Starsat Basic And Expert Methods

[emco83]

CODE
Starsat SR-X 550 D (Plus)(Super)(Ultra): DVB-S, 4000 Ch., FTA

Starsat SR-X 650 CI Plus: DVB-S, 2000 Ch., 2x Common Interface

Starsat SR-X 3500 CUCI(Plus)(Super)(Ultra): DVB-S, 6000 Ch., 2 embedded Universal CAM, 2x Common Interface

Starsat SR-X 3200 CU(Plus)(Super)(Ultra): DVB-S, 4000 Ch., embedded 2x Universal

Starsat SR-X 3100CU(Plus)(Ultra): DVB-S, 4000 Ch., 1x CAS



Starsat Family(550 650 3100 3200 3500 560)&clons:


Master Code:
9 8 7 6 or 9 8 7 6 0 0
3 4 5 3 or 3 4 5 3 0 0


Essinal note befor load new SW(software
to not lose channels simply enter the backup & restore option and select backup system then after upgrade new sw make a restore system and every htink will be fine.


Loder SW & Picture(not use it for channels
_ Tools=August_26,Tools_x550_650_3100_3200_3500
or Tools=IRDTOOL or here



SOFTCAM LOADER 100%WORK
شرح بالصور للبرنامج explanation (key editor) in English & French
http://satrecerver.9.forumer.com/index.php?showtopic=2198
[/b]

to let decoding works
press menu
go to last line( parental lock) and press ok
for serial number press numbers:
(truman= 2958)(bright = 3453)(starsat super = 345300)(Metronic K-BOX=1118)(micro-x mdr =3453)
then go out by press menu
now decoding channel works and code option appear

Loder Channels(only tow usage):

1-upload & download channels
2-reading channel file(.img) OR reading STB channels
PCEditor_v1 OR PCEditor OR here OR here or here
& to avoid problems simply do one of the tow usage once then close the program & run it again for the second usage.



1.How to enter codes menu?
How the code manually Starsat Family(550 650 3100 3200 3500 560)&clons:
according to the type of used sw u should do the following:
************************************************** *
for STARSAT SUPER = STARCOM SUPER SW:
Press____menu____installition____last line = input code press OK.
************************************************** *
for starsat ULTRA SW"
Press______menu____ press digit 1 2 3 4 & will appeare.
************************************************** *
for sony sat 9000 plus & 9800 plus SW:
Press____menu____installation_____last line = input code press OK.
************************************************** *
for sonysat 9500 SW:
Press______menu____ press digit 1 2 3 4 & will appeare.
************************************************** *
for TRUMAN SW:
to enter code menu & activate decoding:
Press____menu____lest line = Parental control press OK____enter digit 2 9 5 8 then press menu the

code option will appear and decoding begin
************************************************** *
for Bright & Micro-x SW:
to enter code menu & activate decoding:
Press____menu____lest line = Parental control press OK____enter digit 3 4 5 3 then press menu the

code option will appear and decoding begin

__________________________________________________ ______________

2.choosing the right encryption type:
encryption types are:
-Betacrypt, ******, Seca, VIACCESS, NAGRVISION, CONAX,BISS,NDS.POWRVIEW,SHL,etc.
-choosing the encryption type depend on Package u chooseed.
For POLSAT DIDITAL+ TV CABO MEDIAPARKE:is NAGRVISION
For TPS :is VIACCESS.
__________________________________________________ ______________

3.choose the right provider(four digit= XXXX):
EACH Package have special providers:
for POLSAT:7001 OR 7101
for TV CABO:4801 OR 4901
for DIGITAL+:4001 OR 4101
for MEDIAPARKE:1811 OR 1911
for TPS: 007C00

__________________________________________________ ______________

4.choose the right index(tow digit = XX):
I.FOR POLSAT DIGITAL+ TV CABO MEDIAPARKE There is indexs refer to NGRA1 &
NAGRA2:
NAGRA 1: indexs are:00 & 01 now don't change.
NAGRA 2: indexs are depend on Provider:
for first mentiomed Provider(7001-4001-4801-1811) indexs are:80 & 81.
for second mentiomed Provider(7101-4101-4901-1911) indexs are:90 & 91.
II.FOR TPS the changing keys provider are:00 & 01
__________________________________________________ ______________

5. enter the new keys(16 digits for one index line):
when u used a program to give u the latest keys(softcam.key file)
u will find that the new keys consiste of 32 digit while each index line fulled with only 16 digit &
providers given are different of what u see on your receiver(usually 00 & 01)
(IGONAR THE 128 DIGIT LINES)
SO u should do the following:
1.every 32 digit line divided to tow lines with 16 digit in each one.
2.put it in the right index as follows:
-for POLSAT DIGITAL+ TV CABO MEDIAPARKE:u will given tow lines with index 00 & 01 and

each one cosiste of 32 digit :
divid index line 00 to tow 16 line and give it the indexs:80 & 81
divid index line 01to tow 16 line and give it the indexs:90 & 91
-for TPS:divid index line 00 to tow 16 line and give it the indexs:01 & 11
ENTER THE KEYS
LISTEN other indexs of TPS rarely changed & NAGRA1 indexs of POLSAT DIGITAL+ TV CABO MEDIAPARKE rarely changed.



Clons for this family:

__starcom 550 super = starcom 550 ultra v365(the latest ok)
= sonysat 9500 = sonysat 9000 plus
= truman 100 = TRUMAN 100 SUPER
= bright 4200
= micro-x mdr 4500
= magic 2004
= D-box DB-8800
= Metronic K-BOX F


__starcom 650 super = starcom 650 ultra v365(the latest)
= sonysat 9800 plus
= truman200
= bright4400 Metronic K-BOX C


starcom 3100 super = starcom 3100 ultra v365(the latest) = TRUMAN Platinum = bright 4300
starcom 3200 super = starcom 3200 ultra v365(the latest) = TRUMAN diamond
starcom 3500 super = starcom 3500 ultra v365(the latest) = TRUMAN Gold

Important notes:
1.to be able to load different sw on your STB u should first(erase protocol)by HEX programs &replace it by letters(FFFF)as follows:
(starsat =1700)(bright=2D00)(sonysat=1500)(truman=1F00)
2.some versions may be protected by error line to not be able install on all clons.



CODE
Starsat SR-X 1500D-Super (Super MKII): DVB-S, 4000 Ch., FTA




CODE
Omax OM-R100: DVB-S, FTA




CODE
Starsat SR-X 1600 D-Super: DVB-S, 4000 Ch., FTA



starsat family 1500 1600 1900

After upgrade these stb the remotcontrol donnot work?

simply do any of the following:
1.
menu
stb setting
other setting
rcu mode
choose 04
2. do a factory restor
3.reinstall the patch



starsat 1500 1600 1900 clons ( tunner sharp)

-starsat SR-X1500D SUPER MKII
-omax-R100
-Telecom 1500 SUPER MKII
-Dream 2000
- comag sl 55
- Dansat G9+8+7
- Dansat GX: DVB-S, 4000 Ch., FTA
- Univers U-4105
- Univers U4101 - 4102
- Citizen 2000
- Citizen Sat DVB-5500 Ultra
- Starvision 5100/ 5200/ 5300/ 5400
- Boca Chess SL 55
- DSR
- Premier PRS-10100
- Premier PRS-10200
- Premier PRS-10300
- Premier PRS-10350
- Preisner SRD-1000 S/B
- Univers U4101/ 4102
-Univers U-4105 :
FTE Maximal IRD 120
FTE Maximal IRD 390 & 390M
FTE Maximal IRD 410
FTE Maximal IRD 420 & 420M
FTE Maximal IRD 420SM
FTE Maximal IRD 450 CI
Beausat BSR-900/BSR-905/BSR-911 S/BSR-2003
Citizen 2000
Boca DSR 103/DSR 104 OTA
Citizen Sat DVB-5500 Ultra
Comag DVB III FTA
Comag DVB III FTA OTA
Comag FTA 311
Comag SL-55
Porty I
SatConn DVB-2003 FTA
Satconn DVB 2000 FTA
SKT SDR-200/SDR-201/DTR-201
StarSat SR-X 1500D
StarSat SR-X 1600D
TokyoSat DVB-2300 FTA
New Star 201,
DVB 5013 oraz
DVB 5013M
Sanyo Gold
Sanyo Plus
S-DVB 9600


CODE
Starsat SR-X1700D: DVB-S, 5000 Ch., FTA

Starsat SR-X2700CI: DVB-S, 2x Common Interface




CODE
Starsat SR-X1300D: DVB-S, 5000 Ch., FTA




CODE
Starsat SR-X1800D: DVB-S, 5000 Ch., FTA

Starsat SR-X2800CI: DVB-S, 5000 Ch., 2x Common Interface





CODE
Starsat SR-X 1100 D: DVB-S, 5000 Ch., FTA


starsat family 1100 1300 1700 1800


To enter the code page:
menu
setting then press 1 2 3 4
طريقة الدخول على صفحة الكودات:
اضغط مينو ضبط النظام 1 2 3 4



To load keys ?
u should use the program (Transponder Editer ) to make appropriate key file for your loader (COMUpgrade)depending on softcam.bin file,
u should use .bin key file and use the mentoined program to convert it to the right extension then use the loader(COMUpgrade) to load it



the clones for this starsat family is:

condor 4000c 4500
=TOPSAT 5000 ULTRA = topsat5000(pal)
=ASTROVOX 160 SUPER=Astrovox VSR 2500
=beausat 2004
=echostar 900 fta
=Coship 2300
=tboston4500
=axil ad600
=truman 9000
=srt 3680
=Iris 3000= Iris3300
=Bigsat 5000=Bigsat 8000
=Visiosat TVS 4500
=Koscom DSR 5002
=Maxtronics DSR 5200
= Digisky DGS2300

note:
when u convert it to condor 4500 & astrvox:
the remote control function change which mean buttone (scan) do the following:(sat function)
_the benifit from changing to condor 4500 is biss & cryptworks decoding
ofcourse the loading sw is the same(waiting for word good)then turn off the stb then turn on then the word UCA will appear on receirver screen & the remote will not coresponde untill u press buttone(TV/AV) &continu pressing till the four zero 0000 appear and every think ia alright



A little note about loading channels :
_u should make reset factory after loading channels.



Activate decoding?
_u should activate decoding appropriate to the used sw:
beausat 2004--menu-information recepteur-2259
echostar-menu-information recepteur- 2020
for other clons try the mentioned numbers or the folowing(i don,t have the stb to try now,sorry)
7799-8686-8800


CODE
Starsat SR-X190D(DF)(D Super)(D Super F): DVB-S, 6000 Ch., FTA

Starsat SR-X3300CU(CU F): DVB-S, 6000 Ch., Emb.CAS


190+220+ +3300+3000+30+3+50+5

Master code:
2 1 4 2 or 9 8 7 6

To enter code page:
press 0

the clons for this family

starsat 190 = goldeninterstar 8001
starsat 190 super= goldeninterstar 8001s etc





How to edite the official sw file of goldeninterstar(D & S) to be able to load to starsat(D & super) device

The method simple but need carefull and attention
we need the attached file and HEX program
for example:edit goldeninterstar8001s to be pass to starsat 190 super
take the official sw of goldeninterstar & open it by hex program
then go to the end of sw as in picture
open the file:
190super to 8001s
& mark it all and copy all 190super to 8001 s in the end of sw
& same method for all clons
note:
edite the latest sw and load the new tps keys and work fine



CODE
Starsat SR-X 150 D Plus/ 200 CI (Plus): DVB-S, 2000 Ch., 2x Common Interface

Starsat SR-X 300 PVR: DVB-S, 2000 Ch., PVR 20 GB HDD, 2 Common Interface

Starcom FTA: DVB-S, FTA

Starcom CI: DVB-S, 2x Common Interface

Starcom CIP: DVB-S, 2x Common Interface, Positioner

Starcom PVRCI: DVB-S, PVR, 2x Common Interface

Starsat SR-P250CI: DVB-S, 2x Common Interface, Positioner

Omax 1000 FTA: DVB-S, FTA

Omax 2000 CI: DVB-S,




CODE
Starsat SR-X 120 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




CODE
Starsat SR-X 130 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




Starsat 120-130-150-200 family

Master code:
9876



Clones for this family(will be updated soon)
Starsat 200 ci = CONDOR 5000CI
Starsat 200 = Astra 9500 =Hivision 5000
Starsat 120-130-150 PLUS 1M = CONDOR 5000 FTA
Starsat 150 = Astra 9800
Starsat 120 = Astra 9000


CODE
Starsat SR-X 1200D: DVB-S, 6500 Ch., FTA




CODE
Starsat SR-X 1400D: DVB-S, 6500 Ch., FTA




CODE
Starsat SR-X 2200 IR: DVB-S, 6000 Ch., emb. CAS



starsat 150 super new+ 550CX +1200 1400 + 1500 ultra +2200 4000 4200 5100 5200

1) Key menu: Main Menu + 0
2) Current Key: INFO+0
3) All ECM List: INFO+1

Master code:
press menu +installation ok+stb+okpress + 9876
++++++
starsat550cx master code:
1999 or 1361

Activate decoding:
Menu + 2020

Note:
U should not load the patch unless u load first the 2 mega patch

Clones for this family: 5200 fte max s 100
echolink 700
omaxr10
Red Qmax 999
Truman xtrem2
DRAGON x



After load new sw the device halt?
1)turn off the elctricity
2)press power button in front of device for 4 seconds the leave the button& load what u want
3)make resat factory
starsat AG-R5500D :


Important notes:
1)to load latest sw u should load the latest bootloader
2)Fater load new bootloader turn the device off & don,t turn it on ,only for load sw else the flash damaged &u need j-tag
3-The difference between: TRUMAN 100 & TRUMAN 100PLUS.
_ truman 150 ultra = truman 150 = starsat 5500D = truman 100 plus
_starsat 550D = truman 100.



Clones for this device:
starsat AG-R5500D :
TRUMAN 100 plus = truman 150 ultra =TRUMAN 150 =
starsat AG-R5500D =starsat 5000 =
DSN_GR6300 =
YUMATU_MX =
astrasat-magnom =
STARTRACK 550 =
SANSUNG K864 =
NEOSAT 1600 =
BY JACK0

[yan naing]

Great job emco 83.Keep it up.


Thanks.

[georgekamal]

simply superb................

[emco83]

thanks georgekamal and yan naing
click here http://rapidshare.com/files/13594658/Starsat_Softcam.rar
to download the starsat softcam.SEX VIEW ADDED AND OTHER KEYS
ENJOY

[emco83]

and here you have the key editor
http://rapidshare.com/files/13596935/KeyEditor_for_Starsat.zip
ENJOY

[georgekamal]

and here you have the key editor
http://rapidshare.com/files/13596935/KeyEditor_for_Starsat.zip
ENJOY
thankx a lot and godbless u bro..........
very best regards-george

[jngosa]

How do I access the menu for entering codes for FTA receiver Starsat SR-x4200D asnwell as Sky X (model XX)

[scrombi]

can we upload star sat super software in micro-x mdr 4500 fta receiver, and will it get auto update code after ulpoad.

[christianity]

CODE
Starsat SR-X 550 D (Plus)(Super)(Ultra): DVB-S, 4000 Ch., FTA

Starsat SR-X 650 CI Plus: DVB-S, 2000 Ch., 2x Common Interface

Starsat SR-X 3500 CUCI(Plus)(Super)(Ultra): DVB-S, 6000 Ch., 2 embedded Universal CAM, 2x Common Interface

Starsat SR-X 3200 CU(Plus)(Super)(Ultra): DVB-S, 4000 Ch., embedded 2x Universal

Starsat SR-X 3100CU(Plus)(Ultra): DVB-S, 4000 Ch., 1x CAS



Starsat Family(550 650 3100 3200 3500 560)&clons:


Master Code:
9 8 7 6 or 9 8 7 6 0 0
3 4 5 3 or 3 4 5 3 0 0


Essinal note befor load new SW(software
to not lose channels simply enter the backup & restore option and select backup system then after upgrade new sw make a restore system and every htink will be fine.


Loder SW & Picture(not use it for channels
_ Tools=August_26,Tools_x550_650_3100_3200_3500
or Tools=IRDTOOL or here



SOFTCAM LOADER 100%WORK
شرح بالصور للبرنامج explanation (key editor) in English & French
http://satrecerver.9.forumer.com/index.php?showtopic=2198
[/b]

to let decoding works
press menu
go to last line( parental lock) and press ok
for serial number press numbers:
(truman= 2958)(bright = 3453)(starsat super = 345300)(Metronic K-BOX=1118)(micro-x mdr =3453)
then go out by press menu
now decoding channel works and code option appear

Loder Channels(only tow usage):

1-upload & download channels
2-reading channel file(.img) OR reading STB channels
PCEditor_v1 OR PCEditor OR here OR here or here
& to avoid problems simply do one of the tow usage once then close the program & run it again for the second usage.



1.How to enter codes menu?
How the code manually Starsat Family(550 650 3100 3200 3500 560)&clons:
according to the type of used sw u should do the following:
************************************************** *
for STARSAT SUPER = STARCOM SUPER SW:
Press____menu____installition____last line = input code press OK.
************************************************** *
for starsat ULTRA SW"
Press______menu____ press digit 1 2 3 4 & will appeare.
************************************************** *
for sony sat 9000 plus & 9800 plus SW:
Press____menu____installation_____last line = input code press OK.
************************************************** *
for sonysat 9500 SW:
Press______menu____ press digit 1 2 3 4 & will appeare.
************************************************** *
for TRUMAN SW:
to enter code menu & activate decoding:
Press____menu____lest line = Parental control press OK____enter digit 2 9 5 8 then press menu the

code option will appear and decoding begin
************************************************** *
for Bright & Micro-x SW:
to enter code menu & activate decoding:
Press____menu____lest line = Parental control press OK____enter digit 3 4 5 3 then press menu the

code option will appear and decoding begin

__________________________________________________ ______________

2.choosing the right encryption type:
encryption types are:
-Betacrypt, ******, Seca, VIACCESS, NAGRVISION, CONAX,BISS,NDS.POWRVIEW,SHL,etc.
-choosing the encryption type depend on Package u chooseed.
For POLSAT DIDITAL+ TV CABO MEDIAPARKE:is NAGRVISION
For TPS :is VIACCESS.
__________________________________________________ ______________

3.choose the right provider(four digit= XXXX):
EACH Package have special providers:
for POLSAT:7001 OR 7101
for TV CABO:4801 OR 4901
for DIGITAL+:4001 OR 4101
for MEDIAPARKE:1811 OR 1911
for TPS: 007C00

__________________________________________________ ______________

4.choose the right index(tow digit = XX):
I.FOR POLSAT DIGITAL+ TV CABO MEDIAPARKE There is indexs refer to NGRA1 &
NAGRA2:
NAGRA 1: indexs are:00 & 01 now don't change.
NAGRA 2: indexs are depend on Provider:
for first mentiomed Provider(7001-4001-4801-1811) indexs are:80 & 81.
for second mentiomed Provider(7101-4101-4901-1911) indexs are:90 & 91.
II.FOR TPS the changing keys provider are:00 & 01
__________________________________________________ ______________

5. enter the new keys(16 digits for one index line):
when u used a program to give u the latest keys(softcam.key file)
u will find that the new keys consiste of 32 digit while each index line fulled with only 16 digit &
providers given are different of what u see on your receiver(usually 00 & 01)
(IGONAR THE 128 DIGIT LINES)
SO u should do the following:
1.every 32 digit line divided to tow lines with 16 digit in each one.
2.put it in the right index as follows:
-for POLSAT DIGITAL+ TV CABO MEDIAPARKE:u will given tow lines with index 00 & 01 and

each one cosiste of 32 digit :
divid index line 00 to tow 16 line and give it the indexs:80 & 81
divid index line 01to tow 16 line and give it the indexs:90 & 91
-for TPS:divid index line 00 to tow 16 line and give it the indexs:01 & 11
ENTER THE KEYS
LISTEN other indexs of TPS rarely changed & NAGRA1 indexs of POLSAT DIGITAL+ TV CABO MEDIAPARKE rarely changed.



Clons for this family:

__starcom 550 super = starcom 550 ultra v365(the latest ok)
= sonysat 9500 = sonysat 9000 plus
= truman 100 = TRUMAN 100 SUPER
= bright 4200
= micro-x mdr 4500
= magic 2004
= D-box DB-8800
= Metronic K-BOX F


__starcom 650 super = starcom 650 ultra v365(the latest)
= sonysat 9800 plus
= truman200
= bright4400 Metronic K-BOX C


starcom 3100 super = starcom 3100 ultra v365(the latest) = TRUMAN Platinum = bright 4300
starcom 3200 super = starcom 3200 ultra v365(the latest) = TRUMAN diamond
starcom 3500 super = starcom 3500 ultra v365(the latest) = TRUMAN Gold

Important notes:
1.to be able to load different sw on your STB u should first(erase protocol)by HEX programs &replace it by letters(FFFF)as follows:
(starsat =1700)(bright=2D00)(sonysat=1500)(truman=1F00)
2.some versions may be protected by error line to not be able install on all clons.



CODE
Starsat SR-X 1500D-Super (Super MKII): DVB-S, 4000 Ch., FTA




CODE
Omax OM-R100: DVB-S, FTA




CODE
Starsat SR-X 1600 D-Super: DVB-S, 4000 Ch., FTA



starsat family 1500 1600 1900

After upgrade these stb the remotcontrol donnot work?

simply do any of the following:
1.
menu
stb setting
other setting
rcu mode
choose 04
2. do a factory restor
3.reinstall the patch



starsat 1500 1600 1900 clons ( tunner sharp)

-starsat SR-X1500D SUPER MKII
-omax-R100
-Telecom 1500 SUPER MKII
-Dream 2000
- comag sl 55
- Dansat G9+8+7
- Dansat GX: DVB-S, 4000 Ch., FTA
- Univers U-4105
- Univers U4101 - 4102
- Citizen 2000
- Citizen Sat DVB-5500 Ultra
- Starvision 5100/ 5200/ 5300/ 5400
- Boca Chess SL 55
- DSR
- Premier PRS-10100
- Premier PRS-10200
- Premier PRS-10300
- Premier PRS-10350
- Preisner SRD-1000 S/B
- Univers U4101/ 4102
-Univers U-4105 :
FTE Maximal IRD 120
FTE Maximal IRD 390 & 390M
FTE Maximal IRD 410
FTE Maximal IRD 420 & 420M
FTE Maximal IRD 420SM
FTE Maximal IRD 450 CI
Beausat BSR-900/BSR-905/BSR-911 S/BSR-2003
Citizen 2000
Boca DSR 103/DSR 104 OTA
Citizen Sat DVB-5500 Ultra
Comag DVB III FTA
Comag DVB III FTA OTA
Comag FTA 311
Comag SL-55
Porty I
SatConn DVB-2003 FTA
Satconn DVB 2000 FTA
SKT SDR-200/SDR-201/DTR-201
StarSat SR-X 1500D
StarSat SR-X 1600D
TokyoSat DVB-2300 FTA
New Star 201,
DVB 5013 oraz
DVB 5013M
Sanyo Gold
Sanyo Plus
S-DVB 9600


CODE
Starsat SR-X1700D: DVB-S, 5000 Ch., FTA

Starsat SR-X2700CI: DVB-S, 2x Common Interface




CODE
Starsat SR-X1300D: DVB-S, 5000 Ch., FTA




CODE
Starsat SR-X1800D: DVB-S, 5000 Ch., FTA

Starsat SR-X2800CI: DVB-S, 5000 Ch., 2x Common Interface





CODE
Starsat SR-X 1100 D: DVB-S, 5000 Ch., FTA


starsat family 1100 1300 1700 1800


To enter the code page:
menu
setting then press 1 2 3 4
طريقة الدخول على صفحة الكودات:
اضغط مينو ضبط النظام 1 2 3 4



To load keys ?
u should use the program (Transponder Editer ) to make appropriate key file for your loader (COMUpgrade)depending on softcam.bin file,
u should use .bin key file and use the mentoined program to convert it to the right extension then use the loader(COMUpgrade) to load it



the clones for this starsat family is:

condor 4000c 4500
=TOPSAT 5000 ULTRA = topsat5000(pal)
=ASTROVOX 160 SUPER=Astrovox VSR 2500
=beausat 2004
=echostar 900 fta
=Coship 2300
=tboston4500
=axil ad600
=truman 9000
=srt 3680
=Iris 3000= Iris3300
=Bigsat 5000=Bigsat 8000
=Visiosat TVS 4500
=Koscom DSR 5002
=Maxtronics DSR 5200
= Digisky DGS2300

note:
when u convert it to condor 4500 & astrvox:
the remote control function change which mean buttone (scan) do the following:(sat function)
_the benifit from changing to condor 4500 is biss & cryptworks decoding
ofcourse the loading sw is the same(waiting for word good)then turn off the stb then turn on then the word UCA will appear on receirver screen & the remote will not coresponde untill u press buttone(TV/AV) &continu pressing till the four zero 0000 appear and every think ia alright



A little note about loading channels :
_u should make reset factory after loading channels.



Activate decoding?
_u should activate decoding appropriate to the used sw:
beausat 2004--menu-information recepteur-2259
echostar-menu-information recepteur- 2020
for other clons try the mentioned numbers or the folowing(i don,t have the stb to try now,sorry)
7799-8686-8800


CODE
Starsat SR-X190D(DF)(D Super)(D Super F): DVB-S, 6000 Ch., FTA

Starsat SR-X3300CU(CU F): DVB-S, 6000 Ch., Emb.CAS


190+220+ +3300+3000+30+3+50+5

Master code:
2 1 4 2 or 9 8 7 6

To enter code page:
press 0

the clons for this family

starsat 190 = goldeninterstar 8001
starsat 190 super= goldeninterstar 8001s etc





How to edite the official sw file of goldeninterstar(D & S) to be able to load to starsat(D & super) device

The method simple but need carefull and attention
we need the attached file and HEX program
for example:edit goldeninterstar8001s to be pass to starsat 190 super
take the official sw of goldeninterstar & open it by hex program
then go to the end of sw as in picture
open the file:
190super to 8001s
& mark it all and copy all 190super to 8001 s in the end of sw
& same method for all clons
note:
edite the latest sw and load the new tps keys and work fine



CODE
Starsat SR-X 150 D Plus/ 200 CI (Plus): DVB-S, 2000 Ch., 2x Common Interface

Starsat SR-X 300 PVR: DVB-S, 2000 Ch., PVR 20 GB HDD, 2 Common Interface

Starcom FTA: DVB-S, FTA

Starcom CI: DVB-S, 2x Common Interface

Starcom CIP: DVB-S, 2x Common Interface, Positioner

Starcom PVRCI: DVB-S, PVR, 2x Common Interface

Starsat SR-P250CI: DVB-S, 2x Common Interface, Positioner

Omax 1000 FTA: DVB-S, FTA

Omax 2000 CI: DVB-S,




CODE
Starsat SR-X 120 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




CODE
Starsat SR-X 130 D/ 150 D(+): DVB-S, 2000/ 4000 Ch., FTA




Starsat 120-130-150-200 family

Master code:
9876



Clones for this family(will be updated soon)
Starsat 200 ci = CONDOR 5000CI
Starsat 200 = Astra 9500 =Hivision 5000
Starsat 120-130-150 PLUS 1M = CONDOR 5000 FTA
Starsat 150 = Astra 9800
Starsat 120 = Astra 9000


CODE
Starsat SR-X 1200D: DVB-S, 6500 Ch., FTA




CODE
Starsat SR-X 1400D: DVB-S, 6500 Ch., FTA




CODE
Starsat SR-X 2200 IR: DVB-S, 6000 Ch., emb. CAS



starsat 150 super new+ 550CX +1200 1400 + 1500 ultra +2200 4000 4200 5100 5200

1) Key menu: Main Menu + 0
2) Current Key: INFO+0
3) All ECM List: INFO+1

Master code:
press menu +installation ok+stb+okpress + 9876
++++++
starsat550cx master code:
1999 or 1361

Activate decoding:
Menu + 2020

Note:
U should not load the patch unless u load first the 2 mega patch

Clones for this family: 5200 fte max s 100
echolink 700
omaxr10
Red Qmax 999
Truman xtrem2
DRAGON x



After load new sw the device halt?
1)turn off the elctricity
2)press power button in front of device for 4 seconds the leave the button& load what u want
3)make resat factory
starsat AG-R5500D :


Important notes:
1)to load latest sw u should load the latest bootloader
2)Fater load new bootloader turn the device off & don,t turn it on ,only for load sw else the flash damaged &u need j-tag
3-The difference between: TRUMAN 100 & TRUMAN 100PLUS.
_ truman 150 ultra = truman 150 = starsat 5500D = truman 100 plus
_starsat 550D = truman 100.



Clones for this device:
starsat AG-R5500D :
TRUMAN 100 plus = truman 150 ultra =TRUMAN 150 =
starsat AG-R5500D =starsat 5000 =
DSN_GR6300 =
YUMATU_MX =
astrasat-magnom =
STARTRACK 550 =
SANSUNG K864 =
NEOSAT 1600 =
BY JACK0

dear sir ! how about starsat 2100cu? is it included in your list? are there other s/w for 2100cu possible to be loaded?

[emco83]

for christianity
yes you can download the sw
click here http://www.sharebigfile.com/file/70913/STARSAT-SRX2100CU-190107-rar.html
this is the lasw sw for your model

[georgekamal]

and here you have the key editor
http://rapidshare.com/files/13596935/KeyEditor_for_Starsat.zip
ENJOY
doesn't open the key editer.....plz post the link page........
regards-george

[emco83]

can we upload star sat super software in micro-x mdr 4500 fta receiver, and will it get auto update code after ulpoad.
that stb works with starsat 550d super and the method is the same.first clean your flash with id truman,download the sw from 550d super,then you can download the key editor for starsat.

[emco83]

and now for the sw's
click here http://sharebigfile.com/file/70927/STARSAT-SR-X1200D-1400D-V1-76---28-01-2007-rar.html
for 1200 1400 models

[emco83]

click here http://sharebigfile.com/file/70930/STARSAT-SR-X1500DULTRA--V1-54-28-01-2007-rar.html
FOR 1500D

[emco83]

click here http://sharebigfile.com/file/70937/STARSAT-SR-X150DSuper-V1-53-28-01-rar.html
for 150d model

[emco83]

in these sw's tps,premire,d+ are working 100%

[emco83]

@georgekamal
click here http://sharebigfile.com/file/70946/KeyEditor1-2-20070110--zip.html
enjoy
:)

[emco83]

d+ is working with these keys
N 4001 01 - 0E6AF8A078745482
4A2181C885E6AB08

[emco83]

explanation how to upload softcam file to receiver
click here http://sharebigfile.com/file/70960/explanation-how-to-upload-softcam-file-to-receiver-doc.html

[georgekamal]

explanation how to upload softcam file to receiver
click here http://sharebigfile.com/file/70960/explanation-how-to-upload-softcam-file-to-receiver-doc.html

thankx for all ...but till unfortunatly not able to download.....it asking code numper again and again...even after i put the code number.
regards-george

[emco83]

when you put the right code you must click on SUBMIT.not on Redraw.then you must wait 15seconds and download will be available.i've checked and everything works.
OR SIMPLY send me your e-mail

[emco83]

for sex view dcw keys click here http://sharebigfile.com/file/71481/softcam-260107-zip.html

[najmioman]

for sex view dcw keys click here http://sharebigfile.com/file/71481/softcam-260107-zip.html

dear emco83, can you help for 190d, any keyeditor for it and guide to upload it to receiver
thanks

[georgekamal]

when you put the right code you must click on SUBMIT.not on Redraw.then you must wait 15seconds and download will be available.i've checked and everything works.
OR SIMPLY send me your e-mail
till it asking code number again and again ,even after put correct code and press the "submit"..............any how ,thankx for that and here its my id...
" deepgeo1@rediffmail.com"
plz send the "editer and how to" to my id.
thankx and regards-george

[christianity]

for christianity
yes you can download the sw
click here http://www.sharebigfile.com/file/70913/STARSAT-SRX2100CU-190107-rar.html
this is the lasw sw for your model

thank you sir! question, is this s/w can AU my receiver?

[DISH]

HELP

how i can activate the code menu of srx 40D

[georgekamal]

when you put the right code you must click on SUBMIT.not on Redraw.then you must wait 15seconds and download will be available.i've checked and everything works.
OR SIMPLY send me your e-mail
dear emco i didn't received anything in my mail.......

[georgekamal]

@georgekamal
click here http://sharebigfile.com/file/70946/KeyEditor1-2-20070110--zip.html
enjoy
:)
i have downloaded ,but how to installed ? nothing happened while i try to install.....

[lalu iqbal]

and here you have the key editor
http://rapidshare.com/files/13596935/KeyEditor_for_Starsat.zip
ENJOY

hi emco83

Sorry for I disturb you but I can not dowenload this keyeditor so please help me .

[oroob1831]

.hello ,friend can any one say how i active my dansat ir-4. i load that soft were from m35m .com .but i cannot find any activate key.i know about dansat d-1/and dansat aces activate key.but i dont know about dan ir-4.pls is any one know pls help me .adn mial me .oroobpharmacy@yahoo.com.thank for all,shawkat

[emco83]

hi emco83

Sorry for I disturb you but I can not dowenload this keyeditor so please help me .

click here http://sharebigfile.com/file/70946/KeyEditor1-2-20070110--zip.html

[emco83]

dear emco i didn't received anything in my mail.......
check your mail now

[emco83]

hi emco83

Sorry for I disturb you but I can not dowenload this keyeditor so please help me .

CHECK YOUR E-MAIL

[georgekamal]

check your mail now
thank u verymuch for the help and i have downloaded but anable to install in to pc after extracted from zip file...then what can i do?(i m sorry ,i continewsly
distrubing u)
regards-george

[emco83]

If you have saved the folder to a location with a very long name, i.e. C://Documents and Settings/Your PC Name/My Documents/Your Receiver Stuff/Starsat/Tools etc
Save it to another location, for example My Documents or even directly on C:// and try and install from this new location.

[georgekamal]

If you have saved the folder to a location with a very long name, i.e. C://Documents and Settings/Your PC Name/My Documents/Your Receiver Stuff/Starsat/Tools etc
Save it to another location, for example My Documents or even directly on C:// and try and install from this new location.
thankx a lot...............

[scrombi]

click here http://sharebigfile.com/file/70946/KeyEditor1-2-20070110--zip.html


Dear,
What is the purpose for this file .

[jngosa]

:flex: I have a Starsat SR-x4200D(FTA) receiver. how do you access the codes menu?

[jngosa]

I have a Hivion 9090X receiver and screen menus look exactly like SR-x200CI Plus. are these decoders same and can i get Au for polsat, pas7/10 nagra?

[georgekamal]

If you have saved the folder to a location with a very long name, i.e. C://Documents and Settings/Your PC Name/My Documents/Your Receiver Stuff/Starsat/Tools etc
Save it to another location, for example My Documents or even directly on C:// and try and install from this new location.
now everythink is ok....but ,when i try to upload ....the keyediter says
"fail response from STB"........what can i do next?
regards-george

[emco83]

D+ PREMIERE AND TPS OK
CLICK HERE http://www.badongo.com/file/2192785

[emco83]

these days somerhing new!!! TPSbinExtract!the all procedure is to download the software
open tpsbinextract.exe
click on download tps.bin for have the files now
it give you autoupdate on the desk the tps.bin for the daily
click on auto download to download autoupdate at 5h16
click here
http://sharebigfile.com/file/80184/TPSbinExtract-rar.html

[dom06]

Emco,
On a moderate budget which model of starsat STB would you reccommend, should inlcude CI & provision to input keys.

Kindly advise
Dom06

[scrombi]

Dear users,
does ver 367 opens tps channels and for how long this software works, I mean for a week, month or how many days. I did upload it but din't open tps channels.

[emco83]

Emco,
On a moderate budget which model of starsat STB would you reccommend, should inlcude CI & provision to input keys.

Kindly advise
Dom06
MY SUGGESTION IS STARSAT SR-X550D SUPER.at the moment with the new sw 367 and softcam opens premiere,d+,tps all hacked biss channels,cryptoworks and also dcw keys are compatible on starsat(for max tv,free x tv,mct porn package)
IT OPENS EVERYTHING HACKED.NOW THIS MODEL WORKS WITH SOFTCAM
P.S.you can byu some more expensive model but it aint worth.
regards
EMANUEL

[emco83]

Dear users,
does ver 367 opens tps channels and for how long this software works, I mean for a week, month or how many days. I did upload it but din't open tps channels.
usually work for a day example 12-13.02.2007
you have to upload the tps bin
and here is the link for you
http://sharebigfile.com/file/82589/Starsat-Softcam-zip.html

[wangm]

This receiver supports cryopto and biss?

[dom06]

MY SUGGESTION IS STARSAT SR-X550D SUPER.at the moment with the new sw 367 and softcam opens premiere,d+,tps all hacked biss channels,cryptoworks and also dcw keys are compatible on starsat(for max tv,free x tv,mct porn package)
IT OPENS EVERYTHING HACKED.NOW THIS MODEL WORKS WITH SOFTCAM
P.S.you can byu some more expensive model but it aint worth.
regards
EMANUEL



Thanks Manny,
Super suggestion for STARSAT SR - X550D SUPER
Cheers

[emco83]

D+ IS OK WITH THE THIS SOFTCAM
http://sharebigfile.com/file/85980/Softcam-D--17-02-07-rar.html
ENJOY:)

[georgekamal]

D+ IS OK WITH THE THIS SOFTCAM
http://sharebigfile.com/file/85980/Softcam-D--17-02-07-rar.html
ENJOY:)
dear emco...u r really great. thankx a lot for all of ur guides.
regards-george

[emco83]

dear emco...u r really great. thankx a lot for all of ur guides.
regards-george

Thanks,George

[emco83]

also tps is auto with v368 from the company
www.satdw.com

[georgekamal]

now everythink is ok....but ,when i try to upload ....the keyediter says
"fail response from STB"........what can i do next?
regards-george
thankx emco...finally i succeed.
thankx a lot. regards-george

[emco83]

i'm happy for you.see,it wasnt hard:)
D+, PREMIERE, SRG 100% OK / BIN file tps, SPORT+, Canal+, Canal+ Sport 100% OK 19.feb click here
http://www.badongo.com/file/2268710

[emco83]

for tps bin extractor click here http://www.badongo.com/file/2268758

[refresh]

Helo Dear..
I have purchased a new starsat srx 220ci super.... but i am unable to load new software in srx 220ci super.. i get software from www.satdw.com also with emupgrade.. but in New Software there in only one bin file, when i try to download .,,a message appeares.. it is not a correct file....please me ...thanks.

[refresh]

Helo Dear..
I have purchased a new starsat srx 220ci super.... but i am unable to load new software in srx 220ci super.. i get software from www.satdw.com also with emupgrade.. but in New Software there in only one bin file, when i try to download .,,a message appeares.. it is not a correct file....please me ...thanks.

dear Emco I am still waiting

[emco83]

dear Emco I am still waiting
i allready answered on your topic for your stb on satdw.com download this file it should work.
SR-X220CI-SUPER-F-16Feb2007.zip 1195.32 KB 2/16/2007 11:54:10 PM ZIP
also you got there GUIDE TO DOWNLOAD

[emco83]

if it dont work click here for the new loader http://sharebigfile.com/file/87435/STBDownload-ver1-9-3--zip.html
and here for how to download http://sharebigfile.com/file/87436/How-to-download-180-190-220-zip.html

[emco83]

and specially for you refresh tps key for 20 feb click here http://sharebigfile.com/file/87445/tpsKey-20FEB2007--zip.html

[emco83]

new sw for starsat 4100 (23 feb) with tps auto and d+ auto
click here http://sharebigfile.com/file/91327/starsat-SRX4100-230207-rar.html
enjoy

[emco83]

sw for starsat 4000 4200 NEW!
D+ AUTO UPDATES & TPS AUTO UPDATES & POLSAT TVN TURBO OK & TV-CABO AUTO UPDATES & Premiere OK AUTO @ MTV OK & BISS OK @ CW OK AND UPDATES ALL OK FULL UP KEY
click here http://sharebigfile.com/file/91329/sw-1--v1-3-3-022207-zip.html

[emco83]

orf is back also d+ and cabo
click here http://sharebigfile.com/file/91334/SoftCam-D--Cabo-ok-22-1--2-07-zip.html
ATENTION:this softcam is for starsat 550d----3500 families

[emco83]

D+ok & all new updates.DATE 25.FEB
CLICK HERE http://sharebigfile.com/file/93102/D-ok---all-updates-rar.html
ENJOY:)

[emco83]

new sw for sr-x3d click here http://sharebigfile.com/file/93253/SR-X3D-26Feb2007-zip.html

[emco83]

for sr-x5d click here http://sharebigfile.com/file/93256/SR-X5D-26Feb2007-zip.html

[emco83]

sr-x220ci click here http://sharebigfile.com/file/93267/SR-X220CI-26Feb2007-zip.html

[emco83]

Feel Free To Ask For Sw For Other Models
-emco83-

[emco83]

From Now I Will Put Sw And Answer The Question On My New Topic "starsat Updates Q&a And More"

[Aliraza63]

is there any key updater or loader for Starsat 1500D super MKII?
plz

[mtiqbal]

Dear. Is the latest release available (7th Feb) on satdw.com is TPS auto. If yes how to get it. I downloaded latest SW but still TPS down.

[emco83]

my answers will be given in my topic starsat updates Q&A and more

[yan naing]

Dear. Is the latest release available (7th Feb) on satdw.com is TPS auto. If yes how to get it. I downloaded latest SW but still TPS down.

Here is Mr.Emco's mention thread http://www.rdi-board.com/showthread.php?t=45207&page=3.

[pondyguy]

dear emco

i have starsat sr-x120d plus, please give me the loader and software and activation password,

waiting for u r reply,

thanks take care
bye

[emco83]

click here and you will find my answer http://rdi-board.com/showthread.php?t=45207&page=3

[skycom]

I have skycom fta 7270 receiver and I came to know that this is the same model of world in box receiver. If I want to update the software which one is suit for the skycom.
Please advice me

[georgekamal]

the clones for this starsat family is:

condor 4000c 4500
=TOPSAT 5000 ULTRA = topsat5000(pal)
=ASTROVOX 160 SUPER=Astrovox VSR 2500
=beausat 2004
=echostar 900 fta
=Coship 2300
=tboston4500
=axil ad600
=truman 9000
=srt 3680
=Iris 3000= Iris3300
=Bigsat 5000=Bigsat 8000
=Visiosat TVS 4500
=Koscom DSR 5002
=Maxtronics DSR 5200
= Digisky DGS2300

note:
when u convert it to condor 4500 & astrvox:
the remote control function change which mean buttone (scan) do the following:(sat function)
_the benifit from changing to condor 4500 is biss & cryptworks decoding
ofcourse the loading sw is the same(waiting for word good)then turn off the stb then turn on then the word UCA will appear on receirver screen & the remote will not coresponde untill u press buttone(TV/AV) &continu pressing till the four zero 0000 appear and every think ia alright



A little note about loading channels :
_u should make reset factory after loading channels.



Activate decoding?
_u should activate decoding appropriate to the used sw:
beausat 2004--menu-information recepteur-2259
echostar-menu-information recepteur- 2020
for other clons try the mentioned numbers or the folowing(i don,t have the stb to try now,sorry)
7799-8686-8800
after that...my remote doesn't works....even i have done as u told in above! any guides?

[georgekamal]

after that...my remote doesn't works....even i have done as u told in above! any guides?

mr.emco...where r u?

[bosra2000]

thank u alot

[quickpostal]

sr-x220ci click here http://sharebigfile.com/file/93267/SR-X220CI-26Feb2007-zip.html

TO EMCO83:

HI EMCO83,

I HAVE PURCHASED A NEW STARSAT SR-X90 USB LAST WEEK TO REPLACE MY OLDER STARSAT SR-X200 CI AND STRONG SRT-4620 SINCE THEY NO LONGER OPENED CRYPTED CHANNELS.

THE SELLER PROMISED THAT TSR-X90 USB IS CAPABLE OF OPENING NATIONAL GEOGRAPHIC AND REALITY CHANNELS. BUT, IT IS NOT!
ALTHOUGH MULTIVISIONS AND CERTAIN OTHER CRYPTED CHANNELS ARE OPEN, NAT. GEOG. DOES NOT OPEN AND ONLY 2 REALITY CHANNELS OPEN AND THERE IS ONLY SOUND ON THE STYLE NEWTWORK.

DO YOU KNOW WHATS WRONG WITH THIS NEW STB?:(
DO I HAVE TO RETURN IT TO THE SELLER FOR FALSE PROMISE?
WHAT SHOULD I DO TO WATCH NATIONAL GEOGRAPHIC ON EITHER SR-X90 USB, SR-X200 CI AND STRONG SRT 4620?

PLEASE CLARIFY AND HELP...

(BTW, I HAVE 2 DISHES POINTING TO NILESAT AND HOTBIRD)

THKS
QUICKPOSTAL

[Loverboyharry]

Hi Guys i have astrovox VSR-2600 Fta plus i need to see a sex view all channels on it how can i put those codes on my receiver to decode these channels im recide in UAE please help me out.