Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Arrow CCcam - arhiva cu toate versiunile

    M-am gandit ca ar fi util sa avem toate versiunile de CCcam intr-un singur loc asa ca va pun la dispozitie arhiva mea. Este disponibila de pe Dropbox (descarcare directa, fara alti pasi intermediari).

    Lipsesc cateva (neesentiale), dar daca le aveti voi, spuneti-mi si o sa le urc in acelasi loc, dupa care voi actualiza lista de mai jos.
    Enjoy!

    CCcam_1.0.0.zip
    549.43KB

    CCcam_1.0.4.zip
    217.89KB

    CCcam-1.1.0.zip
    578.88KB

    CCcam_1.2.0.zip
    713.96KB

    CCcam-1.2.1.zip
    717.65KB

    CCcam-1.3.0.zip
    643.61KB

    CCcam-1.3.1.zip
    0.92MB

    CCcam-1.4.0.zip
    1.15MB

    CCcam-1.6.0.zip
    1.25MB

    CCcam_1.6.1.zip
    1.27MB

    CCcam-1.7.0.zip
    1.37MB

    CCcam-1.7.1.zip
    1.38MB

    CCcam-2.0.0.zip
    1.44MB

    CCcam-2.0.1.zip
    1.5MB

    CCcam-2.0.2.zip
    1.52MB

    CCcam-2.0.3.zip
    1.52MB

    CCcam-2.0.4.zip
    1.49MB

    CCcam-2.0.5.zip
    1.56MB

    CCcam-2.0.6.zip
    2.17MB

    CCcam-2.0.7.zip
    2.18MB

    CCcam-2.0.8.zip
    2.15MB

    CCcam-2.0.9.zip
    1.82MB

    CCcam-2.0.10.zip
    1.83MB

    CCcam-2.0.11.zip
    1.84MB

    CCcam-2.1.0.zip
    1.84MB

    CCcam-2.1.1.zip
    1.84MB

    CCcam-2.1.2.zip
    2.09MB

    CCcam-2.1.3.zip
    2.27MB

    CCcam-2.1.4.zip
    2.30 MB

    Daca vreti sa va deschideti un cont DropBox, va rog folositi acest link, pe langa cei 2 GB spatiu de stocare pe care ii obtineti "default", se mai ofera inca 250 MB suplimentar, atat pentru voi cat si pentru mine. Spatiul il folosesc in spiritul "Open Source", numai pentru beneficiul utilizatorilor de Linux (CCcam si Dreambox face parte din comunitatea asta). Multumesc anticipat!


    Please consider to use this referral link if you intend to open an DropBox account. You will receive 2GB storage AND both of us will receive an extra 250 MB storage if you use this link. Thank you!

  2. #2
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Nu mi-e clar daca e nevoie de cont pe Dropbox pentru a putea descarca fisierele. Daca este asa, folositi linkul acesta.

  3. #3
    Moderator Expert
    Join Date
    Jul 2006
    Location
    blowfish me....
    Posts
    2,474
    Posts Thanks / Likes

    Default

    propun sa propui un sticky

  4. #4
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Quote Originally Posted by sinangel View Post
    propun sa propui un sticky
    Stai sa vedem daca este lumea interesata si apoi il facem si sticky. Deja lista de topicuri sticky este cam lunga ...

  5. #5
    Member Mentor
    Join Date
    Dec 2004
    Location
    zona sud
    Posts
    539
    Posts Thanks / Likes

    Default

    @SATWIEN
    chiar nimic ,era doar un link amarit ,nici nu am vazut ca era link direct acolo

  6. #6
    Moderator Expert
    Join Date
    Jul 2006
    Location
    blowfish me....
    Posts
    2,474
    Posts Thanks / Likes

    Default

    un model de config file ar fi binevenit cu setari de smargo cu tot...

  7. #7
    Silver Member Expert
    Join Date
    Jan 1970
    Location
    US of Europe
    Posts
    2,119
    Posts Thanks / Likes

    Default

    Da....asta chiar ca ar fi interesant , fiind raritate ,

  8. #8
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    @Sommersby
    @Sinangel

    Pentru ce card? Pentru ce server? Pentru ce versiune de CCcam? Sunt prea multe combinatii posibile, nu vad cum s-ar rezolva ...
    Iar daca va ganditi la N2 pe Smargo, sorry, eu nu i-am dat de cap ...
    Pe de alta parte, haideti sa tinem postul asta numai pentru versiunile de CCcam si sa discutam problemele de configurare separat.



    Pentru cei care indica alte linkuri de unde se pot descarca aceste fisiere:
    1. Descarcati de unde vreti, dar nu mai postati link-uri catre alte site-uri.
    2. Cu mici exceptii, pachetele puse mai sus sunt verificate, nu contin versiuni fake. Daca totusi vreti sa riscati, incercati pe alte site-uri.
    3. Cred ca este mai simplu sa stim ca avem totul la indemana pe forumul nostru, de ce sa stam de fiecare data cand avem nevoie de o anumita versiune sa pierdem timpul si sa gugalim?
    4. Multumesc pentru interes si atentie

  9. #9
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Am mai pus vreo 3-4 versiuni de CCcam, nu stiu daca mai lipseste vreuna. Am uitat sa va spun ca in arhive gasiti versiunile complete, pentru toate procesoarele.

  10. #10
    Gold Member Expert
    Join Date
    Feb 2005
    Posts
    4,738
    Posts Thanks / Likes

    Default

    Cred ca nu ar strica sa postati care carduri sunt citite direct in Dreambox, care merg doar cu cu NewCS/ Oscam..., dar pe scurt.
    CAID: 092F
    Prov_ID: 000000
    Cardurile merg citite direct in Dreambox cu versiunile CCcam_.../ CCcam_...;
    Cardurile nu merg citite direct cu versiunile CCcam_;
    Si din cind in cind, @satwien sau alt moderator, sa cumuleze informatiile intr-un singur post-la vedere. Ce ziceti

    Cred ca ar fi bine, a fi afisat un Realese History la fiecare versiune CCcam:

    CCcam release history

    2.1.2 20.07.2009
    -several smartcard fixes
    -via emm fixes
    -seca emm fixes
    -added SMARTCARD SID ASSIGN, see CCcam.cfg for details
    -TNT sat
    -double login loop fix
    -serverside emm overload fix

    2.1.1 05.04.2009
    -fixed MINIMUM CLIENT VERSION check, broken since 2.1.0
    -several smartcard fixes

    2.1.0 19.03.2009
    -keep persistant ecm counts for clients
    -i2 emu
    -IGNORE NODE option (see CCcam.cfg)
    -emm caid tunneling
    -Added seca handler to prefer or ignore SECA2 or SECA3 (see CCcam.cfg)

    2.0.11 16.12.2008
    -support caid tunnelling
    -improved chid selection

    2.0.10 09.11.2008
    -improved system selection (based on distance). Note that prios from prio file overrule this and might give worse results
    -fixed aborting lengthy request when switching channels
    -fixed low audio pid detection

    2.0.9 23.05.2008
    -improved system selection
    -fixed ...... chid selection
    -dm800 detection
    -fixed minor memleak

    2.0.8 28.02.2008
    -fixed n2 emu freezes with static (non-openssl) version
    -improved system selection (making prio file mostly obsolete)

    2.0.7 16.02.2008
    -fixed camcrypt on static (non-openssl) version
    -fixed segfault reading config

    2.0.6
    -ignore errors on emm demux (caused n2 AU to abort on certain hardware)
    -tps au fix
    -various optimizations; avoid server slowing down because of slow clients

    2.0.5 17.01.2008
    -global share limits (see CCcam.cfg for details)
    -global minimum required downhops setting (see CCcam.cfg for details)
    -n2 AU fix (/var/keys/ROM120.bin required)
    -cryptoworks sc fix
    -90f sc fix
    -viaccess sc emm fix
    -changed 'double client login reject' mechanism
    -G line local sharing fixed
    -graceful shutdown

    2.0.4 14.10.2007
    -support more than one emm listener (see CCcam.cfg for details)
    -tps au fixes
    -nds sc init fix

    2.0.3 03.08.2007
    -nagra fixes
    -G line remote sharing fixed
    -allow more limits in C/F/G

    2.0.2 30.07.2007
    -nagra fixes
    -...... camcrypt
    -tps au
    -cryptoworks keys no longer hardcoded

    2.0.1 09.07.2007
    -changed G: line syntax, see CCcam.cfg for details
    -multiple G: lines on the same local port supported
    -each G: line can have different localhost
    -each G: line can have different pass
    -sharing between G: lines supported
    -nagra2 MECM

    2.0.0 10.06.2007
    -removed gbox_indirect support
    -added gbox support
    -several smartcard fixes
    -several smartcard reader fixes
    -fixed LOADBALANCE parsing (broken in 1.7.1)

    1.7.1 16.04.2007
    -several smartcard fixes
    -conax ca pin support (use 'PIN:' in CCcam.cfg)
    -added SMARTCARD WRITE DELAY setting, to tweak performance on mastera/sc8in1 and such
    -moved providernames to an external file /var/etc/CCcam.providers. Format is 'hexvalue "providername" comments'
    -channelname can now be displayed in webif instead of caid:ident:sid when defined in /var/etc/CCcam.channelinfo
    -demuxapi support dropped
    -gbox indirect: reuse slots
    -avoid glitch when zapping over recorded channel (7025)
    -two cam devices on DM600

    1.7.0 20.03.2007
    -fixed password bug (consider using "MINIMUM CLIENT VERSION: 1.7.0" to avoid risk)
    -added viaccess smartcard emm
    -added support for gbox indirect/local connection
    -added optional ip address/hostname to F: line, no ip given allows the connection from all ip's (See CCcam.cfg for example)
    -tps au (tune to Hotbird transponder 10873 vertical)
    -added smartcard custom post-init (see CCcam.cfg) Currently only T=0 supported
    -support to override detected dvb api version
    -support sc8in1 (note: PHOENIX READER PATH --> SERIAL READER in CCcam.cfg)

    1.6.2 19.02.2007
    -fixed crash when reading malformed SoftCam.Key
    -fixed possible crash betacrypt smartcard emm
    -minor ...... improvements
    -added config option to avoid (hidden) chids being ignored on ...... smartcard (See CCcam.cfg)
    -added timeslots per friend connection, now possible to only open connection for a few hours (See CCcam.cfg for example)
    -Nagra emu fixes

    1.6.1 29.01.2007
    -fixed ...... camdata setting (setting was not used correctly in 1.6.0)
    -CCcam.prio: nagra caid:ident entries with nonzero ident now always match
    (nagra ident is unknown at time of prio check, see CCcam.cfg for details)
    -few small workarounds for buggy 7025 scidriver
    -show share (nodeid_handlerid) in ecm.info
    -tps.bin support (fixed location /var/keys/tps.bin), using systemtime

    1.6.0 22.01.2007
    -fixed wrong ...... camdata default (since 1.4.0)
    -implemented ...... camdata setting
    -improved self learning for ......
    -fixed constant cw
    -added biss support
    -added priolist support
    -max C / F username length now 20 instead of 19
    -max C / F password length now unlimited instead of 16
    -switches to enable/disable web and telnet info info interfaces
    -implemented authentication for web and telnet info interfaces
    -Note: the web and telnet info port paramater have changed name in the config file
    -Note2: /var/keys/CCcam.ignore does not exist anymore and /var/etc/CCcam.prio is the new one
    see CCcam.cfg for details

    1.5.0
    -improved dvb api detection (for systems with both demuxapi and dvb devicenodes)
    -avoid exit on systems that provide nonworking dvb devicenodes
    -avoid blocking on nonworking newcamd connection (since 1.4.0)
    -added column in client info output to see the ecm time per client, only available if SHOW TIMING is on
    -reworked share and provider info into tabular form

    1.4.0 05.02.2007
    -implemented ...... camkey setting
    -runtime dvb api version detection
    -implemented share limits on client side (just like server side), see CCcam.cfg for details
    -implemented load balancing between identical cards, see CCcam.cfg for details
    -finetuned tcp behaviour and settings, saving some network load
    -fixed newcamd connection emm
    -seca smartcard entitlements fix
    -...... smartcard emm fix
    -removed -k cmdline parm, use config file instead
    -cmdline parms could previously be overruled by rereading cfg file, fixed

    1.3.1 22.10.2006
    -7025: several bugfixes
    -7025: decoding of all 8 channels (1.3.0 only 4)
    -fixed viaccess smartcard
    -fixed stealth mode, also set per N line now (see CCcam.cfg)

    1.3.0
    -fixed some 64 bits issues
    -fixed radegast provider id and nano field
    -reduced binary size
    -immediately interrupt lengthy emu calculations when zap takes place
    -userinfo was not correctly reread, therefore you needed to restart CCcam when certain parts of the userinfo changed, fixed
    -it is now possible to block a channel for a client, based on caid:id:sid see F entry config for an example
    -changed emu share limits behaviour, <1.3.0 an emu matched a F entry limit with {caid:ident:n}, for any nonzero ident. >=1.3.0, an emu only matches {caid:0:n}
    -added '-l' cmdline option, to disable all 'self-learning' stuff. This option might avoid problems with ...... smartcards
    -ports 15000-15004 and port 14000 are now gone. Use 16000 and 16001 (html) instead
    -implemented workerthread pool to handle client requests, to improve handling larger numbers of clients
    -added support for cryptoworks camcrypted cards (incl arena tv). IPK handing is internal, no need for external keys and such
    -added support for BEEF patched cards using nagra over seca tunnelling, add id's in config file(see example)
    -added conax smartcard support (ecm+emm)
    -added entitlements for cryptoworks and conax smartcards
    -allow emm one extra level

    1.2.1
    -fixed smartcard support for some seca providers
    -fixed smartcard activation for some seca providers

    1.2.0
    -fixed betacrypt entitlements
    -fixed betacrypt emm
    -fixed nds entitlements
    -fixed nds freeze with certain ecm on phoenix
    -...... emu emm added
    -seca emu added
    -initialise all cards before starting to decode, ensures immediate success on startup
    -restart emm when a card is inserted, for easier activation of new cards
    -faster client ecm handling (new client logon no longer delays requests of existing clients)
    -command-based info interface on port 16000
    -web info interface on port 16001
    (As of now getting info from ports 15000-15004 is deprecated. This interface will be removed in the next release.)
    -newcamd stealth mode added
    -removed <1.1.1 backward compatibility code from share protocol, to allow full use of optimisations introduced in 1.1.1
    -when CCcam was connecting to a share it kept on connecting on same ip, not very good when a dyndns address was in the config
    -ecm request cache didn't work in all situations, caching fixed and improved.
    -emm didn't always work on demuxapi systems (e.g. relook, mutant). Fixed.
    -WARNING: F: entry syntax changed, check and update your CCcam.cfg; added parameters to allow emusharing and emm, per client

    1.1.1
    -when a share doesn't work for a certain channel, skip aliases of that share for that channel
    (aliases are the same cards shared through different routes, they have equal nodeID_shareID at the end of their line in the output on port 15002)
    -ignore '0' providerids on seca cards
    -nagra2 emu fix for some providers
    -fixed occasional nds emm freeze
    -allow multiple L: entries to connect to different cards on the same camd3 server/port
    -fixed phoenix on certain comport chipsets
    -optimized share protocol (backward compatibility with <1.1.1 guaranteed, warning, will be removed in next release)

    1.1.0
    -camd3 support, one card per L: line
    -support to add downshare limits to F: entries

    1.0.0
    -first public release
    -various smartcards
    -various emus
    -share2share support (C: and F: entry)
    -newcamd support (N: entry)
    -radegast support (R: entry)
    -all shares are available for clients on a single port (default 12000)
    -emu's can be shared one hop down only
    -cards can be shared multiple hops down
    -each CCcam node has a unique nodeid
    -routes to a card are given with nodelists
    -when a card is reachable through multiple routes, each unique route will be available as individual share
    -shares with nodeid 'abc' in the routelist are never sent to client with nodeid 'abc', to avoid route loops
    -watch your shares, including full routelist, on port 15002
    -start with -h to view available commandline options
    -syslog support, start with -v for more verbosity
    -start with -d to run in foreground, and log to console instead of syslog
    -inserted cards (in either available reader) start working right away
    -all used config and key files are re-read on change, never need to restart CCcam

  11. #11
    Member Mentor
    Join Date
    Dec 2003
    Location
    in canal,langa aurolaci
    Posts
    664
    Posts Thanks / Likes

    Default

    Carduri citite direct de catre CCCAM :

    - AKTA (ex Max-Tv) (Romania, on 4,8°, Viaccess [which version]) card works in CCcam on DM500 but doesn't make AU.
    - ABS-CBN (Irdeto2, CAID 0604 ACS605)
    - AlJazeera Sport (......, CAID 603, ACS 606)
    - AyngaranTV (viaccess)
    - ART international (North Africa, viaccess 2.6, 500:21110)
    - ART 7W (......, CAID 604, ACS 505)
    - ArenaSat Cryptoworks (Problems with Youghtprotection Code)
    - Bulsatcom (Irdeto2 Caid 604 ACS 605)
    - BSkyB (UK, NDS2 - blue card, read directly on DM 500, 7000, 7020 and 7025 and now also DM800 and 600)
    - BHTV (16E, viaccess)
    - Bis TV ( viaccess France )
    - Canal Digitaal (Netherlands, Seca 3 v10)
    - Canalsat + TPS (France, viaccess 3.0, CAID 003
    - Canal+ (France, Viaccess 3.0)
    - Canal+ Maghreb ( Maghreb, viaccess 500:41140)
    - Cyfra+ (Poland, Seca4 v10)
    - DeepamTV (viaccess)
    - Digital+ tunneled Seca4 v10)
    - Digiturk (Cryptworks? )
    - DigiTurk 7E (Cryptoworks, REV5, CAID d00)
    - Digiturk (Irdeto2 Caid 604 ACS 605 work ok - new v5.7 card acs608 is NOT working on ANY cardsharing)
    - Digitalb (Albania, Conax CAS5 and CAS7, HD channels use CAS7 only and do NOT work with any CS sw)
    - Dolce TV (Romania, ***)
    - Dorcel / FreexTV / Xdream (Viaccess)
    - Focussat (Romania, Conax) at 0,8W, make AU
    - Hayat TV (13E, viaccess)
    - HRT (Viaccess 3.0)
    - HTB (Russia, works ok with both CCcam version 10 and 11)
    - ITV Partner (Cryptoworks card bios rev 3)
    - JSC Sport (North Africa, viaccess 3.0, 500:30700)
    - KabelDeutschland (Germany, Nagra3, Rom?)
    - Kabelkiosk (Conax)
    - Martens (Conax)
    - Meo (Portugal, Seca3 V10)
    - MCT (Viaccess version?)
    - MCT (...... version?)
    - MTV Unlimited (Conax version?)
    - Nova (...... version?)
    - Orbit 26E (......, CAID 668, ACS 606)
    - ORF (Cryptoworks, REV3)
    - Sky germany (Nagra3, Rom 181)
    - Sky Germany (*** V13)
    - Private Spice (Viaccess version?)
    - Private Spice (...... version?)
    - Raduga TV (Russia 75E, Irdeto2 v5.7 ACS60
    - RTvi (Russia 13E, viaccess [which version])
    - Svt Europa 9E (Viaccess)
    - SRG (Viaccess 2.6)
    - Sex On Tv (Viaccess version?)
    - Sex On Tv (...... version?)
    - SexView (Viaccess version?)
    - SexView (...... version?)
    - SexView (Conax version?)
    - SkyLink 23,5E (Cryptoworks Rev6, CAID D03)
    - Sky Italia (Italy, *** 2, CAID 0919)
    - Sky Italy (Italy, NDS3, CAID 093B works directly on cccam as of version 2.1.0)
    - Showtime 7W (......, CAID 604, ACS 605 - new card v5.7 NOT working in sharing)
    - Telesat (Belgium - Seca 2 - CAID 100:6d)
    - TotalTV ( Serbia, *** )
    - TV Vlaanderen (Belgium, Seca 3 v10)
    - Viasat 5E (Scandinavia, NDS2, CAID 90F - new card NDS3 does not work in sharing yet. HD channels also don't work in sharing.)

    Carduri care functioneaza pe CCCAM doar daca Newcs le citeste :

    - BskyB (UK, NDS3 - new white card - CAID 0963 - works only with newcs version 1.66)
    - D+ (Spain, N3, Rom 180)
    - DigiTV (Romania, N3, Rom 142)
    - NTV+ (Russia, Viaccess 2.6?)
    - Polsat (Poland, N3, Rom 142?)
    - RUV (Iceland 0b01)
    - Tring (Albania,Conax)
    - Tntsat(France, viaccess3, 30b00 (19))
    - Zon Tv Cabo (Portugal, N3, Rom 142)

    Carduri care NU merg in Sharing :

    - Cabovisao Portugal HD & SD - Conax CAS7
    - Digitalb Albania HD - Conax CAS7
    - Digiturk Turkey - ...... v5.7
    - Showtime - ...... v5.7
    - Viasat Scandinavia HD - ***
    - Boom TV Romania - ***
    - Vision TV Ukraine - ***
    - TVR package (TVR1, TVR2, TVR-HD)

    Living an analog lifestyle in a digital world

  12. #12
    Moderator Expert
    Join Date
    Sep 2003
    Location
    BRASOV
    Posts
    3,462
    Posts Thanks / Likes

    Default

    Quote Originally Posted by marcelll View Post
    Carduri citite direct de catre CCCAM :

    Carduri care NU merg in Sharing :

    - Cabovisao Portugal HD & SD - Conax CAS7
    - Digitalb Albania HD - Conax CAS7
    - Digiturk Turkey - ...... v5.7
    - Showtime - ...... v5.7
    - Viasat Scandinavia HD - ***
    - Boom TV Romania - ***
    - Vision TV Ukraine - ***
    poti sa bagi si tvr1,2,hd in lista!
    350 kg de scule!

  13. #13
    Târnacopist Expert
    Join Date
    Dec 2005
    Location
    /home/satwien/
    Posts
    6,001
    Posts Thanks / Likes

    Default

    Merci Gogi, am editat eu postul de mai sus si am pus si TVR-ul.

  14. #14
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Dec 2009
    Location
    UK
    Posts
    3
    Posts Thanks / Likes

    Default

    Nice to see my original thread from EuroCardSharing translated into other languages. I and the other ECS colleagues spent a lot of time building this list of CCCAM WORKING CARDS. ECS is currently down, but it will be back soon - if you have any suggestions to this list, we ask everyone who uses it to send it to me via PM there. If you can contribute, it will be a nice way to say thanks!

    Quote Originally Posted by marcelll View Post
    Carduri citite direct de catre CCCAM :

    - AKTA (ex Max-Tv) (Romania, on 4,8°, Viaccess [which version]) card works in CCcam on DM500 but doesn't make AU.
    - ABS-CBN (Irdeto2, CAID 0604 ACS605)
    - AlJazeera Sport (......, CAID 603, ACS 606)
    - AyngaranTV (viaccess)
    - ART international (North Africa, viaccess 2.6, 500:21110)
    - ART 7W (......, CAID 604, ACS 505)
    - ArenaSat Cryptoworks (Problems with Youghtprotection Code)
    - Bulsatcom (Irdeto2 Caid 604 ACS 605)
    - BSkyB (UK, NDS2 - blue card, read directly on DM 500, 7000, 7020 and 7025 and now also DM800 and 600)
    - BHTV (16E, viaccess)
    - Bis TV ( viaccess France )
    - Canal Digitaal (Netherlands, Seca 3 v10)
    - Canalsat + TPS (France, viaccess 3.0, CAID 003
    - Canal+ (France, Viaccess 3.0)
    - Canal+ Maghreb ( Maghreb, viaccess 500:41140)
    - Cyfra+ (Poland, Seca4 v10)
    - DeepamTV (viaccess)
    - Digital+ tunneled Seca4 v10)
    - Digiturk (Cryptworks? )
    - DigiTurk 7E (Cryptoworks, REV5, CAID d00)
    - Digiturk (Irdeto2 Caid 604 ACS 605 work ok - new v5.7 card acs608 is NOT working on ANY cardsharing)
    - Digitalb (Albania, Conax CAS5 and CAS7, HD channels use CAS7 only and do NOT work with any CS sw)
    - Dolce TV (Romania, ***)
    - Dorcel / FreexTV / Xdream (Viaccess)
    - Focussat (Romania, Conax) at 0,8W, make AU
    - Hayat TV (13E, viaccess)
    - HRT (Viaccess 3.0)
    - HTB (Russia, works ok with both CCcam version 10 and 11)
    - ITV Partner (Cryptoworks card bios rev 3)
    - JSC Sport (North Africa, viaccess 3.0, 500:30700)
    - KabelDeutschland (Germany, Nagra3, Rom?)
    - Kabelkiosk (Conax)
    - Martens (Conax)
    - Meo (Portugal, Seca3 V10)
    - MCT (Viaccess version?)
    - MCT (...... version?)
    - MTV Unlimited (Conax version?)
    - Nova (...... version?)
    - Orbit 26E (......, CAID 668, ACS 606)
    - ORF (Cryptoworks, REV3)
    - Sky germany (Nagra3, Rom 181)
    - Sky Germany (*** V13)
    - Private Spice (Viaccess version?)
    - Private Spice (...... version?)
    - Raduga TV (Russia 75E, Irdeto2 v5.7 ACS60
    - RTvi (Russia 13E, viaccess [which version])
    - Svt Europa 9E (Viaccess)
    - SRG (Viaccess 2.6)
    - Sex On Tv (Viaccess version?)
    - Sex On Tv (...... version?)
    - SexView (Viaccess version?)
    - SexView (...... version?)
    - SexView (Conax version?)
    - SkyLink 23,5E (Cryptoworks Rev6, CAID D03)
    - Sky Italia (Italy, *** 2, CAID 0919)
    - Sky Italy (Italy, NDS3, CAID 093B works directly on cccam as of version 2.1.0)
    - Showtime 7W (......, CAID 604, ACS 605 - new card v5.7 NOT working in sharing)
    - Telesat (Belgium - Seca 2 - CAID 100:6d)
    - TotalTV ( Serbia, *** )
    - TV Vlaanderen (Belgium, Seca 3 v10)
    - Viasat 5E (Scandinavia, NDS2, CAID 90F - new card NDS3 does not work in sharing yet. HD channels also don't work in sharing.)

    Carduri care functioneaza pe CCCAM doar daca Newcs le citeste :

    - BskyB (UK, NDS3 - new white card - CAID 0963 - works only with newcs version 1.66)
    - D+ (Spain, N3, Rom 180)
    - DigiTV (Romania, N3, Rom 142)
    - NTV+ (Russia, Viaccess 2.6?)
    - Polsat (Poland, N3, Rom 142?)
    - RUV (Iceland 0b01)
    - Tring (Albania,Conax)
    - Tntsat(France, viaccess3, 30b00 (19))
    - Zon Tv Cabo (Portugal, N3, Rom 142)

    Carduri care NU merg in Sharing :

    - Cabovisao Portugal HD & SD - Conax CAS7
    - Digitalb Albania HD - Conax CAS7
    - Digiturk Turkey - ...... v5.7
    - Showtime - ...... v5.7
    - Viasat Scandinavia HD - ***
    - Boom TV Romania - ***
    - Vision TV Ukraine - ***
    - TVR package (TVR1, TVR2, TVR-HD)
    Cheers!

    Nina

  15. #15
    Gold Member Expert
    Join Date
    Jan 1970
    Posts
    3,358
    Posts Thanks / Likes

    Default

    Ce versiune cccam merge cel mai bine pe Ubuntu ?

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top