Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 5 of 5

Thread: sid nova

  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Location
    atena
    Posts
    116
    Posts Thanks / Likes

    Default sid nova

    cine poate sa ma ajute pe cccam sa opresc sid si sa vad nu mai 4 canale de pe cardul meu nova ..merci mult
    Last edited by faaaa; 3rd July 2010 at 14:05.

  2. #2
    Non Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2008
    Location
    Cluj-Napoca
    Posts
    185
    Posts Thanks / Likes

    Default

    # Configure limited list of accepted sids for smartcard
    # When omitted, all sids are allowed.
    # (can work together with LOADBALANCE configuration, or for standalone cards)
    #
    # SMARTCARD SID ASSIGN : <device> <maxnumberofsids> { <sid1>, <sid2>, ... <sidn> }
    #
    # <device> is the reader devicenode
    # <maxnumberofsids> limits the total number of sids assigned to the card (0 = use length of sid list)
    # { <sid1>..<sidn> } lists the sids that are assigned to the smartcard, when omitted, <maxnumberofsids> is used to auto assign sids
    #
    # when <maxnumberofsids> is larger than the length of the sidlist, the remainder of the sids are auto assigned, till the list reaches <maxnumberofsids>
    # Check entitlement output for realtime assignment list
    #
    # WARNING: when SMARTCARD SID ASSIGN config changes, restart is required before settings take effect
    #
    #example1: smartcard in device /dev/ttyUSB0 only handles requests for sids df3, df4, df5
    #
    # SMARTCARD SID ASSIGN : /dev/ttyUSB0 0 { 0df3,0df4,0df5 }
    #
    #example2: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, auto assigned in the order of occurance. A request for a 6th sid will be denied.
    #
    # SMARTCARD SID ASSIGN : /dev/ttyUSB0 5
    #
    #example3: smartcard in device /dev/ttyUSB0 handles requests for max 5 sids, 3 of which are df3, df4, df5, remaining 2 are auto assigned
    #
    # SMARTCARD SID ASSIGN : /dev/ttyUSB0 5 { 0df3,0df4,0df5 }

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Location
    atena
    Posts
    116
    Posts Thanks / Likes

    Default

    am incercat dar nu stiu unde sa pun sidul in care optiune merci mult si scuze

  4. #4
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Location
    atena
    Posts
    116
    Posts Thanks / Likes

    Default

    SMARTCARD SID ASSIGN: /dev/sci0 0 { 013d,1d53,1bc2,0161 }


    asa este bine sau trebuie sa mai fac ceva merci mult

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Feb 2007
    Location
    atena
    Posts
    116
    Posts Thanks / Likes

    Default

    am reusit merci mult

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top