Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 8 of 8
  1. #1
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Oct 2005
    Posts
    27
    Posts Thanks / Likes

    Default besat 2400 super gold & Dream TV AU


    @Kevo

    You posted that you used an old MTG first then installed DS then the sept 5 Dream AU s/w. Can you pls give the exact file name of the old MTG you used. I'd like to try it in my receiver too. Thanks.

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    TFC Office - Europe (#13)
    Posts
    162
    Posts Thanks / Likes

    Default

    @kevo

    Where are you? someone need your help. Time to share your expertise. Goodluck

  3. #3
    SATELLITE GURU Expert
    Join Date
    Mar 2004
    Location
    Bletchley Park Code Breaking Lab
    Posts
    2,521
    Posts Thanks / Likes

    Default Re: besat 2400 super gold & Dream TV AU

    Quote Originally Posted by randy
    @Kevo

    You posted that you used an old MTG first then installed DS then the sept 5 Dream AU s/w. Can you pls give the exact file name of the old MTG you used. I'd like to try it in my receiver too. Thanks.
    You can get all the files at UCASCITY Metabox section all software files.

    Use the Autoemetabox1 first then the 20050905 patch on top of that.
    If Evolution works, why so many idiots?


  4. #4
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2005
    Location
    Sa bubong
    Posts
    135
    Posts Thanks / Likes

    Default

    Randy - sent u a pm with details.

    For anybody else who is interested,as was already pointed out, go to- http://www.ucascity.com/forums/showt...9&page=1&pp=10

    All the files you need are here.

    I loaded MTG10-18-xMAIN05[1].62-01-TVcanbo-05-04-06 first, but 1.4.3.4 LE indonesia will do the same job.

    After that, load the latest meta_20050905_DreamAu.

    Reset your keys by pressing the reset button whilst you are in the Nagra section ( I think blue button on remote)

    Switch reciever off, wait a few seconds, switch back on, enter the latest Dr**m key, and your all done.

    Thanks to Boknoy, Guru, and all the metaboys for their help in getting me up and running.

  5. #5
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Oct 2005
    Posts
    27
    Posts Thanks / Likes

    Default Re: besat 2400 super gold & Dream TV AU

    Quote Originally Posted by irdeto2engineer
    Quote Originally Posted by randy
    @Kevo

    You posted that you used an old MTG first then installed DS then the sept 5 Dream AU s/w. Can you pls give the exact file name of the old MTG you used. I'd like to try it in my receiver too. Thanks.
    You can get all the files at UCASCITY Metabox section all software files.

    Use the Autoemetabox1 first then the 20050905 patch on top of that.
    Thank you for the assistance, but sorry I did not inform you that i jtagged the unit already as it got corrupted and ok working fine on european channels after that. Here is my concern: Andrew 007 from another forum posted that his unit same model and brand has a HW version of MSR-5690 but mine after jtagging is HW version MRS-52xx i cant recall the last 2 digits. The file I used for complete reflash was contributed by Nazmy. I requested for newer version from other fora but no one replied until now. Im sure your method is 100% sure but it may not work if I dont use the original flash dump file. Can you or anybody send me a full dump flash file for Besat 2400 super gold. Thanks a lot. More power to you all!

  6. #6
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Location
    TFC Office - Europe (#13)
    Posts
    162
    Posts Thanks / Likes

    Default

    @randy

    JTAG is only the last option if you don't have a chance to revived your receiver from a wrong patch/update. But if your STB is clone, then this how's your STB common problem, JTAG most of the time.

    Check your PM for the procedures (wihtout JTAG) and hope your STB back to normal. Goodluck.

  7. #7
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Sep 2005
    Location
    Sa bubong
    Posts
    135
    Posts Thanks / Likes

    Default

    Yep, my HW is 5690 also. I dont have the knowledge of how to make a complete backup of my reciever, and would be grateful if anybody could help me here. It may help Randy also to have a copy of mine.

    As a side note, I noticed that using STB wizard, the unit is detected as MSR - 5690, but the vendor does not show as Metaware, but displays "unknown".
    Is this normal for Besats, or is mine a clone of a clone ?

  8. #8
    Platinum member Expert
    Join Date
    Jun 2004
    Location
    29°20'N 47°59'E
    Posts
    5,711
    Posts Thanks / Likes

    Default


    Quote Originally Posted by kevo
    Yep, my HW is 5690 also. I dont have the knowledge of how to make a complete backup of my reciever, and would be grateful if anybody could help me here. It may help Randy also to have a copy of mine.
    only JTAG will let you do a backup of your firmware, and then you can send that same copy to Randy.

    As a side note, I noticed that using STB wizard, the unit is detected as MSR - 5690, but the vendor does not show as Metaware, but displays "unknown".
    Is this normal for Besats, or is mine a clone of a clone ?
    i think this is normal, and no, Besat is not a clone as it is one of the authorised reseller for metaware products.
    HP-Compaq DC5000 MT 1.5GB RAM
    Debian Squeeze with Smargos
    CCcam 2.1.4

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. besat 2400 super gold
    By anjum73 in forum RDI - English
    Replies: 2
    Last Post: 3rd September 2006, 13:34
  2. BeSat 2400 SUPER GOLD (USB port), please help
    By kazalmahmood in forum RDI - English
    Replies: 7
    Last Post: 14th August 2006, 01:28
  3. besat 2400 super gold needs upgrade
    By wbvilla in forum RDI - English
    Replies: 1
    Last Post: 21st July 2006, 21:10
  4. Besat 2400 super gold problem
    By wbvilla in forum RDI - English
    Replies: 17
    Last Post: 28th November 2005, 05:37
  5. Besat 2400 Super Gold and Dr**m TV
    By kevo in forum RDI - English
    Replies: 2
    Last Post: 2nd October 2005, 17:02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top