Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 9 of 9
  1. #1
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,119
    Posts Thanks / Likes

    Post Back up img. in meoboot

    cum se pune o imagine back up in meoboot ?
    sau alte imagini vu+ (mai multe) in meoboot

  2. #2
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default MeoBoot ˇ Short user guide

    To use MeoBoot, obviously, you need to install a devices (HDD or USB Stick), to format it in EXT4 and to mount it.

    You can format and mount the device by Black Hole Devices Manager.


    After installing your device, you have to enable MoBoot by opening it by Black Hole Green Panel and choosing your preferred device to use for multiboot.







    After you made your choice, you have to restart MeoBoot for to use it.



    Now, via an FTP software, you have to upload one or more image in USB.zib format into /media/meoboot/MbootUpload and then into MeoBoot panel you have to select Install Image (red button).



    Therefore, a new panel will be open and you will be able to select which image you want to install by moving left and right arrows on your remote control into Source Image file option.



    Once you select an image to install, by moving the remote control arrow down, you will select the Image Name option and you will be able to write the name of the image you are installing (it will be the same you will see in MeoBoot menu panel after installing).



    Finally, by moving remote control down arrow again, you will find the option to choice if to Copy setting to new Image or not to do it.



    Now you have only to push the red button to install the image and a new panel will be open with an executing progress message.



    After some minutes, the new image will be installed and the Vu+ will restart booting with the last image installed by MeoBoot.







  3. #3
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,261
    Posts Thanks / Likes

    Default

    Now, when you open MeoBoot you will see all the installed images and you will able to manage them.

    You will be able to choice the image for next boot (green button), to delete a multiboot image (yellou button) or to use MeoBoot Tools (blue button).



    Using MeoBoot Tools, you will be able to make Images multiboot Backup and to manage the same backups (restore and delete).













    Sursa : vuplus community




  4. #4
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,119
    Posts Thanks / Likes

    Default

    Multumesc !

    ......stiam dar nu reusesc...inca! undeva e ceva

    Thnx!

  5. #5
    Silver Member Expert
    Join Date
    Jul 2003
    Location
    Romania
    Posts
    2,782
    Posts Thanks / Likes

    Default

    m-am chinuit si eu odata ... si pana la urma am pus fisierul .zip in /media/meoboot/MbootUpload/ si l-am instalat din meboot.
    apropo ... eu ca sa instalez trebuie sa fiu in flash intotdeauna
    Cand esti mort , nu stii ca esti mort . E greu doar pentru ceilalti !
    La fel si cand esti prost ...
    __________________________________________________ _____________________________________________


  6. #6
    Junior Member Teacher
    Join Date
    Nov 2007
    Location
    Dambovita
    Posts
    251
    Posts Thanks / Likes

    Default

    @ Didi a fost exact,...daca folosesti imagine BH in flash,o metoda f simpla este :buton albastru x 2 ,alegi usb format wizard-intuitiv te duce catre formatare,patitionare si apoi mount usb,hdd.Instalezi meoboot unde doresti usb(recomandat) sau hdd,apoi pui imaginea pe care o vrei in /media/usb/meoboot/MbootUpload/ sau /media/hdd/meoboot/MbootUpload/ si instalare.
    Daca ai imagine BH si in flash si pe stick poti instala orice imagine din BH-stick,nu mai este nevoie sa treci pe flash.
    Curiosity killed the cat !
    Vu Duo2,DM500Hd a8p modat kit Ridax,Panasonic 47AS740E,1,9Al circulara simetrica+1,25Al Gibertini+1,0Al Triax,diseq10x1

  7. #7
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,119
    Posts Thanks / Likes

    Default

    am gasit problema ..usb era formatat ,,ext 2,, aveam picoane ddsubt mp3 si altele acum E oK!

  8. #8
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Jun 2011
    Posts
    73
    Posts Thanks / Likes

    Default

    Quote Originally Posted by Didi View Post
    To use MeoBoot, obviously, you need to install a devices (HDD or USB Stick), to format it in EXT4 and to mount it.

    You can format and mount the device by Black Hole Devices Manager.


    After installing your device, you have to enable MoBoot by opening it by Black Hole Green Panel and choosing your preferred device to use for multiboot.

    http://i876.photobucket.com/albums/a...ps25d7e143.jpg

    http://i876.photobucket.com/albums/a...ps8afa7159.jpg

    http://i876.photobucket.com/albums/a...ps8a0a4eee.jpg

    After you made your choice, you have to restart MeoBoot for to use it.

    http://i876.photobucket.com/albums/a...psba2f3977.jpg

    Now, via an FTP software, you have to upload one or more image in USB.zib format into /media/meoboot/MbootUpload and then into MeoBoot panel you have to select Install Image (red button).

    http://i876.photobucket.com/albums/a...psac311dbc.jpg

    Therefore, a new panel will be open and you will be able to select which image you want to install by moving left and right arrows on your remote control into Source Image file option.

    http://i876.photobucket.com/albums/a...psdb71027b.jpg

    Once you select an image to install, by moving the remote control arrow down, you will select the Image Name option and you will be able to write the name of the image you are installing (it will be the same you will see in MeoBoot menu panel after installing).

    http://i876.photobucket.com/albums/a...ps74610349.jpg

    Finally, by moving remote control down arrow again, you will find the option to choice if to Copy setting to new Image or not to do it.

    http://i876.photobucket.com/albums/a...ps53bb4f7e.jpg

    Now you have only to push the red button to install the image and a new panel will be open with an executing progress message.

    http://i876.photobucket.com/albums/a...ps6980c6d8.jpg

    After some minutes, the new image will be installed and the Vu+ will restart booting with the last image installed by MeoBoot.

    http://i876.photobucket.com/albums/a...ps4f3bb385.jpg





    Thanks

  9. #9
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,119
    Posts Thanks / Likes

    Default

    si nu uita f.imp. USB Stick, formatat in EXT4 apoi mount .

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top