Professional high-density DVB-S/DVB-S2 PCI-e card
The NetUP Dual DVB-S2-CI is a professional DVB-S/DVB-S2 PCI-e card designed for high-density appliances such as DVB-IP gateways, home theaters, satellite Internet systems, etc. In contrast to standard DVB-S cards NetUP's Dual DVB-S2-CI provides fourfold density - two DVB-S/S2 receivers and two Common Interface (CI) slots occupy only one PCI-e slot. The high density allows saving space on installation and using the card for satellite signal reception in confined environments. For example, a standard 1U rack-mount server with two PCI-e slots can receive and fully decode 4 satellite transponders, such as NetUP's IPTV Combine 4x or DVB-IP gateway 4x.
two DVB-S/DVB-S2 inputs – simultaneous reception of two DVB-S/DVB-S2 transponders;
two CI slots – independent descrambling of two transponders;
support of any professional CA modules (e.g., PowerCAM Pro, Aston Pro Solutions, etc.);
drivers for Linux OS.
Supported Modulation Types
Legacy DVB-S QPSK
DVB-S2 QPSK and 8PSK
optional: 16APSK and 32APSK
QPSK DVB-S – 1 to 47 Msymb/s
8PSK DVB-S2 – 1 to 31.5 Msymb/s (in single mode up to 63 Msymb/s)
QPSK DVB-S – 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK DVB-S2 – 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
The newest driver for Linux can be installed by the following commands:
hg clone http://linuxtv.org/hg/v4l-dvb/
make && make install
The card was awarded as «The best PC card we ever tested» by the TELE-satellite magazine.
Read more in the TELE-satellite's test report.