Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 10 of 10

Thread: SkyDe+TvrHd

  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Germany
    Posts
    159
    Posts Thanks / Likes

    Default SkyDe+TvrHd

    As avea nevoie de ajutor daca se poate. Urmatoarea problema:
    pe un Dm800 cu Oozzon 1.5 in flash si Gp 4.7, cccam2.1.3/oscam 0.99.4. Cardul Sky e intern si Tvr e in smargo. Cardul din smargo nu il citeste. Dm-ul recunoaste smargo. Am testat sky pe smargo cu cccam2.1.3 si il citeste. SERIAL READER : /dev/usb/tts/0 smartreader+ e activ. Am incercat ambele carduri numai cu oscam sa vad daca deschide, fara succes. Rog pe cei care au acesta combinatie sau cei care stiu sa spuna ce image folosesc si sa posteze configul ptr. oscam

    Multumesc

  2. #2
    Silver Member Expert
    Join Date
    May 2002
    Posts
    2,364
    Posts Thanks / Likes

    Default

    Posteaza config si eventual un log ca sa vedem ce e !
    Incearca alte setari pe smargo.
    Ce protocol folosesti? Mouse sau smartreader?

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Germany
    Posts
    159
    Posts Thanks / Likes

    Default

    Pun aici oscam config si log. Cu acest config am testat sa vad daca se face lumina. Vreau sa mentionez ca deschide cardul tvr pe dream (binenteles internal//dev/sci0). Pe smargo am incercat mouse si smartreader (vezi log) Inca o precizare; am testat smargo cu skyde.Din cccam deschide(deci e ok si smargo) din oscam nu. Aceeasi poveste ca tvr.

    Oscam conf:
    [global]
    pidfile = /tmp/oscam.pid
    logfile = /tmp/stdout
    cwlogdir = /tmp
    logfile = /var/log/oscam.log
    disablelog = 0
    disableuserfile = 0
    usrfileflag = 0
    clienttimeout = 5000
    fallbacktimeout = 2500
    clientmaxidle = 120
    cachedelay = 0
    bindwait = 120
    netprio = 0
    clientdyndns = 1
    resolvedelay = 30
    unlockparental = 0
    nice = 20
    serialreadertimeout = 1500
    maxlogsize = 50
    waitforcards = 0
    preferlocalcards = 0
    saveinithistory = 1
    readerrestartseconds = 5
    readerautoloadbalance = 0
    readerautoloadbalance_save = 0

    [monitor]
    port = 988
    nocrypt = 192.168.1.100-192.168.2.200
    aulow = 120
    hideclient_to = 0
    monlevel = 4
    appendchaninfo = 0

    [newcamd]
    port = [email protected]:025900
    key = 0102030405060708091011121314
    allowed =
    keepalive = 1
    mgclient = 0

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = dreambox
    user = card
    priority =
    ignore =
    cw_delay =

    [webif]
    httpport = 8888
    httpuser = gmx250
    httppwd = 1361
    httpcss =
    httptpl =
    httpscript =
    httprefresh = 10
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    httpdyndns =
    httphideidleclients = 1
    httpreadonly = 0

    Oscam server:
    [reader]
    label = tvrhd
    enable = 1
    protocol = mouse
    device = /dev/usb/tts/0
    services =
    caid = 0500&FFFF
    detect = cd
    mhz = 500
    cardmhz = 357
    ident = 0000:FFF720,025900,025910
    group = 1
    emmcache = 1,3,2
    ecmcache = 1
    lb_weight = 100

    Oscam user:
    #user newcamd-card tvr#
    [account]
    User = tvrhd
    Pwd = tvrhd
    group = 1
    services = 1
    au = TVRHD
    caid = 500:000000
    ident= FFF720, 025900, 025910

    #user dvb-api#
    [account]
    User = card
    Pwd = card
    Group = 1
    keepalive = 1

    Log:
    >> OSCam << cardserver started at Sun Oct 3 15:07:28 2010
    -------------------------------------------------------------------------------
    2010/10/03 15:07:28 3724 s version=0.99.4svn, build #2570, system=mips-tuxbox-linux, nice=20
    2010/10/03 15:07:28 3724 s max. clients=29, client max. idle=120 sec
    2010/10/03 15:07:28 3724 s max. logsize=50 Kb
    2010/10/03 15:07:28 3724 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2010/10/03 15:07:28 3724 s shared memory initialized (size=493350, fd=5)
    2010/10/03 15:07:28 3724 s auth size=4756
    2010/10/03 15:07:28 3724 s services reloaded: 0 services freed, 2 services loaded
    2010/10/03 15:07:29 3724 s userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
    2010/10/03 15:07:29 3724 s signal handling initialized (type=sysv)
    2010/10/03 15:07:29 3724 s 4 service-id's loaded
    2010/10/03 15:07:29 3724 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
    2010/10/03 15:07:29 3724 s 0 lengths for caid guessing loaded
    2010/10/03 15:07:29 3724 s monitor: initialized (fd=9, port=98
    2010/10/03 15:07:29 3724 s camd 3.3x: disabled
    2010/10/03 15:07:29 3724 s camd 3.5x: disabled
    2010/10/03 15:07:29 3724 s cs378x: disabled
    2010/10/03 15:07:29 3724 s newcamd: initialized (fd=10, port=34000, crypted)
    2010/10/03 15:07:29 3724 s CAID: 0500
    2010/10/03 15:07:29 3724 s provid #0: 025900
    2010/10/03 15:07:29 3724 s cccam: disabled
    2010/10/03 15:07:29 3724 s radegast: disabled
    2010/10/03 15:07:29 3724 s client resolver thread started
    2010/10/03 15:07:29 3724 s logger started (pid=3726)
    2010/10/03 15:07:29 3724 s resolver thread started
    2010/10/03 15:07:29 3724 s http started (pid=372
    2010/10/03 15:07:29 3724 s reader started (pid=3729, device=/dev/usb/tts/0, detect=cd, mhz=500, cardmhz=357)
    2010/10/03 15:07:29 3724 s anti cascading disabled
    2010/10/03 15:07:29 3724 s dvbapi: initialized (pid=3730)
    2010/10/03 15:07:29 3728 h HTTP Server listening on port 8888
    2010/10/03 15:07:29 3730 c01 plain dvbapi-client 127.0.0.1 granted (card, au=0)
    2010/10/03 15:07:31 3729 r02 card detected
    2010/10/03 15:07:31 3730 c01 dvbapi: new program number: 000F (TVRHD)
    2010/10/03 15:07:32 3730 c01 card (0500&024F00/000F/34:F10F): rejected group (1 ms)
    2010/10/03 15:07:32 3724 s client(2) connect from 84.153.66.24 (pid=3731, pipfd=17)
    2010/10/03 15:07:32 3731 c02 encrypted newcamd:34000-client 84.153.66.24 granted (card, au=0)
    2010/10/03 15:07:32 3731 c02 user card authenticated successfully (CCcam)
    2010/10/03 15:07:32 3731 c02 AU disabled for user card
    2010/10/03 15:07:37 3730 c01 card (0500&025900/000F/6B:F6D0): timeout (5200 ms)
    2010/10/03 15:07:37 3730 c01 card (0500&022F00/000F/34:1F49): rejected group (0 ms)
    2010/10/03 15:07:37 3730 c01 card (0500&024F00/000F/34:F10E): rejected group (0 ms)
    2010/10/03 15:07:42 3730 c01 card (0500&025900/000F/6B:F6D1): timeout (5200 ms)
    2010/10/03 15:07:42 3729 r02 Error activating card.
    2010/10/03 15:07:46 3730 c01 card (0500&022F00/000F/34:2982): rejected group (0 ms)
    2010/10/03 15:07:47 3730 c01 card (0500&024F00/000F/34:4BB9): rejected group (0 ms)
    2010/10/03 15:07:52 3730 c01 card (0500&025900/000F/6B:F6D0): timeout (5002 ms)
    2010/10/03 15:07:53 3729 r02 Error activating card.
    2010/10/03 15:07:54 3724 s client(3) connect from 84.153.66.24 (pid=3733, pipfd=1
    2010/10/03 15:07:54 3733 c03 user chrisw is trying to connect but doesnt exist ! (CCcam)
    2010/10/03 15:07:54 3733 c03 plain newcamd-client 84.153.66.24 rejected (no such user)
    2010/10/03 15:07:56 3730 c01 card (0500&022F00/000F/34:2983): rejected group (0 ms)
    2010/10/03 15:07:56 3730 c01 dvbapi: can't decode channel
    2010/10/03 15:08:05 3729 r02 Error activating card.
    2010/10/03 15:08:08 3724 s client(3) connect from 84.153.66.24 (pid=3734, pipfd=1
    2010/10/03 15:08:08 3734 c03 user chrisw is trying to connect but doesnt exist ! (CCcam)
    2010/10/03 15:08:08 3734 c03 plain newcamd-client 84.153.66.24 rejected (no such user)
    2010/10/03 15:08:09 3729 r02 ATR is malformed, it reports 14 historical bytes but there are only -1

    -------------------------------------------------------------------------------
    >> OSCam << cardserver started at Sun Oct 3 15:09:41 2010
    -------------------------------------------------------------------------------
    2010/10/03 15:09:41 3750 s version=0.99.4svn, build #2570, system=mips-tuxbox-linux, nice=20
    2010/10/03 15:09:41 3750 s max. clients=29, client max. idle=120 sec
    2010/10/03 15:09:41 3750 s max. logsize=50 Kb
    2010/10/03 15:09:41 3750 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
    2010/10/03 15:09:41 3750 s shared memory initialized (size=493350, fd=5)
    2010/10/03 15:09:41 3750 s auth size=4756
    2010/10/03 15:09:41 3750 s services reloaded: 0 services freed, 2 services loaded
    2010/10/03 15:09:41 3750 s userdb reloaded: 0 accounts freed, 2 accounts loaded, 0 expired, 0 disabled
    2010/10/03 15:09:41 3750 s signal handling initialized (type=sysv)
    2010/10/03 15:09:41 3750 s 4 service-id's loaded
    2010/10/03 15:09:41 3750 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
    2010/10/03 15:09:41 3750 s 0 lengths for caid guessing loaded
    2010/10/03 15:09:41 3750 s monitor: initialized (fd=9, port=98
    2010/10/03 15:09:41 3750 s camd 3.3x: disabled
    2010/10/03 15:09:41 3750 s camd 3.5x: disabled
    2010/10/03 15:09:41 3750 s cs378x: disabled
    2010/10/03 15:09:41 3750 s newcamd: initialized (fd=10, port=34000, crypted)
    2010/10/03 15:09:41 3750 s CAID: 0500
    2010/10/03 15:09:41 3750 s provid #0: 025900
    2010/10/03 15:09:41 3750 s cccam: disabled
    2010/10/03 15:09:41 3750 s radegast: disabled
    2010/10/03 15:09:41 3750 s client resolver thread started
    2010/10/03 15:09:41 3750 s logger started (pid=3752)
    2010/10/03 15:09:41 3750 s resolver thread started
    2010/10/03 15:09:41 3750 s http started (pid=3754)
    2010/10/03 15:09:41 3750 s reader started (pid=3755, device=/dev/usb/tts/0, detect=cd, mhz=500, cardmhz=357)
    2010/10/03 15:09:41 3754 h HTTP Server listening on port 8888
    2010/10/03 15:09:41 3750 s anti cascading disabled
    2010/10/03 15:09:41 3750 s dvbapi: initialized (pid=3756)
    2010/10/03 15:09:41 3755 r02 Wrong device format (/dev/usb/tts/0), it should be Device=bus:dev
    2010/10/03 15:09:41 3755 r02 Cannot open device: /dev/usb/tts/0
    2010/10/03 15:09:42 3756 c01 plain dvbapi-client 127.0.0.1 granted (card, au=0)

    Multumesc celor care se vor implica.

  4. #4
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Intr-o prima faza ai
    logfile = /tmp/stdout

    cwlogdir = /tmp

    logfile = /var/log/oscam.log

    pentru inceput nu inteleg de ce ai setat de 2 ori locatia pentru log file (si fisierul stdout si oscam.log) apoi cwlog nu isi are rostul sa fie setat pentru ca doar incarca sistemul si crapa totul.
    In oscam.server ai setat cardul pe 500 mhz setare prin care ai toate sansele sa arzi cardul.
    Mai ai setat si restul provid-urilor de pe card care nu deschid nimic ...
    Smargo il ai pus in mod smartreader iar configul l-ai facut pentru mod phoenix ...

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Germany
    Posts
    159
    Posts Thanks / Likes

    Default

    de 2 ori log a fost doar provizoriu. Cardul e acum asa setat:
    ################## TVR Hd card ########################
    [reader]
    label = tvrhd
    protocol = mouse
    device = /dev/usb/tts/0
    detect = CD
    emmcache = 1,3,2
    group = 2
    services = tvrhd
    caid = 0500
    mhz = 357
    cardmhz = 357

    setarile ptr smartreader cum sint?

  6. #6
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,527
    Posts Thanks / Likes

    Default

    Quote Originally Posted by Levi View Post
    de 2 ori log a fost doar provizoriu. Cardul e acum asa setat:
    ################## TVR Hd card ########################
    [reader]
    label = tvrhd
    protocol = mouse
    device = /dev/usb/tts/0
    detect = CD
    emmcache = 1,3,2
    group = 2
    services = tvrhd
    caid = 0500
    mhz = 357
    cardmhz = 357

    setarile ptr smartreader cum sint?
    2010/10/03 15:09:41 3755 r02 Wrong device format (/dev/usb/tts/0), it should be Device=bus:dev

    Deci BUSEV

    ex: 001:001 ; 001:002; ... ; 002:003 ....

  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Germany
    Posts
    159
    Posts Thanks / Likes

    Default

    Ok...si cum aflu device nr. ? Am citit si pe alte forumuri. Sunt probleme cu smargo... E cineva cara are un card skyde sau tvr si smargo citeste?

    Am gasit in BP la Cam Plugins Smargo util. Cica determina bus si device nr. Dar cum,cum folosesc acest tool?

  8. #8
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Germany
    Posts
    159
    Posts Thanks / Likes

    Default

    Am gasit Device nr. Problema e urmatoarea:

    2010/10/03 19:40:48 1835 s http started (pid=1839)
    2010/10/03 19:40:48 1835 s reader started (pid=1840, device=002:002, detect=cd, mhz=600, cardmhz=600)
    2010/10/03 19:40:48 1835 s waiting for local card init
    2010/10/03 19:40:48 1839 h HTTP Server listening on port 8888
    2010/10/03 19:40:48 1840 r02 Found smartreader device 002:002
    2010/10/03 19:40:48 1840 r02 card detected
    2010/10/03 19:40:58 1840 r02 usb bulk write failed : ret = -7
    2010/10/03 19:41:08 1840 r02 usb bulk write failed : ret = -7
    2010/10/03 19:41:19 1840 r02 usb bulk write failed : ret = -7
    2010/10/03 19:41:29 1840 r02 usb bulk write failed : ret = -7

    Am testat doar cu oscam si skyde. Vroiam sa stiu daca citeste cardul.
    Referitor la: 2010/10/03 19:41:29 1840 r02 usb bulk write failed : ret = -7

    am citit pe Ihad ca ar fi o problema la DM800/8000 de Kernel care face probleme cu usb.
    aici: http://www.i-have-a-dreambox.com/wbb...ht=smargo+util
    ce solutie ar fi?

  9. #9
    Silver Member Expert
    Join Date
    May 2002
    Posts
    2,364
    Posts Thanks / Likes

    Default

    Cred ca nu exista solutie, altfel ar fi fost postat pe forumul lor.
    Mergi pe protocol mouse cu setarile pt. oscam.server ce ti le-am dat pe PM.

  10. #10
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    May 2004
    Location
    Germany
    Posts
    159
    Posts Thanks / Likes

    Default

    Nu vrea...
    Nu e nimeni cu smargo pe DM800?

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top