Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 10 EUR (10%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 26
  1. #1
    Gold Member Expert
    Join Date
    Feb 2005
    Posts Thanks / Likes

    Talking EMU: CCcam 2.3.0

    EMU: CCcam 2.3.0

    Descarca de aici: - 1.87MB


    --read CCcam.cfg for details--
    -add seca tunneled nagra card support (may need card reset to see new revision after updating)
    -add SID LIMIT (see CCcam.cfg for details)
    -several smartcard fixes
    -several network fixes
    -added via 3.0 emu (add working key in SoftCam.Key)
    -fixed parsing GLOBAL EMM setting
    -fixed occasional freeze (bug since 2.2.0)
    -random loadbalance preference
    -smartcard fixes
    -several smartcard fixes
    -added SCIDEVICES setting (see CCcam.cfg for details)
    -fixed timings display
    -fixed possible crash with SMP
    -don't clear SMARTCARD SID ASSIGN and LOADBALANCE settings when configfile changes (changing these settings requires a restart, so they should not be touched when config is re-read)
    -added SMARTCARD SID REJECT (see CCcam.cfg for details)
    -distribute ASSIGN/REJECT info to clients to improve performance (needs 2.2.0 server and clients)
    -improved detecting when CCcam.cfg has changed
    -added GLOBAL EMM setting (clientside), to control generation of GA EMM traffic (see CCcam.cfg for details)
    -ndz smartcard fixes
    -ecm timeout decreased
    -via26 emu
    -seca handler improvement
    -important cardreader fixes
    -DRE crypt support
    -963 support
    -reenabled n2 emu
    -several smartcard fixes
    -via emm fixes
    -seca emm fixes
    -added SMARTCARD SID ASSIGN, see CCcam.cfg for details
    -TNT sat
    -double login loop fix
    -serverside emm overload fix
    -fixed MINIMUM CLIENT VERSION check, broken since 2.1.0
    -several smartcard fixes
    -keep persistant ecm counts for clients
    -i2 emu
    -IGNORE NODE option (see CCcam.cfg)
    -emm caid tunneling
    -Added seca handler to prefer or ignore SECA2 or SECA3 (see CCcam.cfg)
    -support caid tunnelling
    -improved chid selection
    -improved system selection (based on distance). Note that prios from prio file overrule this and might give worse results
    -fixed aborting lengthy request when switching channels
    -fixed low audio pid detection
    -improved system selection
    -fixed ...... chid selection
    -dm800 detection
    -fixed minor memleak
    -fixed n2 emu freezes with static (non-openssl) version
    -improved system selection (making prio file mostly obsolete)
    -fixed camcrypt on static (non-openssl) version
    -fixed segfault reading config
    -ignore errors on emm demux (caused n2 AU to abort on certain hardware)
    -tps au fix
    -various optimizations; avoid server slowing down because of slow clients
    -global share limits (see CCcam.cfg for details)
    -global minimum required downhops setting (see CCcam.cfg for details)
    -n2 AU fix (/var/keys/ROM120.bin required)
    -cryptoworks sc fix
    -90f sc fix
    -viaccess sc emm fix
    -changed 'double client login reject' mechanism
    -G line local sharing fixed
    -graceful shutdown
    -support more than one emm listener (see CCcam.cfg for details)
    -tps au fixes
    -nds sc init fix
    -nagra fixes
    -G line remote sharing fixed
    -allow more limits in C/F/G
    -nagra fixes
    -...... camcrypt
    -tps au
    -cryptoworks keys no longer hardcoded
    -changed G: line syntax, see CCcam.cfg for details
    -multiple G: lines on the same local port supported
    -each G: line can have different localhost
    -each G: line can have different pass
    -sharing between G: lines supported
    -nagra2 MECM
    -removed gbox_indirect support
    -added gbox support
    -several smartcard fixes
    -several smartcard reader fixes
    -fixed LOADBALANCE parsing (broken in 1.7.1)
    -several smartcard fixes
    -conax ca pin support (use 'PIN:' in CCcam.cfg)
    -added SMARTCARD WRITE DELAY setting, to tweak performance on mastera/sc8in1 and such
    -moved providernames to an external file /var/etc/CCcam.providers. Format is 'hexvalue "providername" comments'
    -channelname can now be displayed in webif instead of caid:ident:sid when defined in /var/etc/CCcam.channelinfo
    -demuxapi support dropped
    -gbox indirect: reuse slots
    -avoid glitch when zapping over recorded channel (7025)
    -two cam devices on DM600
    -fixed password bug (consider using "MINIMUM CLIENT VERSION: 1.7.0" to avoid risk)
    -added viaccess smartcard emm
    -added support for gbox indirect/local connection
    -added optional ip address/hostname to F: line, no ip given allows the connection from all ip's (See CCcam.cfg for example)
    -tps au (tune to Hotbird transponder 10873 vertical)
    -added smartcard custom post-init (see CCcam.cfg) Currently only T=0 supported
    -support to override detected dvb api version
    -support sc8in1 (note: PHOENIX READER PATH --> SERIAL READER in CCcam.cfg)
    -fixed crash when reading malformed SoftCam.Key
    -fixed possible crash betacrypt smartcard emm
    -minor ...... improvements
    -added config option to avoid (hidden) chids being ignored on ...... smartcard (See CCcam.cfg)
    -added timeslots per friend connection, now possible to only open connection for a few hours (See CCcam.cfg for example)
    -Nagra emu fixes
    -fixed ...... camdata setting (setting was not used correctly in 1.6.0)
    -CCcam.prio: nagra caid:ident entries with nonzero ident now always match
    (nagra ident is unknown at time of prio check, see CCcam.cfg for details)
    -few small workarounds for buggy 7025 scidriver
    -show share (nodeid_handlerid) in
    -tps.bin support (fixed location /var/keys/tps.bin), using systemtime
    -fixed wrong ...... camdata default (since 1.4.0)
    -implemented ...... camdata setting
    -improved self learning for ......
    -fixed constant cw
    -added biss support
    -added priolist support
    -max C / F username length now 20 instead of 19
    -max C / F password length now unlimited instead of 16
    -switches to enable/disable web and telnet info info interfaces
    -implemented authentication for web and telnet info interfaces
    -Note: the web and telnet info port paramater have changed name in the config file
    -Note2: /var/keys/CCcam.ignore does not exist anymore and /var/etc/CCcam.prio is the new one
     see CCcam.cfg for details
    -improved dvb api detection (for systems with both demuxapi and dvb devicenodes)
    -avoid exit on systems that provide nonworking dvb devicenodes
    -avoid blocking on nonworking newcamd connection (since 1.4.0)
    -added column in client info output to see the ecm time per client, only available if SHOW TIMING is on
    -reworked share and provider info into tabular form
    -implemented ...... camkey setting
    -runtime dvb api version detection
    -implemented share limits on client side (just like server side), see CCcam.cfg for details
    -implemented load balancing between identical cards, see CCcam.cfg for details
    -finetuned tcp behaviour and settings, saving some network load
    -fixed newcamd connection emm
    -seca smartcard entitlements fix
    -...... smartcard emm fix
    -removed -k cmdline parm, use config file instead
    -cmdline parms could previously be overruled by rereading cfg file, fixed
    -7025: several bugfixes
    -7025: decoding of all 8 channels (1.3.0 only 4)
    -fixed viaccess smartcard
    -fixed stealth mode, also set per N line now (see CCcam.cfg)
    -fixed some 64 bits issues
    -fixed radegast provider id and nano field
    -reduced binary size
    -immediately interrupt lengthy emu calculations when zap takes place
    -userinfo was not correctly reread, therefore you needed to restart CCcam when certain parts of the userinfo changed, fixed
    -it is now possible to block a channel for a client, based on caid:id:sid see F entry config for an example
    -changed emu share limits behaviour, <1.3.0 an emu matched a F entry limit with {caid:ident:n}, for any nonzero ident. >=1.3.0, an emu only matches {caid:0:n}
    -added '-l' cmdline option, to disable all 'self-learning' stuff. This option might avoid problems with ...... smartcards
    -ports 15000-15004 and port 14000 are now gone. Use 16000 and 16001 (html) instead
    -implemented workerthread pool to handle client requests, to improve handling larger numbers of clients
    -added support for cryptoworks camcrypted cards (incl arena tv). IPK handing is internal, no need for external keys and such
    -added support for BEEF patched cards using nagra over seca tunnelling, add id's in config file(see example)
    -added conax smartcard support (ecm+emm)
    -added entitlements for cryptoworks and conax smartcards
    -allow emm one extra level
    -fixed smartcard support for some seca providers
    -fixed smartcard activation for some seca providers
    -fixed betacrypt entitlements
    -fixed betacrypt emm
    -fixed nds entitlements
    -fixed nds freeze with certain ecm on phoenix
    -...... emu emm added
    -seca emu added
    -initialise all cards before starting to decode, ensures immediate success on startup
    -restart emm when a card is inserted, for easier activation of new cards
    -faster client ecm handling (new client logon no longer delays requests of existing clients)
    -command-based info interface on port 16000
    -web info interface on port 16001
    (As of now getting info from ports 15000-15004 is deprecated. This interface will be removed in the next release.)
    -newcamd stealth mode added
    -removed <1.1.1 backward compatibility code from share protocol, to allow full use of optimisations introduced in 1.1.1
    -when CCcam was connecting to a share it kept on connecting on same ip, not very good when a dyndns address was in the config
    -ecm request cache didn't work in all situations, caching fixed and improved.
    -emm didn't always work on demuxapi systems (e.g. relook, mutant). Fixed.
    -WARNING: F: entry syntax changed, check and update your CCcam.cfg; added parameters to allow emusharing and emm, per client
    -when a share doesn't work for a certain channel, skip aliases of that share for that channel
    (aliases are the same cards shared through different routes, they have equal nodeID_shareID at the end of their line in the output on port 15002)
    -ignore '0' providerids on seca cards
    -nagra2 emu fix for some providers
    -fixed occasional nds emm freeze
    -allow multiple L: entries to connect to different cards on the same camd3 server/port
    -fixed phoenix on certain comport chipsets
    -optimized share protocol (backward compatibility with <1.1.1 guaranteed, warning, will be removed in next release)
    -camd3 support, one card per L: line
    -support to add downshare limits to F: entries
    -first public release
    -various smartcards
    -various emus
    -share2share support (C: and F: entry)
    -newcamd support (N: entry)
    -radegast support (R: entry)
    -all shares are available for clients on a single port (default 12000)
    -emu's can be shared one hop down only
    -cards can be shared multiple hops down
    -each CCcam node has a unique nodeid
    -routes to a card are given with nodelists
    -when a card is reachable through multiple routes, each unique route will be available as individual share
    -shares with nodeid 'abc' in the routelist are never sent to client with nodeid 'abc', to avoid route loops
    -watch your shares, including full routelist, on port 15002
    -start with -h to view available commandline options
    -syslog support, start with -v for more verbosity
    -start with -d to run in foreground, and log to console instead of syslog
    -inserted cards (in either available reader) start working right away
    -all used config and key files are re-read on change, never need to restart CCcam

  2. #2
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Jun 2008
    82.7° N 114.4° W
    Posts Thanks / Likes


    Deschide cardul TVR ?

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Posts Thanks / Likes


    Quote Originally Posted by ibiza View Post
    Deschide cardul TVR ?

    Punel si vezi daca deschide.

  4. #4
    Senior Member Expert
    Join Date
    Oct 2005
    Posts Thanks / Likes


    Multumiri de informare si pentru download link.

    Intotdeanua ma bucur cind apare ceva nou de testat. La-m instalat si testat e vreo 10 min.

    Se misca destul de bine. Trick 2*6 nu functioneaza.

    -several smartcard fixes < cardul ORF HD ICE = OK, TVR HD not Ok...

  5. #5
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2004
    Posts Thanks / Likes


    eu pe 3 servere pe care le detin folosesc versiunea 2.1.3 . Ce imi recomandati, sa schimb versiunea sau sa o las tot pe aceasta? De mentionat ca, cardurile pe care le detin le citesc cu sbox si oscam cu linie N in CCcam.

  6. #6
    Senior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jan 2009
    Posts Thanks / Likes


    Avand in vedere ca trick 2*6 nu functioneaza in noul cccam nu are rost sa te complici, avand carduri care apar ca local doar cu acest trick.
    Poti folosi acest nou cccam doar daca ai carduri citite direct de cccam.

  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2008
    Posts Thanks / Likes


    Quote Originally Posted by georgexx View Post
    Pune-l si vezi daca deschide.
    .................................................. .....................
    Ne mai miram de ce tara asta merge asa?omul dorea o informatie. Daca avea card Tvr sigur si-l proba.

  8. #8
    Senior Member Expert
    RDI - Board Default Avatar

    Join Date
    Sep 2007
    Posts Thanks / Likes


    dar cardul de gigel merge direct? bineinteles cu bk si rsa aferente..

    a testat cineva?
    VU+Zero4K & Solo2, Samsung ue40D7000,ue37D5700, Diablo Wifi, Offset 0,9m - 9E-13E-19E-23E, Offset 1.2m -5W , 1.2m - 36 E, Offset 0.9m - 1w

  9. #9
    timplar Expert
    Join Date
    Aug 2006
    Posts Thanks / Likes


    ia te uită ce zic niste băieţi ....

    CCCAM 2.3.0 is taking the backdoor crap even a step further.

    The lowest scum of the earth, UVADI TEAM, have done it even better this time. Making sure sharing will die for sure if they keep this crap up.

    Before I continue, I would urge people with BRAINS and PROGRAMMING SKILLS, to download IDA PRO (torrent) and decompile it for themselfs to find the fucking remotely triggered backdoor.

    How it works.

    When you install CCcam 2.3.0 , nothing special is happening at first, and cccam will check for input activity on the pc or box to make sure nobody is watching. When it finds itself comfortably alone, it will start sending your ENTIRE CCCAM.CFG info to this IP (a rented root server in germany).
    Now I recompiled a version so I could trigger the backdoor myself, and TADA, some fucking ITALIAN dialup asswipe connected to the server I just set up , IP : So traffic on my card started. THIS THEY CAN NOT HIDE in Cccam, it shows as a CONNECTED CLIENT from one of your clients in cccam.cfg where the dyndns has been removed (still lack of cccam, if dyndns is non-existing) the security feature doesn't work anymore and everybody can connect on that user.

    I have 2 words for UVADI TEAM -> YOU SUCK

    The ...ure of CCcam is dead thanks to these low life asswipes , just after free sharing and making their own "spidernetwork" on your card.

    BLOCK ALL CLIENTS that have 2.3.0 connected to your server as it will still read all connected clients from the server, trough the client

    latest original CCcam 2.1.3 and 2.1.4 which are secure and don't have this backdoor code.

    PS: AGAIN , if you don't want to take the warning for granted, decompile and look for yourself
    dm500s Vu+Zero hss1170...şî maxim şasă cai frumoşi

  10. #10
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2004
    Posts Thanks / Likes


    baietii au cam dreptate. Nu am vazut nicio imbunatatire fata de versiunile mai vechi

  11. #11
    Member Mentor
    Join Date
    Jan 2003
    Posts Thanks / Likes


    Lumea vorbeste dar nimic nu e probat. Pe toate forumurile doar copy paste. Nimic concret.
    Zvonuri au mai fost si inainte.

  12. #12
    Gold Member Expert
    RDI - Board Default Avatar

    Join Date
    Dec 2004
    Posts Thanks / Likes


    care a probat, sa imi zica si mie, concret, ce diferente exista intre 2.1.4 si ultima varianta.

    as vrea un exemplu de genu: "pe 2.3.0 merg programele si cardurile x, iar pe 2.1.4 nu merg deloc." sau "pe 2.3.0 cartelele sunt citite cu 130ms fata de 350ms."

  13. #13
    timplar Expert
    Join Date
    Aug 2006
    Posts Thanks / Likes


    ar putea fi ceva de genu ce zice baiatu asta.....

    If you look to past you see when oscam add suport cccam was info about backdore in cccam. Now gbox have new update and is posible coneckt only gbox to gbox i think person can now forced changed to gbox.
    dm500s Vu+Zero hss1170...şî maxim şasă cai frumoşi

  14. #14
    Senior Member Expert
    Join Date
    Oct 2005
    Posts Thanks / Likes


    Quote Originally Posted by scary View Post
    care a probat, sa imi zica si mie, concret, ce diferente exista intre 2.1.4 si ultima varianta.

    as vrea un exemplu de genu: "pe 2.3.0 merg programele si cardurile x, iar pe 2.1.4 nu merg deloc." sau "pe 2.3.0 cartelele sunt citite cu 130ms fata de 350ms."
    Pe cccam 2.1.3 nu merg HD+ Germany, ORF ICE
    Pe cccam 2.2.1 merge HD+ numai cel alb. Merge instabil
    Pe cccam 2.3.0 merg ambele HD+ ( alb si negru) si ORF ICE...
    Ecm ramane acelasi indiferent de versiune. Referitor la providere...
    Eu zic ca-s numai vorbe goale. Cccam2.3.0 inca nu fost eliminate de pe servere...De downlodat pentru gama de image...

    Posibil sa existe un backdoor, inplementat in toate versiunile cccam.
    Scriu din experienta mea. Cu ceva timp in urma 1-3 ani am dat linii la ccca 3-5 clienti, care nu aveau nimic in acel moment, deci numai liniile mele. Eu le-am configurat dm prin port 21...( parola default) Porturile mele inchise...Dupa ceva timp cccam.cfg a acestor clienti era stearsa alba...
    Cum s-a intamplat acest lucru Cineva a sters tot cfg, de furat nu a furat nimeni liniile. Au inchis porturile si s-a rezolvat...

  15. #15
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Dec 2009
    la tzara, langa capitala
    Posts Thanks / Likes


    mi-am luat si eu un card hd+ si testez in cateva zile ce zici...

    oricum eu tin cccam 2.3.0 -> bun si daca face ce ziceti ce naiba patesc de fapt? imi fura liniile ziceti? pai facem altele ca am deja multi prieteni cu cei cu care schimb linii



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Back to Top