Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Donate Now Goal amount for this month: 100 EUR, Received: 16 EUR (16%)
Donate to support this site...

Results 1 to 4 of 4
  1. #1
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Posts Thanks / Likes

    Default Reprogramme the Matrix Cam reloaded

    Hi Room.
    Can anyone out there know's how to reprogramme this cam?Where to get the latest software to upgrade this cam?Your help will be mostly appreciated.


  2. #2
    Gold Member Expert
    Join Date
    Mar 2004
    Posts Thanks / Likes

    Default Re: Reprogramme the Matrix Cam reloaded

    Quote Originally Posted by henritz
    Hi Room.
    Can anyone out there know's how to reprogramme this cam?Where to get the latest software to upgrade this cam?Your help will be mostly appreciated.Thanks Henritz
    In which way do you want to program?
    By Laptop or CAS interface?
    Fte Max 100S
    Humax IRCI-5400z
    Asiasat 3S,NSS 6,Insat 4B,Thaicom2/5,Intelsat7/10,HB 6/7A/8

  3. #3
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Jul 2004
    Posts Thanks / Likes

    Default laptop



  4. #4
    Platinum member Expert
    Join Date
    Jun 2004
    29°20'N 47°59'E
    Posts Thanks / Likes

    Default Re: laptop

    Quote Originally Posted by henritz
    first off, not all laptops can update an MR but you may try following these steps:
    How to update a Matrix-Reloaded CAM using a notebook - another try

    For those who have problems upgrading an UCAS or MR CI-CAM to MR using
    a notebook or lappie with PCMCIA slot here's something you can try.
    There's no guarantee it will work for everyone though, sorry. Steps:

    1. First Windows own PCMCIA-drivers must be installed.
    2. For all Windows users *except* Windows 2000 users(!):
    go to control-panel -> properties of PCMCIA-controller -> driver ->
    more info. This will list all drivers of the PCMCIA-controller.

    Windows XP users: chose update driver and when asked where to look
    point to the subdirectoy of this package called -> xp_pcmcia and
    install it.

    Windows 98 and 98SE users(Millenium = 98SE, all the same): if your
    chain of drivers(under -> more info) contains a file called cbss.vxd
    then you can close all windows now. Go to "your" subdirectory of this
    package (either -> 98_pcmcia or -> 98SE_pcmcia) and copy the file
    cbss.vxd from that directory to your windows\system directory
    replacing the original cbss.vxd file. You might rename the old file
    first if you feel unsure.

    Now reboot your machine(XP users shouldn't have to reboot but you
    never know so do it anyway as it's just a matter of seconds).

    Win98(SE/ME) users with no cbss.vxd listed don't have to copy anything
    or to reboot. You should have pccard.vxd listed though, otherwise
    something with your PCMCIA-controller installation is wrong. Try to
    force PCIC-controller- or even general PCMCIA-controller- drivers and
    after installing them do a reboot and go back to 2.

    3. Win98(SE/ME) users: copy the file dvbcam.sys to your system32\drivers
    directory *by hand* and reboot your machine again.
    4. All Windows-users now, even those with Windows 2000: insert your UCAS
    or MR CAM into your PCMCIA-slot. When asked for a driver point to the
    dreammagic.inf file in this package. This should install the dvbcam.sys
    file for Windows 2000 and XP users, Win98(SE/ME) users already did copy
    this into the directory where it belongs(3.). You should hear a beep
    now and get a symbol in the system tray. Do not pull the CAM before
    another check: go to control panel -> properties of Smartcard(!) ->
    driver -> more info. The dvbcam.sys driver should now be listed there
    even for those who are running Win98(SE/ME) and there should be no
    exlamation marks anywhere in the control panel, otherwise there's a
    resource conflict with some other device in your system which needs
    to be resolved first as next(that's not part of this readme... ).
    5. Congrats if the dvbcam.sys driver is listed under your "Smartcard"
    You can run the loader_setup_1.3.exe now and install the UCAS package.
    The application is run by clicking the ucas_loader and in the menus
    after inserting your CAM and the beep you chose Settings -> PCMCIA ->
    CAM 0 or 1, leave one PCMCIA slot empty so there's only one choice left
    to select. Now chose your file, the file must be in *.upd-format.
    After hitting "Download Now" do not touch or do anything else - first
    it will go very quick and then slow again as if nothing is happening
    at all. This is because the new software is first written to the CAM's
    RAM and afterwards it's flashed too EEProm which takes a while - again
    do not touch during this Only if it finally tells you to remove the
    CAM then do it and reinsert. You'll hear an immediate beep again but
    the CAM is *NOT* yet fully intialized(again) so do *NOT* touch it!
    Wait for at least 30 seconds, after this you can remove your CAM(and
    close the ucas_loader) and your CAM should be working already now.
    No need to initialize again inside a receiver.

    If it doesn't work start over again. You can't do anything wrong once
    the driver is loaded and you get the beep. Also the software-loader
    inside the CAM won't be overwritten or damaged if it's already there.

    Now good luck and keep trying, it's easy once you get the hang of it
    this guide and all related files can be found on and

    now should you fail to to update it via laptop, you can also update it (not the xilinx part though) with a funcard, preferrably funcard6 or 7 (if you use smaller capacity funcards then you will need more of it). and the easiest way, is of course to purchase a Cas2/3 and use that to reprogram your CAM. you may visit the aforementioned websites for further help on what you really need to do, or simply ask here and im sure a lot of people will come up with other ideas too.
    HP-Compaq DC5000 MT 1.5GB RAM
    Debian Squeeze with Smargos
    CCcam 2.1.4



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Matrix Reloaded
    By hushy in forum RDI - English
    Replies: 3
    Last Post: 21st March 2006, 16:11
  2. Matrix Reloaded with MRB 300
    By viladys in forum RDI - English
    Replies: 1
    Last Post: 25th November 2005, 00:08
  3. Matrix reloaded
    By viladys in forum RDI - English
    Replies: 1
    Last Post: 22nd November 2005, 18:51
  4. NDS cu Matrix Reloaded ?
    By Cilu in forum RDI - Satelit
    Replies: 2
    Last Post: 2nd November 2005, 11:14
  5. matrix reloaded
    By george_bradu in forum RDI - Satelit
    Replies: 2
    Last Post: 8th October 2005, 17:44

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Back to Top