Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Compilare oscam

  1. #1
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default Compilare oscam

    Se pare ca dupa problemele din ultima saptamana jumate, serverul oscam (stremaboard) s-a repus pe picioare dar inca cu probleme de dns.
    Asa ca, cine doreste sa isi compileze ultimele oscam-uri, poate folosi metoda directa pe ip:

    oscam 1.00 - stable :

    Code:
    cd /usr/src
    svn co http://77.79.4.122/svn/oscam/tags/1.00 oscam-stable1.00
    cd oscam-stable1.00
    mkdir build
    cd build
    cmake .. -DWEBIF=1
    make
    oscam 1.10 - stable :

    Code:
    cd /usr/src
    svn co http://77.79.4.122/svn/oscam/tags/1.10 oscam-stable1.10
    cd oscam-stable1.10
    mkdir build
    cd build
    cmake .. -DWEBIF=1
    make
    oscam 1.20 - unstable :
    Code:
    cd /usr/src
    svn co http://77.79.4.122/svn/oscam/trunk oscam-unstable
    cd oscam-unstable
    mkdir build
    cd build
    cmake .. -DWEBIF=1
    make
    Aici :
    https://rsp.zapto.org
    user: user
    pass: ovidiumarius

    Veti gasi compilate versiuni de oscam pentru : ASUSWL, Linux_PC, Windows_PC, RSP

  2. #2
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Noi versiuni oscam pentru :

    ASUSWL - cu DVBAPI activ
    https://rsp.zapto.org/shares/SATELIT...0_dvbapi/oscam

    DDWRT - 346 si 410 amebele cu DVBAPI activ
    https://rsp.zapto.org/shares/SATELIT..._1.10-rev.5947
    https://rsp.zapto.org/shares/SATELIT...m_1.10-rev5947

    user: user
    pass: ovidiumarius

    P.S.: Intre timp s-a rezolvat si problema cu dns-ul de la oscam - www.streamboard.gmc.to

  3. #3
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Compilare oscam pentru routere ASUSWL cu firmware tomato sau koppel :

    Code:
    				How To Compile OsCam 1.10 for ASUSWL routers
    	$ cd /usr/src
    	$ svn co http://streamboard.gmc.to/svn/oscam/tags/1.10 oscam-asuswl
    	$ cd oscam-asuswl
    Copy “openssl-0.9.8.tar.gz” on /usr/src/oscam-asuswl
    	$ tar xfvz openssl-0.9.8.tar.gz
    Copy “optware_asuswl500.tgz” & “toolchain-mips-asuswl.cmake” on /usr/src/oscamasuswl/toolchains .
    	$ cd toolchains
    	$ tar -xzvf optware_asuswl500.tgz
    	$ chmod 777 -R gcc-4.1.1-uclibc-0.9.28
    	$ cd /usr/src/oscam-asuswl
    	$ ./config.sh
    Choose “Add-ons”, “protocols”, “reader” and save.
    	$ mkdir build
    	$ cd build
    	$ vi install.sh
    		#!/bin/sh
    		export MYPATH=$PATH
    		export PATH=/usr/src/oscam-asuswl/toolchains/gcc-4.1.1-uclibc-0.9.28/bin:$MYPATH
    		cmake -DCMAKE_TOOLCHAIN_FILE=../toolchains/toolchain-mips-asuswl.cmake ..
    		make
    	$ chmod 755 install.sh
    	$ ./install.sh
    You’ll find OsCam on /usr/src/oscam-asuswl/build
    Fisierele necesare le gasiti pe serverul https://rsp.zapto.org

  4. #4
    TBD Teacher
    RDI - Board Default Avatar

    Join Date
    Jul 2008
    Location
    Pe ici pe colea...
    Posts
    254
    Posts Thanks / Likes

    Default Script pentru ubuntu

    #!/bin/sh
    mkdir cccam-user
    cd /home/cccam-user/
    rm -rf /home/cccam-user/oscam-svn/
    rm -rf /home/cccam-user/build
    svn co http://www.oscam.to/svn/oscam/trunk oscam-svn
    sleep 5
    cd oscam-svn
    sudo /home/cccam-user/oscam-svn/config.sh
    sleep 5
    mkdir build
    cd build
    cmake -DWEBIF=1 ..
    sleep 5
    make
    sleep 5
    make install
    exit 0
    Last edited by xyzzyx; 12th September 2011 at 20:38.

  5. #5
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Quote Originally Posted by xyzzyx View Post
    #!/bin/sh
    mkdir cccam-user
    cd /home/cccam-user/
    rm -rf /home/cccam-user/oscam-svn/
    rm -rf /home/cccam-user/build
    svn co http://www.oscam.to/svn/oscam/trunk oscam-svn
    sleep 5
    cd oscam-svn
    sudo /home/cccam-user/oscam-svn/config.sh
    sleep 5
    mkdir build
    cd build
    cmake -DWEBIF=1 ..
    sleep 5
    make
    sleep 5
    make install
    exit 0
    Vezi ca, cu acest script compileazi doar versiunile instabile 1.20. Daca vreti versiuni stabile trebuie compilat din tags.
    svn co http://oscam.to/svn/oscam/tags/1.10 ==> 1.10 - stable
    svn co http://oscam.to/svn/oscam/tags/1.00 ==> 1.00 - stable
    svn co http://oscam.to/svn/oscam/trunk ==> v 1.20 - unstable

    svn co http://streamboard.gmc.to/svn/oscam/tags/1.10 ==> 1.10 - stable
    svn co http://streamboard.gmc.to/svn/oscam/tags/1.00 ==> 1.00 - stable
    svn co http://streamboard.gmc.to/svn/oscam/trunk ==> v 1.20 - unstable

    svn co http://77.79.4.122/svn/oscam/tags/1.10 ==> 1.10 - stable
    svn co http://77.79.4.122/svn/oscam/tags/1.00 ==> 1.00 - stable
    svn co http://77.79.4.122/svn/oscam/trunk ==> v 1.20 - unstable

    Versiunile de pe oscam.to sunt de back-up pentru cele de pe streamboard ( streamboard care momentan nu functioneaza).

  6. #6
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    OsCam 1.10 rev.5983

    add-ons: webif, dvbapi,......_guessing, anticascading, debug, loghistory, loadbalancing
    Protocols : camd 3.3, camd 3.5 UDP, camd 3.5 TCP, newcamd, cccam, serial, constantcw
    reader : nagra, ......, conax, cyptoworks, seca, viaccess, nds, dre, tongfang

    ASUSWL & DDWRT ( config dir : /opt/cs/oscam/conf )
    DM800,DM500HD,DM8000,DM7025 ( conf dir : /usr/local/etc )

    http://www.megaupload.com/?d=JBXYQBZT

    pass: ovidiumarius

  7. #7
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Romania-Arad
    Posts
    3
    Posts Thanks / Likes

    Default Oscam Smartreader

    Sal ovidiumarius te rog frumos daca ma poti ajuta am un dm 8000 cu o cartela gigi 1880 cu readeru intern am reusit sa pornesc cartela, dar mi-am cumparat un smartreader + maxdigital cu care nu reusesc sa pornesc smartreaderu cu cartela, folosesc oscam-stable-1.10-mips-tuxbox-webif-Distribution.tar.gz, eroarea care-mi apare, ERROR you have specified protocol = smartreader in oscam.server, recompile with SmartReader support, problema ii ca nu ma stiu cu linuxul daca ma poti ajuta sa-mi recopilezi un oscam cu care merge smartreaderu pe dm 8000. multumesc

  8. #8
    Senior Member Expert
    Join Date
    Oct 2005
    Posts
    1,388
    Posts Thanks / Likes

    Default

    Quote Originally Posted by gabih36 View Post
    Sal ovidiumarius te rog frumos daca ma poti ajuta am un dm 8000 cu o cartela gigi 1880 cu readeru intern am reusit sa pornesc cartela, dar mi-am cumparat un smartreader + maxdigital cu care nu reusesc sa pornesc smartreaderu cu cartela, folosesc oscam-stable-1.10-mips-tuxbox-webif-Distribution.tar.gz, eroarea care-mi apare, ERROR you have specified protocol = smartreader in oscam.server, recompile with SmartReader support, problema ii ca nu ma stiu cu linuxul daca ma poti ajuta sa-mi recopilezi un oscam cu care merge smartreaderu pe dm 8000. multumesc
    1. Nu specifici ce image folosesti.
    La icvs GP3 trebuie instalate driverele extra pentru smargo+.
    2. Dupa explicatia ta, cardul ruleaza in unul din cele 2 sloturi interne, nu inteleg de ce vrei sa-l pui pe smargo+? Ai cumva inca 2 carduri de pus la bataie
    3. Ai configurat corect oscam.server?

    #oscam.server

    [reader]
    label = gigi
    protocol = internal
    detect = CD
    device = /dev/usb/tts/0
    group = 1
    emmcache = 1,3,2
    n3_rsakey = *********
    n3_boxkey = *********
    #mhz = 368
    #cardmhz = 368

  9. #9
    Member Mentor
    Join Date
    Jan 2003
    Posts
    725
    Posts Thanks / Likes

    Default

    @gabih36
    schimba protocol (protocol = mouse) si device corespunzator (ex.
    device = /dev/ttyUSB0)

  10. #10
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Mar 2008
    Location
    Romania-Arad
    Posts
    3
    Posts Thanks / Likes

    Default Oscam Smartreader

    Sal imagiea care o folosesc este icvs GP3 problema este ca am incercat ci cu protocolul mouse da nu mergea asa am facut serveru si as mai avea o problema nu stiu cum sa updatez cartela in dmm nu vine nici un emm la un prieten pe cartela rosie vin emm si se updateaza singur la mine nimic multumesc

    #oscam.server

    [reader]
    label = gigi
    protocol = smartreader
    device = 001:004
    caid = 1880
    rsakey = xxxxxx
    boxkey = xxxxxx
    detect = cd
    mhz = 368
    cardmhz = 368
    ident = 1880:002111,002011,002113,000000
    group = 1

    #oscam.conf

    [global]
    usrfile = /tmp/usr_oscam.log
    logfile = /tmp/oscam.log
    emmlogdir = /tmp/oscamemm.log
    disableuserfile = 0
    loghistorysize = 1024
    clienttimeout = 3500
    clientmaxidle = 336
    failbancount = 3
    cachedelay = 50
    nice = -1
    maxlogsize = 150
    preferlocalcards = 1
    saveinithistory = 1
    lb_mode = 10
    lb_reopen_seconds = 500
    lb_retrylimit = 500
    lb_savepath =
    lb_reopen_mode = 1
    [monitor]
    hideclient_to = 30
    monlevel = 0
    appendchaninfo = 0
    [newcamd]
    port = [email protected]:002111,002011,002113,000000
    key = 0102030405060708091011121314
    allowed = 127.0.0.1,192.168.0.0-192.168.255.255
    [cccam]
    port = 18001
    reshare = 1
    version = 2.1.3
    stealth = 1
    nodeid = 7ED56DEF10931586
    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    user =
    [webif]
    httpport = 8181
    httpuser = gabiar
    httppwd = gabiar
    httprefresh = 7
    httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
    httphideidleclients = 1
    [anticasc]
    enabled = 1
    numusers = 1
    aclogfile = ./tmp/oscam_ac.log
    emmcache = 1,2,6

    #oscam.user

    [account]
    user = gabiar
    pwd = gabiar
    group = 1
    uniq = 1
    au = 1
    caid = 1880
    ident = 1880:000000,002011,002111
    cccmaxhops = 0
    cccreshare = 0
    numusers = 1

    [account]
    user = dummy
    pwd = dummy
    group = 1
    uniq = 1
    au = 1
    caid = 1880
    ident = 1880:000000,002011,002111
    cccmaxhops = 0
    cccreshare = 0
    cccstealth = 0
    numusers = 1

    serveru il folosesc acum pe readeru intern configurat asa.
    #oscam.server

    [reader]
    label = gigi
    protocol = internal
    devdevice = /dev/sci0
    caid = 1880
    rsakey = xxxxxx
    boxkey = xxxxxx
    detect = cd
    mhz = 368
    cardmhz = 368
    ident = 1880:002111,002011,002113,000000
    group = 1

  11. #11
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Quote Originally Posted by gabih36 View Post
    Sal ovidiumarius te rog frumos daca ma poti ajuta am un dm 8000 cu o cartela gigi 1880 cu readeru intern am reusit sa pornesc cartela, dar mi-am cumparat un smartreader + maxdigital cu care nu reusesc sa pornesc smartreaderu cu cartela, folosesc oscam-stable-1.10-mips-tuxbox-webif-Distribution.tar.gz, eroarea care-mi apare, ERROR you have specified protocol = smartreader in oscam.server, recompile with SmartReader support, problema ii ca nu ma stiu cu linuxul daca ma poti ajuta sa-mi recopilezi un oscam cu care merge smartreaderu pe dm 8000. multumesc

    Sfaturile ce le-ai primit mai sus sunt pentru oscam folosit in mod phoenix(mouse) varianta ce nu merge foarte bine cu anumite carduri pe receptoare.

    Ai aici : http://www.megaupload.com/?d=I1MA5X2Q oscam cu suport pentru smargo pe dm8000.

    parola : ovidiumarius

  12. #12
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,460
    Posts Thanks / Likes

    Default

    cardul 1880 nu merge bine pe oscam!
    am incercat aproape tote receptoarele linux cu procesoare ,tuxbox,sh4,tuxbox mips,linux servere....dupa anumit timp crapa,sau creste ecm time f tare.
    pe ultimele sbox merge vis.
    pe caid 1802 merge f bine oscam ver stabile!
    350 kg de scule!

  13. #13
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Quote Originally Posted by gogi View Post
    cardul 1880 nu merge bine pe oscam!
    am incercat aproape tote receptoarele linux cu procesoare ,tuxbox,sh4,tuxbox mips,linux servere....dupa anumit timp crapa,sau creste ecm time f tare.
    pe ultimele sbox merge vis.
    pe caid 1802 merge f bine oscam ver stabile!
    Cardul 1880 pus pe ultimul oscam (aparut de mai bine de o luna) merge chiar foarte bine pe oscam.

  14. #14
    Member Mentor
    Join Date
    Jan 2003
    Posts
    725
    Posts Thanks / Likes

    Default

    Quote Originally Posted by ovidiumarius View Post
    Sfaturile ce le-ai primit mai sus sunt pentru oscam folosit in mod phoenix(mouse) varianta ce nu merge foarte bine cu anumite carduri pe receptoare.

    Ai aici : http://www.megaupload.com/?d=I1MA5X2Q oscam cu suport pentru smargo pe dm8000.

    parola : ovidiumarius
    Native smartreader-mode nu merge pe Dreambox. (Kernel too old; s-a mai discutat asta)
    Tu ai probat pe DM ? cred ca nu !

  15. #15
    Member Mentor
    RDI - Board Default Avatar

    Join Date
    Nov 2004
    Posts
    531
    Posts Thanks / Likes

    Default

    Pe Ubuntu, Smartmouse Bee/Serial, cu oscam compilat de ovidiumarius, oscam 5983, azi in ca. 19 ore:

    1 remote 37413 34337 91% 127.0.0.1:00000 1880 : 0
    2011/11/19 2:08:30 AABBCCDD c username (1880&000000/0400/893AE): found (387 ms) by digitv (of 1 avail 1)

    Pot confirma ce a scris ovidiumarius, de cand cu acest oscam, merge stabil.

    Numai bine

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top