Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: nano 2...RSC

  1. #1
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    147
    Posts Thanks / Likes

    Thumbs up nano 2...RSC


    Am cumparat aceasta cutie, Conaxsat CNX nano 2, cu
    ajutorul careia pot vedea RSC-urile prin IKS.

    Sanatate la toata lumea.

  2. #2
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Dec 2007
    Posts
    118
    Posts Thanks / Likes

    Default ?

    de unde ai luato frate..ca eu am cumparat unu si nu imi mergea dongle ..nu se aprindeau led alea mici de la dongle....rosu si verde...si nu primeam semnal de la net...in boxa..

    si lam returnat..
    de unde lai luat..

    mersi

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    147
    Posts Thanks / Likes

    Post

    Quote Originally Posted by stel_i79 View Post
    de unde ai luato frate..ca eu am cumparat unu si nu imi mergea dongle ..nu se aprindeau led alea mici de la dongle....rosu si verde...si nu primeam semnal de la net...in boxa..

    si lam returnat..
    de unde lai luat..

    mersi
    Hi Stel
    Vorbim de nano 2, ledurile nu trebuie sa stea aprinse si lipsa de net este
    din setarea cutiei info.mai multe la dssrookie. Cit despre locatie,
    cea mai ieftina de pe fleabay.

    Sanatate la toata lumea.

  4. #4
    Junior Member Teacher
    Join Date
    Dec 2007
    Posts
    209
    Posts Thanks / Likes

    Default

    Quote Originally Posted by barbu11 View Post
    Am cumparat aceasta cutie, Conaxsat CNX nano 2, cu
    ajutorul careia pot vedea RSC-urile prin IKS.

    Sanatate la toata lumea.

    Merg PPV pe Dish sau Bev?

  5. #5
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    147
    Posts Thanks / Likes

    Post

    Quote Originally Posted by danbxx View Post
    Merg PPV pe Dish sau Bev?
    Am montat cutia ieri pe fuga, dar din cite am citit se pot
    vedea citeva PPV doar Duminica.

    Toate bune

  6. #6
    Junior Member Teacher
    Join Date
    Dec 2007
    Posts
    209
    Posts Thanks / Likes

    Default

    Quote Originally Posted by barbu11 View Post
    Am montat cutia ieri pe fuga, dar din cite am citit se pot
    vedea citeva PPV doar Duminica.

    Toate bune

    Multumesc.
    Am gasit lista completa pe BEV si D$sh

    http://cnxdongle.org/channels/

  7. #7
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    47
    Posts Thanks / Likes

    Default

    Salut,

    am o intrebare va rog.
    Cutia vine cu iHub sau trebuie cumparat separat ? Sau nu trebuie si te poti conecta direct la net, asa cum vine ?

    Multumesc anticipat,

    coco

  8. #8
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    147
    Posts Thanks / Likes

    Post

    Quote Originally Posted by coco100 View Post
    Salut,

    am o intrebare va rog.
    Cutia vine cu iHub sau trebuie cumparat separat ? Sau nu trebuie si te poti conecta direct la net, asa cum vine ?

    Multumesc anticipat,

    coco
    Cutia vine cu Ethernet Adapter ca sa te legi la net, fara adptor
    nu te ptozi lega la net.
    La N.Y. l-am ridicat de la un dealer chinez cu 165 cash,
    fara stick USB si cablu pt. net.

    Toate bune

  9. #9
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    47
    Posts Thanks / Likes

    Default

    Multumesc.

  10. #10
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    47
    Posts Thanks / Likes

    Default nano 2...RSC - mai poate confirma cineva daca merge pe GC

    Salut,

    mai poate confirma cineva ca merge pe GC - RSC, zone TO? Am citit pe alte forums, si uni aveau probleme sa se conecteze la ip ( sau nu faceau ce trebuie poate ).

    Multumesc.

  11. #11
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jan 2008
    Posts
    5
    Posts Thanks / Likes

    Default

    Am si eu o problema, am primit cutia ieri, am setat ip dar registration imi da eroare, este serverul cazut sau nu stiu eu cum sa procedez.

    thx

  12. #12
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    147
    Posts Thanks / Likes

    Post

    La mine a mers din prima cu IP-ul, poate ca a fost la inceput de saptamina? si conectia de la linksys (DD-WRT) este Wi-Fi.
    Am urmat inst. de la dsstester:

    File via USB
    Download and the latest file for the CNX Nano2. Save this file on your computer. Next you need to go and decompress (extract) the file. Once this is done, you should have a file in the .NPN format. Send the .NPN file to a USB stick.

    Insert the USB stick into the USB port on the front of the Nano2.

    On the remote, press MENU. Use the RIGHT ARROW to scroll to the gaming controller icon. Now use the DOWN ARROW to select USB from the list of files.
    Scroll down until you have the file you want to load to the receiver highlighted in yellow.
    Press the OK button. It will ask you which format you wish to load the file to the receiver as. I generally do mine as Bootloader, which is recommended. However, this will reset the receiver to factory state. Be sure to save your settings and possibly channel list before doing this.
    Wait for the receiver to read the file and flash the file to the memory. The receiver will reboot after three seconds..wait for it.

    Setting up the Dish D Settings

    Press menu on the remote. Use the RIGHT ARROW to scroll to the Installations section. Select DiSeqC switch from the list. You should see listings for Diseqc 1 through 4.
    On diseqc 1, press the OK button to open a list of satellites. Select the satellite you wish to assign to this port.
    Under the Satellite name, you should see a group of numbers. This is the recommended LNB frequency for this satellite. Move down to this number with the DOWN ARROW and press OK. This is where you select the LNB TYPE that you have. (just a hint...select DishPro1 for DPP lnbs). After selecting the LNB type for all of your sats, press exit.

    NOTE:: You can also go directly to the "SEARCH" button at the bottom of the Diseqc screen and it will search for the LNB type and satellites you are aimed at.

    Scanning for Channels
    Scanning for Channels
    You should still be in the installation menu after exiting the Diseqc settings screen. If so, select Channel Search fro the list. The top option will be satellite....it should be the satellite that you assigned to Diseqc port 1 earlier. scroll down to the SEARCH button and select it. Wait for the receiver to finish scanning in the channels for this sat.
    Once it is done with that sat and the info is saved, then go back to the top of the Channel search screen and select the next satellite you wish to scan for channels. Repeat these steps until you have scanned in channels for each satellite you assigned in the Diseqc Switch screen.

    Setting up Networktwork

    From the main screen, Press Menu and use the RIGHT ARROW to scroll over to the Accessory Section. Select Key Works from the list. You should go to A CAS screen.
    Here you need to set all of the Autorolls to OFF. Also set the EMU for OFF.
    Exit back out.

    Next, scroll back to the Installations menu. Select Network form the list. You are now in the Network Screen.
    Highlight and select IP Setup.
    From the first spot, I suggest you set the network setting to AUTO. Scroll down and select Apply. Give it a few seconds. You Network settings should automatically fill in.

    Press EXIT.

    Scroll down to IKS REGISTRATION. Press OK. Give it a few seconds. Hopefully you will get and OK message followed by a series of numbers. If you do, you should be connected to the servers. If you get an error, try a gain in a few seconds. Keep trying until you get an OK message.
    Due to a security feature that has been added, after you get the OK message, it still may take a while to get a picture. If you followed these setup instructions you should be correctly set up. Let the receiver sit on an IKS supported channel, it will eventually come up.

    You should now be able to exit all the way back out and watch IKS supported channels.

    Setting Optionsother OPTIONS

    from the main screen, Press MENU and scroll over to the Options ICON. Here you can set the time and other options.

    GC- inca este deschis, nu conteaza Sud sau Nord,

    Toate bune si sper sa ajute

  13. #13
    Junior Member Junior
    RDI - Board Default Avatar

    Join Date
    Jan 2008
    Posts
    5
    Posts Thanks / Likes

    Default

    In sfirsit, dupa zeci de incercari registration was OK.
    Nu am facut altceva decit am insistat pe registration pina a luat-o.

    Dupa 1/2 ora a cazut si nu am mai putut obtine ip auto (resetat modem, reciver, etc),asa ca am mers pe ip manual si acum merge bine.

    Pina cind?, vom vedea.

    Sanatate si Sarbatori Fericite !

  14. #14
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    47
    Posts Thanks / Likes

    Default

    Va multumesc,

    pentru toate info mentionate.
    Astazi l-am instalat si pot spune ca merge.

    Sarbatori Fericite !

  15. #15
    Junior Member Friend
    RDI - Board Default Avatar

    Join Date
    Aug 2007
    Posts
    47
    Posts Thanks / Likes

    Default


    Salut,

    merg RSC-urile astazi ?

    merci

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top