Register

Welcome to the RDI-Board Community.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.


Donate Now Goal amount for this month: 100 EUR, Received: 100 EUR (100%)
Donate to support this site...

Results 1 to 5 of 5

Thread: dbox2

  1. #1
    Complicated & Antisocial Mentor
    Join Date
    Jun 2008
    Posts
    792
    Posts Thanks / Likes

    Default dbox2

    Nu aveam de lucru, si mi-am facut.
    Am un dbox2, si mi-am propus sa-l fac server, am luat un phoenix, l-am pus pe com1 (/dev/tts/0), newcs pus in var/emu, newcs.xml in var/tuxbox/config, chmod 777 la toate.
    Code:
    	<readers name="phoenix">
    		<device>
    			<name>Interfata phoenix</name>
    			<type>dbox</type>
    			<mhz>357</mhz>
    			<node>/dev/tts/0</node>
    			<parity>even</parity>
    			<reset>normal</reset>
    			<carddetect>Yes</carddetect>
                           ................................
    Imaginea se numeste "rudbox2_nplus_squashfsjffs2_2x.img", are USALS
    Pana aici toate bune, insa, cand am pornit newcs, nu recunoaste cardul, am schimbat paritatile, acelasi rezultat
    Code:
    This is NewCS 1.65 - the New CardServer by the Butter-team..
    Compiled on Jan 19 2009 at 17:54:45
    Reading Config file from /var/tuxbox/config/newcs.xml
    NewCS is trying to bind to IP: 127.0.0.1
    TCP-log password is enabled, set to: NewCSpwd
    TCP-log set to advanced mode
    level: spam
    type: all
    output: console,tcp
    logger config: level 3 type 255 output 5
    Console log options: level 3 type 255
    TCP log options: level 3 type 255
    [ 20:27:45 ] [ Box detect ] Box type 4 (Dbox2)
    [ 20:27:45 ] [ Config ] /dev/tts/0 ECM priority: round
    [ 20:27:45 ] [ Newcamd ] Server name : NewCS
    [ 20:27:45 ] [ Newcamd ] Des key     : ....
    [ 20:27:45 ] [ Newcamd ] User 2: Dbox2, Pass: xxxx, Host 192.168.1.65, Port: 1           6000, Au: On, Spider allowed: No, Sidoverride: No, level: 1
    [ 20:27:45 ] [ Newcamd ] User 3: Cs2gbox, Pass: xxxx, Host 192.168.1.64, Port: 1           6000, Au: On, Spider allowed: No, Sidoverride: No, level: 1
    [ 20:27:45 ] [ Newcamd ] User 4: WinCSC, Pass: xxxx, Host 192.168.1.64, Port: 22           000, Au: On, Spider allowed: No, Sidoverride: No, level: 1
    [ 20:27:45 ] [ httpd ] httpd-user: xxxx, password: xxxx, accesslevel: admin
    [ 20:27:45 ] [ EMM Cache ] Initialising dynamic Cache
    [ 20:27:45 ] [ ECM Cache ] Initialising dynamic Cache
    [ NewCS ] Process ID is: 175
    [ 20:27:45 ] Calibrating delay loops
    [ 20:27:45 ] usleep(5) takes: 0 s 41 us
    [ 20:27:45 ] usleep(10) takes: 0 s 35 us
    [ 20:27:45 ] usleep(100) takes: 0 s 128 us
    [ 20:27:45 ] usleep(500) takes: 0 s 528 us
    [ 20:27:45 ] Allocation memory for 200 regular users
    [ 20:27:46 ] [ Loader ] Starting Telnet on port 20000
    [ 20:27:46 ] bind: error! 98: Address already in use
    [ 20:27:46 ] [ SockSrv ] Stopping port 20000
    [ 20:27:46 ] [ SockSrv ] Server thread started
    [ 20:27:46 ] [ Loader ] Started HTTP-server on port: 17000
    [ 20:27:46 ] [ Loader ] Reader type 4 on node /dev/tts/0
    [ 20:27:46 ] [ Dbox ] Opening device /dev/tts/0
    [ 20:27:46 ] [ Serial ] Communication mode: 8o2
    [ 20:27:46 ] [ Serial ] Adjusting to 1 stopbit
    [ 20:27:46 ] [ Dbox ] Setting Baud to 9600
    [ 20:27:47 ] [ Serial ] Read on fd 6 (len=32 timeout=5300ms)
    [ 20:27:47 ] [ Loader ] Unknown card
    [ 20:27:47 ] [ Loader ] Trying ...... (T=14)
    [ 20:27:47 ] [ Loader ] Reader type 4 on node /dev/tts/0
    [ 20:27:47 ] [ Dbox ] Opening device /dev/tts/0
    [ 20:27:47 ] [ Serial ] Communication mode: 8o2
    [ 20:27:47 ] [ Serial ] Adjusting to 1 stopbit
    [ 20:27:47 ] [ Dbox ] Setting Baud to 5713
    [ 20:27:48 ] [ Serial ] Read on fd 6 (len=32 timeout=5300ms)
    [ 20:27:48 ] [ Loader ] Unknown card
    [ 20:27:48 ] [ NewCS ] Ready to GO! :)
    Mai mult decat atat, la pornire/oprire, daca phoenix-ul este pornit, dbox-ul ramane fix cum era inainte de primirea comenzii, arata ca porneste/opreste dar nu executa comanda.
    Ce-i de facut ?
    La setari newcs, cred ca nu mai am ce sa incerc(zic eu) , ma gandesc sa schimb imaginea, ce sa pun nu stiu, poate aveti voi ideee de o imagine pt dbox2 2x care are USALS.
    Astept parerile voastre, pana atunci, multumiri anticipate
    Cumpar/colectez Caut TT-connect S2-3600/Pinnacle PCTV Pro 452e

    Vand

  2. #2
    Junior Member Master
    RDI - Board Default Avatar

    Join Date
    Oct 2007
    Location
    localhost
    Posts
    88
    Posts Thanks / Likes

    Default

    Cardul poate fi citit de alt emulator? deci problema e strict din newcs? esti sigur ca, cardreaderul functioneaza acolo la tine?

  3. #3
    Junior Member Teacher
    RDI - Board Default Avatar

    Join Date
    Jan 2007
    Location
    c:\Outside of Bucharest
    Posts
    227
    Posts Thanks / Likes

    Default

    Incercati

    <type>phoenix</type>
    <mhz>357</mhz>
    <node>/dev/tts/0</node>

  4. #4
    Complicated & Antisocial Mentor
    Join Date
    Jun 2008
    Posts
    792
    Posts Thanks / Likes

    Default

    @paulierco
    Da, sub windows, cu newcs , gbox, acamd.
    Am incercat newcs 1.65, cu card de tvr, akta, focus, gigel, toate merg, am incercat chiar si card gsm(nu cu newcs, bineinteles), si merge.
    Am incercat versiunile ppc, 1.64, 1.65, 1.66, 1,67 niciuna nu vrea.

    @HarryE2007
    Am incercat, nu vrea, chiar si sc8.

    Azi incerc alt cristal, unul de 3.68.
    Cumpar/colectez Caut TT-connect S2-3600/Pinnacle PCTV Pro 452e

    Vand

  5. #5
    Complicated & Antisocial Mentor
    Join Date
    Jun 2008
    Posts
    792
    Posts Thanks / Likes

    Default

    S-a rezolvat.
    Am pus un Xtal de 6
    Am setat newcs astfel :
    Code:
    <newCSconfig>
    	<globals>
    		<listening-ip>127.0.0.1</listening-ip>
    	</globals>
    	<readers name="phoenix">
    		<device>
    			<name>Interfata phoenix</name>
    			<type>dbox</type>
    			<mhz>600</mhz>
    			<node>/dev/tts/0</node>
    			<parity>even</parity>
    			<reset>normal</reset>
                            ........................
    "Show Bootmenu" , setat pe frame buffer
    Cumpar/colectez Caut TT-connect S2-3600/Pinnacle PCTV Pro 452e

    Vand

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to Top