a TVR card....

    I wonder if Oscam can update at all...............Any advise ?

  7. #7
    MICROCHIP Expert
    Join Date
    Feb 2008
    Posts
    2,882
    Posts Thanks / Likes

    Default

    Dont use oscam writh dvbapi use oscam-mgcamd i't i's work update you card.
    ....Nu e orfan cel fara tata si fara mama, ci cel fara invatatura......

    Possiamo perdonare un bambino che ha paura del buio.
    La vera tragedia della vita č quando gli uomini hanno paura della luce.


  8. #8
    Junior Member Teacher
    Join Date
    Aug 2005
    Posts
    285
    Posts Thanks / Likes

    Default

    mgcamd will make updates but mainly for nagra cards this is specific viaccess card u can also use newcamd protocol


    config:
    [reader]
    label = tvr
    description = TVR-HD
    protocol = mouse
    device = /dev/ttyS0
    services = tvr
    showcls = 0
    caid = 0500
    detect = cd
    mhz = 357
    cardmhz = 357
    ident = 0500:025900,025910,FFF720
    group = 1

    log excerpt:
    2011/08/01 11:46:59 0 tvr card detected
    2011/08/01 11:47:03 B7601D10 r ATR: 3F 77 18 00 00 C2 14 00 C1 68 90 00
    2011/08/01 11:47:05 B7601D10 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
    2011/08/01 11:47:07 B7601D10 r type: Viaccess (standard atr), caid: 0500, serial: xxxxxxxxxx
    2011/08/01 11:47:07 B7601D10 r providers: 3 (FFF720,025900,025910)
    2011/08/01 11:47:07 B7601D10 r [viaccess-reader] ready for requests
    2011/08/01 11:47:07 B7601D10 r found cardsystem viaccess
    2011/08/01 11:47:07 B7601D10 r [viaccess-reader] card detected
    2011/08/01 11:47:07 B7601D10 r [viaccess-reader] serial: xxxxxxxxxx
    2011/08/01 11:47:07 B7601D10 r provider: 1, id: FFF720, name: TVR, sa: BF645F56, geo: empty
    2011/08/01 11:47:07 B7601D10 r provider: 2, id: 025900, name: TVR 1, sa: BF645F56, geo: FF FF FF FF
    2011/08/01 11:47:08 B7601D10 r provider: 3, id: 025910, name: TVR 2, sa: BF645F56, geo: FF FF FF FF



    best way post full log 256 switch channels what answer
    turn off all blokers

    what oscam version?
    looking for JSTV subscribers. & 9 east

  9. #9
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Default

    Oscam latest version-

    OSCAM 1.20-unstable_svn build r9059


  10. #10
    Junior Member Teacher
    Join Date
    Aug 2005
    Posts
    285
    Posts Thanks / Likes

    Default

    go back to older versions some stuff has been removed in latest versions cfg has ben changed also
    looking for JSTV subscribers. & 9 east

  11. #11
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Default

    Which version do you know that makes AU to this Via card?

  12. #12
    Junior Member Teacher
    Join Date
    Aug 2005
    Posts
    285
    Posts Thanks / Likes

    Default

    there are plenty too test u dont need to reboot your box each time

    just rewrite bin

    but still after u change to some older i mean 8xxx


    post full log 256 also during channel change

    i dont know how often they are sending emm updates but i also know other viaccess provider with not working properly

    this is why i dont like that many oscam updates they can simply remove something old and replace

    i know one guru of oscam if u still wont be able to update emms i will post on that board


    btw change reader to Smargo and see diffrence.
    looking for JSTV subscribers. & 9 east

  13. #13
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Default

    Changed to Smargo and to Internal. No Joy. Also tried by Mgcamd. Still no joy. I think I will try to update with original Via cam or by Scam.....

  14. #14
    Junior Member Teacher
    Join Date
    Aug 2005
    Posts
    285
    Posts Thanks / Likes

    Default

    your cfg still can be not correct

    config:
    [reader]
    label = tvr
    description = TVR-HD
    protocol = mouse
    device = /dev/ttyS0
    services = tvr
    showcls = 0
    caid = 0500
    detect = cd
    mhz = 357
    cardmhz = 357
    ident = 0500:025900,025910,FFF720
    group = 1


    remove ecmwhitelist
    alkso remove auprovider
    looking for JSTV subscribers. & 9 east

  15. #15
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Posts
    25
    Posts Thanks / Likes

    Default


    No way...
    2013/12/01 21:51:05 2B20FA58 c dvbapi (0500&025900/08E2/0002/61:905778422306616988EDEBED63B40F91): rejected group (2 ms) - TVR 2 (no matching reader)
    I will try Oscam..

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top