Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 0 EUR (0%)
Donate to support this site...

Page 1 of 17 12311 ... LastLast
Results 1 to 15 of 245

Thread: Vu+ Solo 2

  1. #1
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Feb 2009
    Posts
    8
    Posts Thanks / Likes

    Default Vu+ Solo 2

    se comentan en otros foros que valdra unos 500 euros y el precio oficial del vu solo 2 es de 329 euros

  2. #2
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Feb 2009
    Posts
    8
    Posts Thanks / Likes

    Default

    tambien se comenta que el vuo duo 2 saldra a principios de enero y el solo 2 saldra a mediado dle mes que viene

  3. #3
    MICROCHIP Expert
    Join Date
    Feb 2008
    Posts
    2,874
    Posts Thanks / Likes

    Default

    Noul va fii relasata cu
    ....Nu e orfan cel fara tata si fara mama, ci cel fara invatatura......

    Possiamo perdonare un bambino che ha paura del buio.
    La vera tragedia della vita è quando gli uomini hanno paura della luce.


  4. #4
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,097
    Posts Thanks / Likes

    Default

    vu+ solo2 se poate deja comanda . . . pret rezonabil...
    ,,*** Time is an illusion ! ***,,



  5. #5
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default



    Au intervenit ceva modificari fata de modelul prezentat la ANGA.( dar sunt ... de bine )


  6. #6
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,097
    Posts Thanks / Likes

    Default

    sa-i vedem pretul . . pare cel mai tare de pe piata.. (iphon5 se vinde la 500 euro pretul de productie fiind 103 euro)

  7. #7
    Member Mentor
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Location
    Bucharest
    Posts
    701
    Posts Thanks / Likes

    Default

    329 de euro pret final la un renumit reseller din Germania.(pret pentr Vu Solo2....desi threadul este despre Duo2!)

  8. #8
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default Vu+ Solo 2

    Este necesar sa deschidem si un Thread dedicat si acestui model...merita.

  9. #9
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default

    VU+ Solo² Full HD Twin DVB-S2 Linux HDTV PVR


    Digitaler Satelliten-Empfangsreceiver für HD TV- und Radioprogramme.
    Hauptmerkmal ist der 1300 MHz starke Prozessor der VU+ Solo². Erleben Sie HighDefinition TV mit Ihrem VU+ Solo².
    • Transcoding Funktion
    • Airplay Funktion
    • Opera Browser
    • HbbTV
    • HDMI 1.4 Anschluss
    • HD PIP
    • Gigabit Lan
    • Plug&Play Halterung für 2,5" SATA – Festplatten
    • 12 stelliges VFD Display
    • Externes 12 V Netzteil
    Technische Highlights:

    o 1300 MHz Mips Prozessor
    o 256MB Flash
    o 1GB DDR3 DRAM
    o Gigabit Lan
    o 1 x DVB Common-Interface Einschub
    o 2 x Smartcard-Reader (Xcrypt)
    o 3 x USB(1x Front, 2 x Rückseite)
    o SPDIF Audio Ausgang optisch (digital)
    o 1 x HDMI 1.4 Video/Audio Ausgang (digital)
    o 1 x Scart (TV)
    o 1 x Video Ausgang RCA
    o 2 x Audio Ausgang (L/R) RCA (analog)
    o Plug&Play Halterung für 2,5" SATA – Festplatten
    o unlimitierte Kanalliste für TV/Radio
    o EPG (electronic program guide) Unterstützung
    o Unterstützung von Bouquet-Listen
    o OSD in vielen Sprachen und Skin-Unterstützung
    o automatischer /manueller Kanalsuchlauf
    o DiSEqC 1.0/1.1/1.2, USALS
    o Externes 12 Volt Netzteil
    o Netzschalter

    VU+ Solo² Technische Daten:

    DVB-S2 Tuner:
    Eingangsfrequenzbereich 950...2150 MHz
    Eingangspegelbereich - 65 dBm...- 25 dBm
    Tuner Eingang F-Buchse
    Eingangsimpedanz 75 Ohm
    AFC-Fangbereich +/- 3,5 MHz
    Demodulation QPSK und 8PSK
    FEC Viterbi und Reed-Solomon
    Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
    Roll-off Factor 35 %
    Common-Interface:
    Common-Interface Stromverbrauch max. 0,35A/5V
    Videodekodierung:
    Videokompression MPEG-2 / H.264 und MPEG-1 kompatibel
    Videostandard PAL G/ 25 Hz, NTSC
    Bildformat 4:3 / 16:9
    Letterbox für 4:3 TV-Geräte
    Ausgang Digital:
    Ausgangspegel 0,5 Vss an 75 Ohm
    Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Ausgang optisch, coaxial (AC3)
    Audiokodierung:
    Audiokompression MPEG-1 & MPEG-2 Layer I und II, MP3
    Audio Mode Dual (main/sub), Stereo
    Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Ausgang Analog:
    Ausgangspegel L/R 0,5 Vss an 600 Ohm
    THD > 60 dB (1 kHz)
    Übersprechen < -65 dB
    Video-Parameter:
    Eingangspegel FBAS 1 Vss +/- 0.25 dB an 75 Ohm

    TV-Scart:
    Ausgang: FBAS, RGB, über OSD wählbar
    Ethernet:
    1000/100/10 MBit kompatibles Interface
    USB:
    USB 2.0 Anschluss (3x)
    LNB Stromversorgung DVB-S2 Tuner:
    LNB Strom 400mA max. , kurzschlussfest
    LNB Spannung horizontal “ohne Last 19,5V“17,6V bei 400mA
    LNB Spannung vertikal “ohne Last 14,5V “ 11,8V bei 400mA
    LNB wird im Standby-Modus abgeschaltet
    Steuerung der Satellitenpositionen:
    DiSEqC 1.0/1.1/1.2 und USALS - Rotor Steuerung
    Leistungsaufnahme:
    < 13W (im Betrieb, mit LNB)
    < 12W (im Betrieb, ohne LNB)
    < 0,5W (Deep-Standby-Mode)
    Eingangsspannung:
    Externes Netzteil:
    Eingang:
    110-240V AC / 50-60Hz / 1,0A
    Ausgang:
    12V = / 3,5A
    Allgemeines:
    Umgebungstemperatur +15°C...+35°C
    Luftfeuchtigkeit < 80%
    Abmessungen (B x T x H): 280 mm x 200 mm x 50 mm
    Gewicht: 2,0 kg ohne HDD

  10. #10
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default


  11. #11
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default Black Hole Vu+ Solo2 1.7.9

    Black Hole 1.7.9
    This is the first image for Solo2.
    This image is Multiboot and MultiDimensional

    • Kernel 3.3.6
    • Vu+ drivers: 20121109
    • Enigma2 ver: 20121211


    • Support Usb tuners
    • Support Wifi dongles
    • Support 1080p
    • Support PIP 2 channels HD
    • Skin: Army Touch HD
    • Support 32 bit png
    • New Plugin AutoShutDown
    • Support Meoboot
    • Support Multiple Universes
    • Support full backup (by dpeddi)
    • Support ALL extra settings and panels of standard Black Hole images.
    • New New New Black Hole Speed Up

    About Black Hole Speed Up:
    As you know a large number of plugins are installed by default in our images.
    During startup Enigma2 has to scan and check all the installed plugins.
    Many of us don't use all of these plugins.
    The new Black Hole Speed Up feature allows you to disable/enable the default plugins without having to completely remove the plugin.
    By disabling all the plugins we are not using without having to remove them enables you to reinstate them at any time.
    This will speed up the image performance.









    WARNING: This Image is not compatible with the previous skins
    WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot.
    The image MUST be installed in the flash.
    Black Hole can not support images not installed in the flash.

    This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

    Please note that of all images Black Hole now has the best epg system:
    - Integrated OpenEpg
    - Rytec dedicated epg.dat
    - New system epg.dat outside.
    This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.
    Community members can then download it from our servers.
    This feature provides other benefits such as:
    Increase download speed of EPG
    Download EPG from any channel
    Schedule the download of EPG decoder even during standby
    Users can customize the providers using Add / Remove function

    Main functions of the buttons on the remote

    OK button = Skin with simple information
    OK button x 2 = Extra Info Skin
    Blue button = Black Hole Blue Panel
    Blue button and then Red button = Black Hole Epg Panel
    Blue button and then Yellow button = System Monitor Panel
    Blue button long press = Extensions
    Yellow button = Time Shift
    Green button = Black Hole Green Panel
    Green button long press = Subservices
    Green button and then Red button = Fast Plugin Setup
    Green button x 2 = Fast Plugin
    Button Red short press= access HbbTv functions
    Button Red long press= Red Panel (Parallel Universes Teleportation)

    Addons

    Green button and then Yellow button takes you to:-
    Dedicated server for BlackHole addons
    Download and install additional packages from the Black Hole server

    Infobar / OSD

    Analog Clock Gui
    Channel orbital location

    Advanced Tuner Info: Sr Freq Pol Fec
    Signal SNR, BER
    Infobar picons

    Characteristics of BlackHole Panels
    Blue Panel
    Extra Settings
    Black Hole Speed Up
    Black Hole Cron Manager (Manage schedules)
    OSD Settings (OSD configuration)
    Devices Manager
    Usb Format Wizard
    Kernel Modules Manager(Kernel module operator)
    Inadyn Settings (Configure Inadyn)
    Swap File Settings (Configure File Swap)
    Hard Disk Settings (Configure Hard Drive)
    OpenVPN Panel ( OpenVPN Panel)
    Samba / CIFS Panel ( Samba Panel)
    NFS Server Panel ( NFS server Panel)
    Telnet Panel ( Telnet Panel)
    FTP Panel ( FTP Panel)
    UPnP Client Djmount
    UPnP Server Mediatomb
    UpnP Server Minidlna
    Pcsc Panel
    Tuner Server
    Network Browse & Mountpoints
    Info Panel
    1 - Gui Setting (Gui configurations)
    2 - Service Information (information system)
    3 - About (info)
    Memory (Memory)
    Space (capacity)
    CPU (processor)
    Process (process)

    EPG Panel
    Global settings (global settings EPG)
    Setting Provider (ISP settings)

    Green Panel

    Fast Plugin Setup (Configure quick access to your favourite plugin)

    Fast Plugin (Access your favourite plugin)

    Addons (added)
    Addons Download Manager (Manager for package downloading)
    Installation manual packages (Manual installation of Black Hole packages)
    Manual Install IPK packages (Manual installation of IPK packages)
    Addons Uninstall Panel (Uninstalled packages)
    Black Hole Statistics (See connections, top downloads and more)
    Characteristics of BlackHole Panels
    Red Panel
    BH Parallel Universe Teleportation
    Black Hole
    Avalon
    Chaos
    Ghost

    Credits
    Thanks to Pedro_Newbie for Backup script
    Thanks to the group of Beta Testers.
    Thanks to Rytec for providing us with the server with all epg.dat files.
    Thanks to MaxZ4 for Integrated EPG loader.
    Thanks to Skaman for Cross EPG
    Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.
    Thanks to [email protected] for the file satellites.xml.
    Thanks to ambrosa (Pli Board) for ready-to-go A867 driver patch

    DISCLAIMER

    THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

    THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

    LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

    LICENSE (TERM OF USE)

    THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

    ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.
    This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.
    Attached Files:

    BlackHole-1.7.9-vusolo2_usb.zip

    File size:81.3 MB

  12. #12
    Member Mentor
    Join Date
    Aug 2007
    Location
    Hatzfeld
    Posts
    753
    Posts Thanks / Likes

    Default

    asta numa solo nu mai e, e ultimo cu 7020 hd impreuna ...


    Quote Originally Posted by Didi View Post
    VU+ Solo² Full HD Twin DVB-S2 Linux HDTV PVR


    Digitaler Satelliten-Empfangsreceiver für HD TV- und Radioprogramme.
    Hauptmerkmal ist der 1300 MHz starke Prozessor der VU+ Solo². Erleben Sie HighDefinition TV mit Ihrem VU+ Solo².
    • Transcoding Funktion
    • Airplay Funktion
    • Opera Browser
    • HbbTV
    • HDMI 1.4 Anschluss
    • HD PIP
    • Gigabit Lan
    • Plug&Play Halterung für 2,5" SATA – Festplatten
    • 12 stelliges VFD Display
    • Externes 12 V Netzteil
    Technische Highlights:

    o 1300 MHz Mips Prozessor
    o 256MB Flash
    o 1GB DDR3 DRAM
    o Gigabit Lan
    o 1 x DVB Common-Interface Einschub
    o 2 x Smartcard-Reader (Xcrypt)
    o 3 x USB(1x Front, 2 x Rückseite)
    o SPDIF Audio Ausgang optisch (digital)
    o 1 x HDMI 1.4 Video/Audio Ausgang (digital)
    o 1 x Scart (TV)
    o 1 x Video Ausgang RCA
    o 2 x Audio Ausgang (L/R) RCA (analog)
    o Plug&Play Halterung für 2,5" SATA – Festplatten
    o unlimitierte Kanalliste für TV/Radio
    o EPG (electronic program guide) Unterstützung
    o Unterstützung von Bouquet-Listen
    o OSD in vielen Sprachen und Skin-Unterstützung
    o automatischer /manueller Kanalsuchlauf
    o DiSEqC 1.0/1.1/1.2, USALS
    o Externes 12 Volt Netzteil
    o Netzschalter

    VU+ Solo² Technische Daten:

    DVB-S2 Tuner:
    Eingangsfrequenzbereich 950...2150 MHz
    Eingangspegelbereich - 65 dBm...- 25 dBm
    Tuner Eingang F-Buchse
    Eingangsimpedanz 75 Ohm
    AFC-Fangbereich +/- 3,5 MHz
    Demodulation QPSK und 8PSK
    FEC Viterbi und Reed-Solomon
    Viterbiraten 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9
    Roll-off Factor 35 %
    Common-Interface:
    Common-Interface Stromverbrauch max. 0,35A/5V
    Videodekodierung:
    Videokompression MPEG-2 / H.264 und MPEG-1 kompatibel
    Videostandard PAL G/ 25 Hz, NTSC
    Bildformat 4:3 / 16:9
    Letterbox für 4:3 TV-Geräte
    Ausgang Digital:
    Ausgangspegel 0,5 Vss an 75 Ohm
    Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz
    S/PDIF-Ausgang optisch, coaxial (AC3)
    Audiokodierung:
    Audiokompression MPEG-1 & MPEG-2 Layer I und II, MP3
    Audio Mode Dual (main/sub), Stereo
    Abtastfrequenzen 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
    Ausgang Analog:
    Ausgangspegel L/R 0,5 Vss an 600 Ohm
    THD > 60 dB (1 kHz)
    Übersprechen < -65 dB
    Video-Parameter:
    Eingangspegel FBAS 1 Vss +/- 0.25 dB an 75 Ohm

    TV-Scart:
    Ausgang: FBAS, RGB, über OSD wählbar
    Ethernet:
    1000/100/10 MBit kompatibles Interface
    USB:
    USB 2.0 Anschluss (3x)
    LNB Stromversorgung DVB-S2 Tuner:
    LNB Strom 400mA max. , kurzschlussfest
    LNB Spannung horizontal “ohne Last 19,5V“17,6V bei 400mA
    LNB Spannung vertikal “ohne Last 14,5V “ 11,8V bei 400mA
    LNB wird im Standby-Modus abgeschaltet
    Steuerung der Satellitenpositionen:
    DiSEqC 1.0/1.1/1.2 und USALS - Rotor Steuerung
    Leistungsaufnahme:
    < 13W (im Betrieb, mit LNB)
    < 12W (im Betrieb, ohne LNB)
    < 0,5W (Deep-Standby-Mode)
    Eingangsspannung:
    Externes Netzteil:
    Eingang:
    110-240V AC / 50-60Hz / 1,0A
    Ausgang:
    12V = / 3,5A
    Allgemeines:
    Umgebungstemperatur +15°C...+35°C
    Luftfeuchtigkeit < 80%
    Abmessungen (B x T x H): 280 mm x 200 mm x 50 mm
    Gewicht: 2,0 kg ohne HDD

  13. #13
    Banned Friend
    RDI - Board Banned Avatar

    Join Date
    Oct 2012
    Posts
    41
    Posts Thanks / Likes

    Default solo

    Vu solo si are 2 tunere
    355 Euro e pretul si apare pe 17 sept..ajunge acasa de craciun

  14. #14
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default Black Hole Vu+ Solo2 1.7.9-2 (Transcoding)

    Black Hole Vu+ Solo2 1.7.9-2 (Transcoding)



    1) New drivers: 20121217
    - Fix instability issue
    - Fix PIP problem
    - Fix module init problem.
    - Support Transcoding(Beta)

    2) Add trasnscoding streaming plugin(e2), and client(transtreamproxy)
    3)Adjust kernel config
    4) Various fix on Udb Dtt drivers
    5) Ubdate Usbtuner

    About Transcoding (Thx to Ev0 for tests):
    The transcoding function has been tested and is working through the WebInterface with an iPad.
    It works both inside and outside of the home network, therefore also works over the internet, if you have the correct ports open in your router. It also works via 3g (although this obviously isn't perfect).





    WARNING: This Image is not compatible with the previous skins
    WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot.
    The image MUST be installed in the flash.
    Black Hole can not support images not installed in the flash.

    This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

    Please note that of all images Black Hole now has the best epg system:
    - Integrated OpenEpg
    - Rytec dedicated epg.dat
    - New system epg.dat outside.
    This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.
    Community members can then download it from our servers.
    This feature provides other benefits such as:
    Increase download speed of EPG
    Download EPG from any channel
    Schedule the download of EPG decoder even during standby
    Users can customize the providers using Add / Remove function

    Main functions of the buttons on the remote

    OK button = Skin with simple information
    OK button x 2 = Extra Info Skin
    Blue button = Black Hole Blue Panel
    Blue button and then Red button = Black Hole Epg Panel
    Blue button and then Yellow button = System Monitor Panel
    Blue button long press = Extensions
    Yellow button = Time Shift
    Green button = Black Hole Green Panel
    Green button long press = Subservices
    Green button and then Red button = Fast Plugin Setup
    Green button x 2 = Fast Plugin
    Button Red short press= access HbbTv functions
    Button Red long press= Red Panel (Parallel Universes Teleportation)

    Addons

    Green button and then Yellow button takes you to:-
    Dedicated server for BlackHole addons
    Download and install additional packages from the Black Hole server

    Infobar / OSD

    Analog Clock Gui
    Channel orbital location

    Advanced Tuner Info: Sr Freq Pol Fec
    Signal SNR, BER
    Infobar picons

    Characteristics of BlackHole Panels
    Blue Panel
    Extra Settings
    Black Hole Speed Up
    Black Hole Cron Manager (Manage schedules)
    OSD Settings (OSD configuration)
    Devices Manager
    Usb Format Wizard
    Kernel Modules Manager(Kernel module operator)
    Inadyn Settings (Configure Inadyn)
    Swap File Settings (Configure File Swap)
    Hard Disk Settings (Configure Hard Drive)
    OpenVPN Panel ( OpenVPN Panel)
    Samba / CIFS Panel ( Samba Panel)
    NFS Server Panel ( NFS server Panel)
    Telnet Panel ( Telnet Panel)
    FTP Panel ( FTP Panel)
    UPnP Client Djmount
    UPnP Server Mediatomb
    UpnP Server Minidlna
    Pcsc Panel
    Tuner Server
    Network Browse & Mountpoints
    Info Panel
    1 - Gui Setting (Gui configurations)
    2 - Service Information (information system)
    3 - About (info)
    Memory (Memory)
    Space (capacity)
    CPU (processor)
    Process (process)

    EPG Panel
    Global settings (global settings EPG)
    Setting Provider (ISP settings)

    Green Panel

    Fast Plugin Setup (Configure quick access to your favourite plugin)

    Fast Plugin (Access your favourite plugin)

    Addons (added)
    Addons Download Manager (Manager for package downloading)
    Installation manual packages (Manual installation of Black Hole packages)
    Manual Install IPK packages (Manual installation of IPK packages)
    Addons Uninstall Panel (Uninstalled packages)
    Black Hole Statistics (See connections, top downloads and more)
    Characteristics of BlackHole Panels
    Red Panel
    BH Parallel Universe Teleportation
    Black Hole
    Avalon
    Chaos
    Ghost

    Credits
    Thanks to Pedro_Newbie for Backup script
    Thanks to the group of Beta Testers.
    Thanks to Rytec for providing us with the server with all epg.dat files.
    Thanks to MaxZ4 for Integrated EPG loader.
    Thanks to Skaman for Cross EPG
    Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.
    Thanks to [email protected] for the file satellites.xml.
    Thanks to ambrosa (Pli Board) for ready-to-go A867 driver patch

    DISCLAIMER

    THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

    THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

    LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

    LICENSE (TERM OF USE)

    THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

    ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.
    This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.

    Attached Files:

    BlackHole-1.7.9-vusolo2_usb.zip

    File size:81.7 MB

  15. #15
    Senior Member Expert
    Join Date
    Aug 2005
    Posts
    3,230
    Posts Thanks / Likes

    Default

    Black Hole Vu+ Solo2 1.7.9-3
    What's new?

    1) New driver: 20121220
    - Support tuner A Loop through to B
    (Configuration = Tuner A : loop through to B, Tuner B : Normal Setup )
    - Support remote control system code change.
    2) Nimmanager.py : for internally connect tuner A to B
    3) TransCodingSetup : fix locale charset.



    WARNING: This Image is not compatible with the previous skins
    WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot.
    The image MUST be installed in the flash.
    Black Hole can not support images not installed in the flash.

    This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

    Please note that of all images Black Hole now has the best epg system:
    - Integrated OpenEpg
    - Rytec dedicated epg.dat
    - New system epg.dat outside.
    This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.
    Community members can then download it from our servers.
    This feature provides other benefits such as:
    Increase download speed of EPG
    Download EPG from any channel
    Schedule the download of EPG decoder even during standby
    Users can customize the providers using Add / Remove function

    Main functions of the buttons on the remote

    OK button = Skin with simple information
    OK button x 2 = Extra Info Skin
    Blue button = Black Hole Blue Panel
    Blue button and then Red button = Black Hole Epg Panel
    Blue button and then Yellow button = System Monitor Panel
    Blue button long press = Extensions
    Yellow button = Time Shift
    Green button = Black Hole Green Panel
    Green button long press = Subservices
    Green button and then Red button = Fast Plugin Setup
    Green button x 2 = Fast Plugin
    Button Red short press= access HbbTv functions
    Button Red long press= Red Panel (Parallel Universes Teleportation)

    Addons

    Green button and then Yellow button takes you to:-
    Dedicated server for BlackHole addons
    Download and install additional packages from the Black Hole server

    Infobar / OSD

    Analog Clock Gui
    Channel orbital location

    Advanced Tuner Info: Sr Freq Pol Fec
    Signal SNR, BER
    Infobar picons

    Characteristics of BlackHole Panels
    Blue Panel
    Extra Settings
    Black Hole Speed Up
    Black Hole Cron Manager (Manage schedules)
    OSD Settings (OSD configuration)
    Devices Manager
    Usb Format Wizard
    Kernel Modules Manager(Kernel module operator)
    Inadyn Settings (Configure Inadyn)
    Swap File Settings (Configure File Swap)
    Hard Disk Settings (Configure Hard Drive)
    OpenVPN Panel ( OpenVPN Panel)
    Samba / CIFS Panel ( Samba Panel)
    NFS Server Panel ( NFS server Panel)
    Telnet Panel ( Telnet Panel)
    FTP Panel ( FTP Panel)
    UPnP Client Djmount
    UPnP Server Mediatomb
    UpnP Server Minidlna
    Pcsc Panel
    Tuner Server
    Network Browse & Mountpoints
    Info Panel
    1 - Gui Setting (Gui configurations)
    2 - Service Information (information system)
    3 - About (info)
    Memory (Memory)
    Space (capacity)
    CPU (processor)
    Process (process)

    EPG Panel
    Global settings (global settings EPG)
    Setting Provider (ISP settings)

    Green Panel

    Fast Plugin Setup (Configure quick access to your favourite plugin)

    Fast Plugin (Access your favourite plugin)

    Addons (added)
    Addons Download Manager (Manager for package downloading)
    Installation manual packages (Manual installation of Black Hole packages)
    Manual Install IPK packages (Manual installation of IPK packages)
    Addons Uninstall Panel (Uninstalled packages)
    Black Hole Statistics (See connections, top downloads and more)
    Characteristics of BlackHole Panels
    Red Panel
    BH Parallel Universe Teleportation
    Black Hole
    Avalon
    Chaos
    Ghost

    Credits
    Thanks to Pedro_Newbie for Backup script
    Thanks to the group of Beta Testers.
    Thanks to Rytec for providing us with the server with all epg.dat files.
    Thanks to MaxZ4 for Integrated EPG loader.
    Thanks to Skaman for Cross EPG
    Thanks to Lukkino (VDR-Italy) for the source code of OpenTV.
    Thanks to [email protected] for the file satellites.xml.
    Thanks to ambrosa (Pli Board) for ready-to-go A867 driver patch

    DISCLAIMER

    THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.

    THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.

    LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.

    LICENSE (TERM OF USE)

    THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

    ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.
    This is free hobbyist software and it comes with absolutely no warranty. Use it at your own risk.
    Attached Files:

    BlackHole-1.7.9-vusolo2_usb.zip

    File size:81.7 MB

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top