Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 8 of 8
  1. #1
    Member Teacher
    Join Date
    Oct 2003
    Location
    Göteborg
    Posts
    246
    Posts Thanks / Likes

    Default oscam-cccam script?

    buna!
    am primit ieri noua cartela de la viasat si am reusit cu greu sa o configurez sa deschida in dream programele viasat.Azi dimineatza am vrut sa schimb o linie C cu cineva care are DIGI TV si nu vede nimic de la mine,in schimb eu vad tot de la el si si din cardul meu.Am ajuns la concluzia ca ceva nu este bine configurat bine la mine.Poate cineva sa ma ajute cu o configuratie pt scriptul oscam-cccam?(un cccamconfig si un oscam config.)v-as fi foarte recunosactor pt ori ce idee.
    am uitat sa precizez ca am Dreambox 7020s imagine gemini 4.60
    dar imaginea se poate schimba.
    o zi buna!

  2. #2
    Senior Member Expert
    Join Date
    Apr 2006
    Posts
    1,275
    Posts Thanks / Likes

    Default

    Quote Originally Posted by marcel View Post
    buna!
    nu vede nimic de la mine,in schimb eu vad tot de la el si si din cardul meu.
    o zi buna!
    verifica daca ai portul pentru share deschis din router sau daca a facut au dyndns ....

  3. #3
    Member Teacher
    Join Date
    Oct 2003
    Location
    Göteborg
    Posts
    246
    Posts Thanks / Likes

    Default

    portul e deschis!
    dyndns-ul e ok.am fost pina ieri pe gbox cu el.
    nici nu mai stiu ce sa zic

  4. #4
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,529
    Posts Thanks / Likes

    Default

    Posteaza setarile oscam ce le ai in receptor sa vedem unde ar putea fi buba.
    Oscam.conf
    Oscam.server
    Oscam.user
    Oscam.services - pentru asta trebuie scoase sid-urile pentru toate canalele ce se pot deschide cu respectivul card; avand aceasta setare cardul va functiona foarte bine nefiind prea solicitat ==> doar ecm OK.
    Si bineinteles trebuie sa te hotarasti ce anume vrei sa faci cu oscam pentru ca din el poti la fel de bine sa dai doar in cccam-ul tau linii N sau il poti folosi si ca server de cccam si newcamd concomitent linii N si C pentru tine si alti clienti.

  5. #5
    Member Teacher
    Join Date
    Oct 2003
    Location
    Göteborg
    Posts
    246
    Posts Thanks / Likes

    Default

    aici sint setarile:
    oscam.config

    Code:
    #
    # main configuration
    #
    
    [global]
    nice          = -1
    WaitForCards  = 1
    
    # logging
    
    pidfile          = /var/run/oscam.pid
    logfile          = /var/log/oscam/oscam.log
    usrfile          = /var/log/oscam/oscamuser.log
    cwlogdir      = /var/log/oscam/cw
    
    # monitor
    
    [monitor]
    port          = 988
    aulow          = 120
    monlevel      = 1
    
    # web interface
    
    [webif]
    httpport      = 8888
    httpuser      = myusername
    httppwd       = mypassword
    
    # protocols
    
    [newcamd]
    key           = 000102030405060708090A0B0C0D
    port          = [email protected]:FFFFFF;[email protected]:FFF000,FFFF00;[email protected]:FFFFFF
    
    [radegast]
    port          = 19000
    user          = user1
    allowed       = 192.168.0.0-192.168.255.255
    
    [cs378x]
    port          = [email protected]:FFFFFF;[email protected]:FFF000,FFFF00;[email protected]:FFFFFF
    
    [cccam]
    port          = 19000
    version       = 1.2.3
    build         = 1234
    reshare       = 2
    
    [gbox]
    password      = password1
    maxdist       = 4
    cardinfos     = card.infos
    ignorelist    = ignore.list
    onlineinfos   = online.infos
    locals        = 01000000,02000000,0300FFFF
    
    [serial]
    device        = [email protected]/dev/ttyS0?delay=1&timeout=300
    
    [dvbapi]
    enabled          = 1
    user          = user1
    demux         = /dev/dvb/adapter0/demux0
    ca            = /dev/dvb/adapter0/ca1
    socket        = /tmp/camd.socket
    oscam.server:

    Code:
    #
    # reader configuration
    #
    
    # serial reader
    
    #[reader]
    #label    = reader1
    #protocol = mouse
    #detect   = CD
    #device   = /dev/ttyS0
    #group    = 1
    #emmcache = 1,3,2
    #services = services1
    #caid     = 0100
    
    # USB serial reader
    
    #[reader]
    #label    = reader2
    #protocol = mouse
    #detect   = CD
    #device   = /dev/ttyUSB0
    #aeskey   = 000102030405060708090A0B0C0D0E0F
    #group    = 2
    #emmcache = 1,3,2
    #services = services2
    #caid     = 0200
    
    # remote newcamd reader with fallback for group 1
    
    #[reader]
    #label    = remote1
    #protocol = newcamd
    #key      = 0102030405060708091011121314
    #device   = 192.168.0.2,66666
    #account  = login1,password1
    #group    = 1
    #fallback = 1
    
    # remote camd 3.78x reader with fallback for group 2
    
    #[reader]
    #label    = remote2
    #protocol = cs378x
    #device   = 192.168.0.3,23456
    #account  = login2,password2
    #group    = 2
    #fallback = 1
    
    # remote gbox reader 
    
    #[reader]
    #label    = remote3
    #protocol = gbox
    #device   = 192.168.0.4,34567,45678
    #account  = login3,password3
    #group    = 3
    #caid     = 0300
    
    # remote CCcam reader
    
    #[reader]
    #label      = remote4
    #protocol   = cccam
    #device     = 192.168.0.5,45678
    #account    = login4,password4
    #group      = 4
    #caid       = 0400
    #cccversion = 1.2.34
    #cccbuild   = 5678
    
    # remote radegast reader
    
    #[reader]
    #label    = remote5
    #protocol = radegast
    #device   = 192.168.0.6,56789
    #group    = 5
    #caid     = 0500
    
    # PCSC reader
    
    #[reader]
    #label    = mypcscreader
    #protocol = pcsc
    #device   = 0
    #aeskey   = 0102030405060708090a0b0c0d0e0f10
    #group    = 6
    #caid     = 0600
    
    # Smargo Smartreader+
    
    #[reader]
    #label    = mysmartreader
    #protocol = smartreader
    #device   = 001:002
    #aeskey   = 0102030405060708090a0b0c0d0e0f10
    #group    = 7
    #caid     = 0700
    
    # internal reader
    
    [reader]
    Label = Viasat
    Protocol = internal
    Detect = cd
    Device = /dev/sci0
    mhz = 357
    EMMCache = 1,1,2
    Group = 1
    CAID = 093E
    BoxID = 0D0EB88A
    oscam services

    Code:
    #
    # definition of services 
    #
    # format:
    # [name]
    # caid=CAID[,CAID]...
    # provid = provider ID[,provider ID]...
    # srvid = service ID[,service ID]...
    
    #[services1]
    #caid=0100
    #provid=000001,ABCDEF
    #srvid=0001,0002,000A,000B
    
    #[services2]
    #caid=0200
    #srvid=0003,0004,000C,000D
    oscam user
    
    #
    # user configuration
    #
    [account]
    user = marcell
    pwd = 12345678
    group = 1
    uniq = 1
    caid = 093E
    ident = 093E:000000
    AU = Viasat
    monlevel = 0
    
    # user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled
    
    #[account]
    #user       = user1
    #pwd        = password1
    #monlevel   = 0
    #uniq       = 1
    #group      = 1
    #au         = reader1
    #services   = services1
    #betatunnel = 0300.FFFF:0100,0400.FFFF:0100
    #ident        = 0100:000000
    #caid       = 0100
    
    # user for group 2 with monitor access, AU enabled
    
    #[account]
    #user       = user2
    #pwd        = password2
    #monlevel   = 1
    #uniq       = 0
    #group      = 2
    #au         = reader2
    #services   = services2
    #ident        = 0200:000000
    #caid       = 0200
    
    # user for group 2 without monitor access, AU disabled, account disabled
    
    #[account]
    #user       = user3
    #pwd        = password3
    #disabled   = 1
    #group      = 2
    #services   = services2
    #ident        = 0200:000000
    #caid       = 0200
    
    # user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents
    
    #[account]
    #user       = user4
    #pwd        = password4
    #monlevel   = 0
    #uniq       = 1
    #group      = 3
    #ident        = 0300:000000,FFFFFF;0400:FFFFFF
    #caid       = 0300

  6. #6
    Moderator Expert
    Join Date
    Apr 2003
    Location
    Wild West
    Posts
    2,529
    Posts Thanks / Likes

    Default

    Quote Originally Posted by marcel View Post
    aici sint setarile:
    oscam.config

    #
    # main configuration
    #

    [global]
    nice = -1
    WaitForCards = 1

    # logging

    pidfile = /var/run/oscam.pid
    logfile = /var/log/oscam/oscam.log
    usrfile = /var/log/oscam/oscamuser.log
    cwlogdir = /var/log/oscam/cw

    # monitor

    [monitor]
    port = 988
    aulow = 120
    monlevel = 1

    # web interface

    [webif]
    httpport = 8888
    httpuser = myusername
    httppwd = mypassword

    # protocols

    [newcamd]
    key = 000102030405060708090A0B0C0D
    port = [email protected]:FFFFFF;[email protected]:FFF000,FFFF00;[email protected] 300:FFFFFF

    [radegast]
    port = 19000
    user = user1
    allowed = 192.168.0.0-192.168.255.255

    [cs378x]
    port = [email protected]:FFFFFF;[email protected]:FFF000,FFFF00;[email protected] 300:FFFFFF

    [cccam]
    port = 19000
    version = 1.2.3
    build = 1234
    reshare = 2

    [gbox]
    password = password1
    maxdist = 4
    cardinfos = card.infos
    ignorelist = ignore.list
    onlineinfos = online.infos
    locals = 01000000,02000000,0300FFFF

    [serial]
    device = [email protected]/dev/ttyS0?delay=1&timeout=300

    [dvbapi]
    enabled = 1
    user = user1
    demux = /dev/dvb/adapter0/demux0
    ca = /dev/dvb/adapter0/ca1
    socket = /tmp/camd.socket

    oscam.server:

    #
    # reader configuration
    #

    # serial reader

    #[reader]
    #label = reader1
    #protocol = mouse
    #detect = CD
    #device = /dev/ttyS0
    #group = 1
    #emmcache = 1,3,2
    #services = services1
    #caid = 0100

    # USB serial reader

    #[reader]
    #label = reader2
    #protocol = mouse
    #detect = CD
    #device = /dev/ttyUSB0
    #aeskey = 000102030405060708090A0B0C0D0E0F
    #group = 2
    #emmcache = 1,3,2
    #services = services2
    #caid = 0200

    # remote newcamd reader with fallback for group 1

    #[reader]
    #label = remote1
    #protocol = newcamd
    #key = 0102030405060708091011121314
    #device = 192.168.0.2,66666
    #account = login1,password1
    #group = 1
    #fallback = 1

    # remote camd 3.78x reader with fallback for group 2

    #[reader]
    #label = remote2
    #protocol = cs378x
    #device = 192.168.0.3,23456
    #account = login2,password2
    #group = 2
    #fallback = 1

    # remote gbox reader

    #[reader]
    #label = remote3
    #protocol = gbox
    #device = 192.168.0.4,34567,45678
    #account = login3,password3
    #group = 3
    #caid = 0300

    # remote CCcam reader

    #[reader]
    #label = remote4
    #protocol = cccam
    #device = 192.168.0.5,45678
    #account = login4,password4
    #group = 4
    #caid = 0400
    #cccversion = 1.2.34
    #cccbuild = 5678

    # remote radegast reader

    #[reader]
    #label = remote5
    #protocol = radegast
    #device = 192.168.0.6,56789
    #group = 5
    #caid = 0500

    # PCSC reader

    #[reader]
    #label = mypcscreader
    #protocol = pcsc
    #device = 0
    #aeskey = 0102030405060708090a0b0c0d0e0f10
    #group = 6
    #caid = 0600

    # Smargo Smartreader+

    #[reader]
    #label = mysmartreader
    #protocol = smartreader
    #device = 001:002
    #aeskey = 0102030405060708090a0b0c0d0e0f10
    #group = 7
    #caid = 0700

    # internal reader

    [reader]
    Label = Viasat
    Protocol = internal
    Detect = cd
    Device = /dev/sci0
    mhz = 357
    EMMCache = 1,1,2
    Group = 1
    CAID = 093E
    BoxID = 0D0EB88A

    oscam services

    #
    # definition of services
    #
    # format:
    # [name]
    # caid=CAID[,CAID]...
    # provid = provider ID[,provider ID]...
    # srvid = service ID[,service ID]...

    #[services1]
    #caid=0100
    #provid=000001,ABCDEF
    #srvid=0001,0002,000A,000B

    #[services2]
    #caid=0200
    #srvid=0003,0004,000C,000D
    oscam user

    #
    # user configuration
    #
    [account]
    user = marcell
    pwd = 12345678
    group = 1
    uniq = 1
    caid = 093E
    ident = 093E:000000
    AU = Viasat
    monlevel = 0

    # user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled

    #[account]
    #user = user1
    #pwd = password1
    #monlevel = 0
    #uniq = 1
    #group = 1
    #au = reader1
    #services = services1
    #betatunnel = 0300.FFFF:0100,0400.FFFF:0100
    #ident = 0100:000000
    #caid = 0100

    # user for group 2 with monitor access, AU enabled

    #[account]
    #user = user2
    #pwd = password2
    #monlevel = 1
    #uniq = 0
    #group = 2
    #au = reader2
    #services = services2
    #ident = 0200:000000
    #caid = 0200

    # user for group 2 without monitor access, AU disabled, account disabled

    #[account]
    #user = user3
    #pwd = password3
    #disabled = 1
    #group = 2
    #services = services2
    #ident = 0200:000000
    #caid = 0200

    # user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents

    #[account]
    #user = user4
    #pwd = password4
    #monlevel = 0
    #uniq = 1
    #group = 3
    #ident = 0300:000000,FFFFFF;0400:FFFFFF
    #caid = 0300
    Din ce ai postat tu aici rezulta o varza totala.
    In oscam.conf ai setate toate protocoalele pe cand tie iti trebuiesc maxim 2.
    Oscam.services nu e setat deloc ...
    Trebuie sa te hotarasti ce vrei sa faci cu acest oscam si in functie de asta sa alegi ce protocol vrei sa folosesti in oscam.conf.

  7. #7
    Junior Member Teacher
    Join Date
    Jun 2007
    Location
    26.12°E / 44.42°N
    Posts
    473
    Posts Thanks / Likes

    Default

    Quote Originally Posted by marcel View Post
    portul e deschis!
    dyndns-ul e ok.am fost pina ieri pe gbox cu el.
    nici nu mai stiu ce sa zic
    nu stiu cum este setat routerul tau, dar forwarding-ul se face pe protocol diferit (corect ar fi acum tcp)

  8. #8
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Mar 2010
    Location
    Botosani
    Posts
    18
    Posts Thanks / Likes

    Default oscam-cccam card d0lce

    Am o problema cu cardul d0lce si aceea ca prneste foarte greu in oscam iar apoi daca urmaresc un program mai mult timp il deschide din hop1. Am activat dvbapi si merge de minune dar pierd clientii....
    Rog pe cineva care poate sa ma ajute sa fac setarile optime pentru a functiona catdecat norma......

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top