Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 5 of 5

Thread: Dreambox 8000

  1. #1
    Member Mentor
    RDI - Board Default Avatar

    Join Date
    Apr 2007
    Location
    Ardeal
    Posts
    870
    Posts Thanks / Likes

    Default Dreambox 8000

    salut,
    am vrut sa inlocuiesc imaginea in receptor cu cablu serial RS232,cablu pe care l-am folosit la dm 7020 de multe ori.am folosit pe rand doua aplicatii dreamup v.1.3.3.4 si 3.5.nici macr nu vrea sa inceapa reinstalarea.mai trebuie folosit ceva pe langa aceasta aplicatie ?

    am incercat 2 usb noi pt a instala o imagine.refuza formatarea cu flashwizard.le-am formatat in calculator cu FAT,in flashwizard zice ca nu sunt formatate.pe al doilea l-am pus pt instalare neformatat,nici asa nu vrea.

    rog ajutor.multumesc.

  2. #2
    Member Mentor
    Join Date
    Aug 2006
    Location
    Earth
    Posts
    815
    Posts Thanks / Likes

    Default

    Flashing a new firmware (image) by Browser 8000HD PVR




    '' How to flash Dreambox 8000HD PVR by web browser

    What you need to flash
    You need the image file you want to flash. Image files have the extension *.nfi. You can't flash other
    images like *.img files. Don't try it - it won't work.
    You need either a DHCP server, a configured bootloader or a serial cable and a terminal program
    like HyperTerm.
    You need a browser, and a network cable. If you connect the Dreambox directly to the PC,
    you need a cross cable, if you connect trough a switch/hub/router you need a normal
    (non-cross) cable.
    To flash a new image, you can use the second stage loader. It must be present and not broken.
    The following steps assume you have a DHCP server. If you don't have one, you have to setup
    an IP address in the bootloader's serial setup.


    Power down the Dreambox, either using "shutdown" (to enter the deep-standby mode) or by
    using the power-switch. Standby is not enough!


    (1.) Press and hold the lower frontpanel button.
    - (2.) Switch on the dreambox, either by using the powerswitch or, in deep-standby mode,
    press the power button. Still, hold the lower button.
    - (3.) A text "*** STOP ***" should appear. If something like "/flash".. appears, you didn't
    hold the right button. Now you can release the button.
    The bootloader entered the "waiting" mode.
    - (4.) Above the "*** STOP ***" text, there should appear an IP-address
    (four decimal values with a dot in between). If there appears the string "dhcp" instead,
    the box still searches for a DHCP server. Wait a bit. If it doesn't change, something doesn't
    work with the DHCP server. Check wether network cable is plugged in etc. If it just doesn't
    work, set an IP using the serial terminal)


    Now, open a browser on your PC.
    (1.) enter in the address line "http://ip/" (where ip must be replaced with the value in the LCD).
    (2.) on the bottom of the page, there's a link called "firmware upgrade". Click it.


    On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi"
    extension.
    You can't flash other images (like .img)!
    - Click on "FLASH!" and wait. It might take some time to upload and flash the image.
    - Switch the box off again, and on again. The new image should be flashed and working. ''

  3. #3
    Senior Member Expert
    Join Date
    Sep 2006
    Posts
    1,175
    Posts Thanks / Likes

    Default

    E naspa daca nu se poate flashui decat prin browser. Cel mai sanatos e cu DreamUp. Mai incearca totusi cand ii dai drumul de la spate tinand concomitent apasat pe butonul Power din fata cu DreamUp bagand si cablul ethernet in el ca asa merge si la DM500HD eventual ii scrii si Ipul sau acolo daca tot nu vrea.
    Antena Parabolica 1,8m Al cu 1 Lnb Invacom Quad 0,3db/Montura Polara/Actuator 18"/Pozitioner Diseqc Moteck V-BoxII/Antena Offset 1,2m AL fixa cu 1 Lnb Inverto Quad 0,2db/1xDM920UHD 4K.

  4. #4
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,460
    Posts Thanks / Likes

    Default

    Quote Originally Posted by valyp67 View Post
    E naspa daca nu se poate flashui decat prin browser. Cel mai sanatos e cu DreamUp. Mai incearca totusi cu DreamUp bagand si cablul ethernet in el ca asa merge si la DM500HD eventual ii scrii si Ipul sau acolo daca tot nu vrea.
    se poate si cu dreamup prin aceiasi metoda fara sa deschizi browserul.
    bifezi network,setezi cele 2 ip de sus cu ip pc-ului,jos ip dreambox.
    dai conect la dreamup,recunoaste modelul la boot iar cand ajunge la final intra in http mode.daca ip nu corespunde cu cel afisat de pe display-ul DM deconectezi dreamup,pui jos ip dhcp afisat de catre dreambox,opresti dreambox de la alimentare si repeti operatia.
    aceasta metoda necesita si cablul nullmodem.
    Succesuriiii!
    350 kg de scule!

  5. #5
    Senior Member Expert
    Join Date
    Sep 2006
    Posts
    1,175
    Posts Thanks / Likes

    Default

    Da corect,exact prin acest mod ma refeream si eu ca ar trebui sa mearga sanatos si bine.
    Antena Parabolica 1,8m Al cu 1 Lnb Invacom Quad 0,3db/Montura Polara/Actuator 18"/Pozitioner Diseqc Moteck V-BoxII/Antena Offset 1,2m AL fixa cu 1 Lnb Inverto Quad 0,2db/1xDM920UHD 4K.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top