Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 3 of 3
  1. #1
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,462
    Posts Thanks / Likes

    Default smargo pe debian,m-a disperat!

    [ 405.157130] ftdi_sio 5-4.3:1.0: FTDI USB Serial Device converter detected
    [ 405.157176] ftdi_sio: Detected FT232BM
    [ 405.157239] usb 5-4.3: FTDI USB Serial Device converter now attached to ttyUSB0
    [ 405.158784] usb 5-4.3: New USB device found, idVendor=0403, idProduct=6001
    [ 405.158784] usb 5-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 405.329314] usb 5-4.3: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
    [ 405.329314] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
    [ 405.329314] ftdi_sio 5-4.3:1.0: device disconnected

    nu vrea sa stea conectat
    am incercat toate variantele posibile,cu hub,fara,configu din bios,cfg din /etc/.......
    o sugestie ceva
    este un comp de birou HP,transformat in server linux.
    350 kg de scule!

  2. #2
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Arunca-ti un ochi pe brltty, de acolo apare problema. Eventual dezinstaleaza-l ... e suportul pentru orbi, sper ca nu ai nevoie de asa ceva

  3. #3
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,462
    Posts Thanks / Likes

    Default

    rezolvase-m deja cand am vazut postul tau.
    de acolo era
    dar am decomentat linile astea si am adaugat seralul si device-ul
    # The braille-device directive specifies the device to which the braille
    # display is connected. The generic syntax is type:device. The device
    # type is optional, and, for backward compatibility, defaults to serial.
    # The following devices are supported (brackets indicate optionality):
    # serialath (relative paths are anchored at "/dev")
    # usb:[serial-number]
    # bluetooth:address
    # If not specified, "usb:" will be used.
    # (can be overridden with the -d [--braille-device=] option)
    braille-device serial: # First serial device.
    braille-device usb:/dev/ttyUSB0 # First USB device matching braille driver.
    braille-device usb:FT232BM # Specific USB device by serial number.
    #braille-device bluetoothxxxxxx # Specific bluetooth device by address.



    mersi oricum ptru promptitudine
    350 kg de scule!

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top