View Full Version : Super-CI 6000/6200 Plus HelpLine
After entering new keys in Super-CI 6000 Plus I lost the CNN on hotbird 13*e 12597,,,,whereas it is working on 12322.I want to know if anybody is watching CNN on 12597?
Supermax 6000 plus and 6200 are using same s/w :idea:
khawaja007
24-07-2004, 08:44
Hello,
Masood Upgrade ur Channed Data Ur Problem will be SOlved....
U will not find Channel Data any where so first upload channel data from any other Receiver.......
if this is just the problem of channel data, you can upload latest channels list to your receiver by SetEdit software (http://www.setedit.com) and latest channels list can be downloaded from SatCoDx website.
Or just delete the channel and re-scan it !
boknoy_ph
24-07-2004, 10:33
Masood,
still working with the old keys on cnn as before. the previous days, even my bbcprime was not working so what i did was delete the satellite channel list (all of hotbird) and did a rescan (as mentioned by Saed). now all channels are as good as they were before.
@masood
the link i give is for SatEdit, it is a golbal satellite channel editor works for allmost all of the receivers.
amjadindus
24-07-2004, 21:06
@Saed
Nice link for channel data editting. But Supermax has its own editor.
anyway we get always cool links from you .
amjad
After loading file go to "STB Information" press "OK". STB Information will appear. Press RED BUTTON from remote control, Password window will appear. Give password " 5790 ". CAS SYSTEM is on now ....................Enjoy!
@ masood sahib,
Dear friend when you set your receiver to Factory Default all TP Data given by user will finish. To save your new TPs there is a way..........................Follow this procedure to save new TPs.
First put all new TPs into your receiver by remote control
Then connect it with PC through RS232
Then Upload CHD Data
Then Download CHD data with the help of DTSLink40B_User.exe to your SuperMax 6000CI Plus. (save it in your PC for ...ure use)
Now all new TPs are saved as Factory Default . Whenever you set it on Factory Default all new TPs will never finish..........Enjoy
amjad
Dear Masood,
I'm watching CNN on HB 12597 and 12322.I have the same 6000CI.I have checked now for key for CNN on 12597 and my receiver shows TPS ID 0x07c00 and key 0x08.So check and enjoy.
Sultan Gondal :roll:
Dear Masood,
After many months I have the hanging problem again in my super CI 6000 Plus.Before this ,I was upgraded my receiver in this way,first I upgraded with sw v603d and then 607b au polsat but after approx 2 months I am facing the same problem from yesterday.I was very happy that I have solved the problem but ?
Please tell me solution.Thanks.
Sultan Gondal
Amjadindus!,,have you any file chd(updated) I may enter into my receiver,,,to enter 90 TPs is not an easy job,,,I want to get benefit from your experience,,,This receiver made me very upset,,,I can't do anything according to my wish,,,I can't rename, add,or delete the sats.Opentel was the great receiver,,,,I could do what I wanted to do,,,but supermax is not supporting all those utilities.Do you have Editor for this receiver?
Thanks in advance to co-operate.
Masood
bigcharlie
25-07-2004, 07:32
saeed
SatEdit, it is a golbal satellite channel editor works for allmost all of the receivers
Cannot find link 4 sat edit. Pls tell me where it is. :(
thanks
find it on the fifth post from the top
any one have chd file plz send me
Rizwan
:wink:
:arrow: rizvi99@hotmail.com
Ary Masood Bahi
ab jub kay manzil kay kareb ho gay hain to ap edhr udhar kay rasty bta rahy hain haan
please if u have send on my email vary small work just click away haan
i am online 10 mints more plz plz
Rizwan
rizvi99@hotmail.com
Rizwan,,,,I am also a new user on this receiver and I don't have more experience,,,how can I guide you,,when I am learner by myself,,,plz let
Amjad ,Furrukh or someone else should come so we could get benifit .
Munzil aur qareeb aa rahi hai,,,,,,don't be disappointed :wink: .
yes yes yes now i think i will done but no upgrade/vin/ or any file attached find when i unzip but any i will try may be that will work
bye
Rizwan
yes yes yes now i think i will done but no upgrade/vin/ or any file attached find when i unzip but any i will try may be that will work
bye Rizwan
Rizwan Bhai,,,I already told you that you don't need any file for keycode s/w ,,,I want to make amendments and thatswhy I was wanting those files.You forget those files,,,,NO NEED AT ALL.
Will see you later.
Masood
vary vary bad not done same :cry:
now i am trying to copy from any other same stb then see what happen
:cry:
vary vary bad not done same :cry:
now i am trying to copy from any other same stb then see what happen
:cry:
I was asking you again and again to wait for experts and you didn't,,,now do that what you want to do.Upgrading is not a difficult job,,,it is very simple.
amjadindus
26-07-2004, 15:16
Dear Masood sorry for late comming. I was busy. I have sent you CHD file for SuperMax600CI Plus. Many new transponders are in it but some may not cuz I made this file some days before.
Procedure is also with it. So, check you inbox please.
amjad
Dear Masood sorry for late comming. I was busy. I have sent you CHD file for SuperMax600CI Plus. Many new transponders are in it but some may not cuz I made this file some days before. Procedure is also with it. So, check you inbox please.
amjad
No problem,,,Amjad the great ,,,thanks for sending me file but I couldn't receive so far,,,,you sent me on my email address?
amjadindus
26-07-2004, 16:50
@ masood
sorry friend I posted in the forum before sending. But when I checked for your email address there was nothing in your profile :shock:
Now I uploaded for you at
http://www.geocities.com/amjadindus/index.htm
Bundle of thanks Mr.Amjad ,,,I have downloaded the file and will work on it later,,,and then we will talk ,,,plz read the post of Sultan and give him piece of advice,,,
By the way,,,my profile is having all things I entered.
Dear Sultan ,,,I downloaded but not opening with win rare,,,,may be downloading problem,,,there were two files,,,*.chd and *.doc,,will tell you after downloading again,,thanks
amjadindus
27-07-2004, 15:11
Dear masood,
It is zipped with WinZip-9.Try to open it with WinZip 9. Download WinZip from
http://download.winzip.com/winzip90.exe
amjad
Thanks Amjad for guidence,,,I will try to do that
Dear masood,It is zipped with WinZip-9.Try to open it with WinZip 9. Download WinZip fromhttp://download.winzip.com/winzip90.exe
amjad
I have just downloaded it that was more than 2mb and tried to open the *.doc file but it gives illegal messages and doesn't open. Will try after some time and will tell you then,,
It is zipped with WinZip-9.Try to open it with WinZip 9. Download WinZip fromhttp://download.winzip.com/winzip90.exeamjad
Sorry Amjad Dear,,,,after installing winzip 9 it didn't work,,,,gave illegal operation while clicking on *.doc file and *.chd file is not being unzipped by Winzip9,,,,will have to produce new variety,,,,,plz simply email me on
masood@grt.pol.com.pk
@Sultan,,,I will send you later after checking the files.
Khawaja Farrukh is not coming online for last two days ,,,
Ok,,,dear allah hafiz
you are right to say Dear Sultan,,,but that file is updated by Amjad and we may save our time,,,,and he is an experienced person.
I will require the *.chd file from Amjad.
I never uploaded the file by myself,,,,it is not difficult but I didn't try for that,,,,did you try ever?
khawaja007
28-07-2004, 08:19
Hello masood,
Sorry for late. I have mailed the .Chd in ur account masood@grt.pol.com.pk
Just the Procedure is
Open Link 4.0
Go to Link
Connection,
Standby ur receiver
File Open ur .Chd file
In last go to
LInk Download Chd Data
Thanks Mr.Farrukh,,,,I have received your file and am going to download in my receiver,,,,just now,,,will give you report later,,,thank you very much.
Dear Farrukh and Amjad
I have downloded the *.chd file successfully,,,but that is same as I am having in my receiver,,,I need "edited" *.chd file,,,and is there any editor to update *.chd file?I want to delete unwanted sats from this *.chd file.
@Sultan,,,how we can edit *.chd file ,,,,did you do that ever?
Amjad and Khawaja Farrukh if you have such s/w plz inform.
thanks in advance.
@Amjad told me that first insert all TPs thru RCU and then upload from the receiver and then the same file download into receiver?
Mohtaram Sultan Gondal ,,,First of all Thanks for guidence,,,Secondly the things you have written, are creating confusions.....let me tell you in detail,,,as you mentioned in above "First you run DTS Link 4.0B and connect your receiver with your PC through RS232.Now go to the tool bar of DTS link.Place your cursor on Seventh icon" whereas toolbar of DTS link is having only 5 icons(Connection,Set port,Upgrade Software,Upload CHD data and Download CHD data)I am using the same software ver.DTS Link 4.0B as you wrote in your post.The question arrises If I don't connect the STB it is not possible to edit the CHD file? I loaded the file sent by Farrukh and tried to edit but I couldn't understand the way how to edit and now the method you are telling me that is not different one.May be I could edit this file "alive"when STB is connected with PC.I will check it in spare time.Any how thanks a lot for instructions.
And what about hanging problem with your STB?
Sultan you are missing today,,,,I need your help ,,I raised my question here
http://www.gccadm.net/forum/viewtopic.php?t=10545 if I found any reply will tell you.
amjadindus
31-07-2004, 06:40
Sorry again for late comming. Dear masood thank you for appreciation.
I'm confused that why archieve was not opened with WinZip9. Anyhow I uploaded unziped file now for procedure and zipped file for channel data. You can get both from here
PROCEDURE HOW TO LOAD
http://www.geocities.com/amjadindus/Procedure.doc
CHANNEL DATA
http://www.geocities.com/amjadindus/Amjad.zip
Yahoo Geocities is unable to upload .rar or .chd extension files. Please try to download this and I'll send you Unzipped file of channel data also.
amjad
Thanks for helping ,,,Amjad
might be busy in job,,,will try to do as you guided me.
will report you later
@Sultan plz check it
http://www.gccadm.net/forum/viewtopic.php?p=52923#52923
Hi masood,so this is your hidinfg place. I can see so many " apnay log" here. Should we " export" them " there" :fish:
Hi masood,so this is your hidinfg place. I can see so many " apnay log" here. Should we " export" them " there" :fish:
Welcome to RDI Jogi jee,,,we can't do that against any body's wish and will.We are here friends and we have to care eachother's happiness.
Hi masood, I totally agree with you, this could only happen if people here like to join us there. If I can visit and write here,so can people from this forum do. I think , I an going on my rooftop and call everybody here to visit us there. :D
http://www.yatoula.com/gif/animaux/animaux_243.gif
Hi masood, I totally agree with you, this could only happen if people here like to join us there. If I can visit and write here,so can people from this forum do. I think , I am going on my roof top and call everybody here to visit us there. :D
http://www.yatoula.com/gif/animaux/animaux_243.gif
No need to climbing the roof Jogi Jee,,,,we agree with you and we will visit that section too,,,,,but we will like to be IRDs.
Hi masood, I totally agree with you, this could only happen if people here like to join us there. If I can visit and write here,so can people from this forum do. I think , I am going on my roof top and call everybody here to visit us there. :D
http://www.yatoula.com/gif/animaux/animaux_243.gif
No need to climbing the roof Jogi Jee,,,,we agree with you and we will visit that section too,,,,,but we will like to be RDIs.
I am facing same problem with Super-CI 6000 Plus,,,Javed Khan
By pressing updating button there is problem with only two digits ,,rest all keys are okay.
We will have to wait for new s/w after 607b from company.
By pressing updating button there is problem with only with one digit ,,rest all keys are okay.
@Sultan you are too much busy ,,,,I think@
Is there any progress with this receiver?
Hi sultanpk, why you stop visiting us " over there",we have got an other place aslo...do you like to know the address...some of the guys have start meeting on another place also.. :)
Hi sultanpk, why you stop visiting us " over there",we have got an other place aslo...do you like to know the address...some of the guys have start meeting on another place also.. :)
Welcome "Master" Jogi jee,,,thanks for visiting ,,,where is kala naag?I mean Cobra?
He is permanent member of our "Gang"...I will not let him run.
@Sultan,,,I didn't get chance to visit Lahore still,,,,I have noted your given address,,Don't worry,,I will inform you ,,and today when I autoupdate Supermax it gives me only one digit difference,,,We will have to wait for latest Version of Pol autoupdate s/w
@Khan thanks for information
Hi sultanpk, why you stop visiting us " over there",we have got an other place aslo...do you like to know the address...some of the guys have start meeting on another place also.. :)
Welcome "Master" Jogi jee,,,thanks for visiting ,,,where is kala naag?I mean Cobra?
He is permanent member of our "Gang"...I will not let him run.
@Sultan,,,I didn't get chance to visit Lahore still,,,,I have noted your given address,,Don't worry,,I will inform you ,,and today when I autoupdate Supermax it gives me only one digit difference,,,We will have to wait for latest Version of Pol autoupdate s/w
@Khan thanks for information
hI " teacher ji", here is naag devta, by the way did you check that pushto dance link I pm you , it is lot of " good" stuff I put over there. :lol:
http://www.yatoula.com/gif/animaux/animaux_243.gif
[quote="jogi"]hI " teacher ji", here is naag devta, by the way did you check that pushto dance link I pm you , it is lot of " good" stuff I put over there. :lol:
Sorry Jogi Jee,,,I couldn't watch,,,,plz give here the link once again if possible.
check here, and enjoy, :lol:
http://www.rdi-sat.com/f2/viewtopic.php?t=21641&postdays=0&postorder=asc&start=0
Last day polsat was not coming to me,,,I tried to update by pressing green button and I wondered ,,,when I was watching all channels on 12322 and 12380,,,,It made me so excited,,,I wanted to aware the users of Supermax,,,,but after 5 mintues,,,picture got still,,,,I pressed the green button again and I found the autoupdate was working.
B4 pressing the green button I was observing the keys as well,,,,those were updating in real.
After few period again,,,,the screen became black,,,after that I tried to update "polsat"but it didn't work again.
@khan2ton,,,,can you explain the reason behind?why it happened?
@Sultan,,,you didn't tell me about your receiver,,what happened,,,,flash rom is ok now?
Plz let me ,,,,may be I visit the places you told me,,,at Lahore
superia4u
18-08-2004, 08:10
plz tell me .................. is the problem of Polsat solved or not .................
plz plz plz
plz tell me .................. is the problem of Polsat solved or not .................plz plz plz
no,,not yet
Congratulation being Mentor,,,Superia[/img]
congratulation to superia4u for his promotion to " mentor" :rdiband: , but don't forget to visit "other place" :)
Congratulation to Superia4u
@Masood
Congratulation on your successfull helpline. Pls. ask Fanta to make it sticky. and Pls, make posts more fastly we wana see you mentor also asap.
:lol: http://primeevil.spectraweb.net/images/smilies/hop.gif
superia4u
18-08-2004, 15:53
plz tell me .................. is the problem of Polsat solved or not .................plz plz plz
no,,not yet
thanks for answer
Congratulation being Mentor,,,Superia[/img]
thanks ............ hope to see u as well a Mentor .....
congratulation to superia4u for his promotion to " mentor" :rdiband: , but don't forget to visit "other place" :)
thanks jogi jee .................. i will not forget to visit " other place""
Congratulation to Superia4u
thanks saed ..........
take care all of u
and
GOD bless u All
@Masood
Pls. ask Fanta to make it sticky. and Pls, make posts more fastly we wana see you mentor also asap.
:lol: http://primeevil.spectraweb.net/images/smilies/hop.gifI don't want to disturb the sleeping ppl...let them ENJOY :lol:
[hope to see u as well a Mentor .....GOD bless u All
I will wish to be a "friend" ONLY,,,,it is my great desire.
If I get chance again,,,I will like to see you upto 40 posts,,,, :lol: :lol: :lol:
superia4u
19-08-2004, 06:21
I will wish to be a "friend" ONLY,,,,it is my great desire.
If I get chance again,,,I will like to see you upto 40 posts,,,, :lol: :lol: :lol:
:lol: :lol: :lol: :lol: :lol: :lol:
i m waiting for the " Hafta-e-Safai" ................ then may be ur desire to see me at 40 will be accomplished .........
:oops: :oops: :oops: :oops:
WHO CAN I SEE THE POLSAT IN SUPERMAX PLUS AND CNN
ranajee_87
01-09-2004, 05:53
Must be Give That I id 7001 f you want to see POLSAT
Nagravision -ID 7001
Provider 00
key: CC 27 8B D7 34 40 28 0F
---------------------------------
Provider 01
key: 77 24 83 2A C7 50 2E BB
---------------------------------- :P
Must be Give That I id 7001 f you want to see POLSAT
Nagravision -ID 7001
Provider 00
key: CC 27 8B D7 34 40 28 0F
---------------------------------
Provider 01
key: 77 24 83 2A C7 50 2E BB
---------------------------------- :P
Welcome to RDI,,,We want to make our receiver Polsat AU.and thatswhy we need new s/w
@Sultan ,,,I have sent you old version of supermax ,,,let me confirm after installing if problem solved?
Your "butt" has been banned.
Thanks for quick reply,,,,Sultan sahib.
JavaidVIP is a quite gentleman,,,,He admitted his mistake,,that is enuff.
He will continue his efforts as usual.
My observation is not too bad. :?
New sofware for Supermax receiver has been released and it is much better than earlier.
you may download it by clicking
http://www.newprog.net/
600 AUTO 08-09-2004 is the proper s/w for Super -CI 6000 Plus.
After downloading and unzipping the file,,,,
1.Run the file IS_Links11B
2.Click on the "downloading program"(bulb)button.
3.Select the 5512_NO_Boot SSm3,,,file and click on download.
4.Downloading will be carried out successfully. :wink:
wahidshah
10-09-2004, 12:25
Thanks Massod for providing us the link to SuperMax6000 newsoftware.
Regards
mianamir
10-09-2004, 13:58
Dear Masood,
Thanks Once Again For Ur Gr8 Help to providing Us Latest S/W For 6000 Ci Plus, But Sir I Have A Problem To Upgrade This S/W, I Receive Error Msg During Upgrading Procedure.
Please Help!!!!!
Hi all the RDI members,
Well said by Mr.Masood,this sw version is totally changed and all with new features but there is a flaw in this version that the Zee package is not working,yet.But polsat auto is ok.If anybody watching zee package e.g. Zee MGM,Zee English,zee tv etc.etc through this software,please inform to all other members.
@Dear & Respected Masood sahib,I think that you are angry with me due to Faysal Butt.I'm sorry for that.Please ignore my that mistake.I shall be very thankfull to you for this.You are avery senior and respected member.Sorry,again.
Sultan Gondal :D
Dear Sultan Gonadal! I was worried to miss a nice person,,,but now I'm happy to read your views.Dear !we are friends here and I will prove myself a friend indeed insha allah.
We will carry on experiments on Zee package and will inform.
But Sir I Have A Problem To Upgrade This S/W, I Receive Error Msg During Upgrading Procedure
Plz tell me in detail,,,we will try to sort out your problem definitely.Don't worry.
mianamir
10-09-2004, 19:07
Dear Masood,
I Want to Upgrade My Receiver Supermax 6000Ci, So I Download New File From Your Site and Unzipping the File,
Run the file IS_Links11B ,
Click on the "downloading program"(bulb) button,
Select the 5512_NO_Boot SSm3, file and click on download,
But I Received Error Message, i Can't Upgrade my Receiver.
pleeeeeese help me :( :( :( :( :(
Thanx.
My all friend this not MASOOD webpage this registered from supermax DUBAI.
and masood making people again dunkeys
the http://www.newprog.net/
complet detals from me side for all.. the web site complet history.
masood heya u ready to make website with 1080 us doller
Global Net Access, LLC pay per one year to server 1080 us doller
and u all time searching for freeeeeeeeeeeeeeeeeeeeeeeeeee
DOMAIN NAME: http://www.newprog.net/
IP ADDRESS:65.254.44.194
registered by:::Global Net Access, LLC..(DUBAI UNITED ARAB EMARAT)
Alhirakee Trading
Dubai City
Dubai, DXB 27208
AE
Domain Name: NEWPROG.NET
Administrative Contact -
M.yasin Alhirakee - hirakee@hotmail.com
Alhirakee Trading
Dubai City
Dubai, DXB 27208
AE
Phone - 971504550755
Fax - 97142249233
Technical Contact -
M.yasin Alhirakee - hirakee@hotmail.com
Alhirakee Trading
Dubai City
Dubai, DXB 27208
AE
Phone - 971504550755
Fax - 97142249233
Record update date - 2004-03-18 11:50:01
Record create date - 2004-03-18
Record will expire on - 2005-03-18
Database last updated on - 2004-09-10 14:09:20 EST
HA HA HA MASOOD YOU ARE REAL SHAME FOR PAKISTANIS....
WHAT IS YOUR NEXT PROGRAMM TO MAKE PAKISTANI FRIEND DUNKEY
Dear Masood,
I Want to Upgrade My Receiver Supermax 6000Ci, So I Download New File From Your Site and Unzipping the File,
Run the file IS_Links11B ,
Click on the "downloading program"(bulb) button,
Select the 5512_NO_Boot SSm3, file and click on download,
But I Received Error Message, i Can't Upgrade my Receiver.
pleeeeeese help me :( :( :( :( :( Thanx.
first of all let me clear you ,,I don't have any site,,,and second
plz upgrade your receiver by giving boot make 0029 hex file,,,,
after that plz adopt the above method again and make sure receiver is in standby mode.First When you will upgrade by giving hex file it will come in 0029 mode and will not go in standby mode,,,,Don't worry at all and upgrade it with second file (mo0022.hex)as mentioned in above.
HA HA HA MASOOD YOU ARE REAL SHAME FOR PAKISTANIS....
WHAT IS YOUR NEXT PROGRAMM TO MAKE PAKISTANI FRIEND DUNKEY
_________________
Zahirsb, if you are a gentleman, you should apologize to masood for using such bad words.By the way what is your problem..in every thread you are discussing masood. Masood did not say that downloading site is his site. He just told others to download S/W from there.I don't find anything wrong with that.He is helping other .If you call other people "friends", then you should stop throwing shit on masood and instead start helping others.I think this would be good for the forum members and yourself.But the post you are sending here against masood are not going to do any good to you or anybody else. :x
BlackRose
11-09-2004, 06:25
When is it the time that a Admin take action.
How long we have to wait and see how this forum is going to rack and ruin.
May be some one has to translate it in romania language
Admin you are a shame for your own forum. :oops:
:arrow: Please wake up man! :idea:
When is it the time that a Admin take action.
How long we have to wait and see how this forum is going to rack and ruin.May be some one has to translate it in romania language
Admin you are a shame for your own forum. :oops:
:arrow: Please wake up man! :idea:
@BlackRose !We shouldn't loose our temper,,,we have to share knowledge.Members are good judge,,,they know who is wrong and right,,,Let Admin should enjoy.
@BlackRose !We shouldn't loose our temper,,,we have to share knowledge.Members are good judge,,,they know who is wrong and right,,,Let Admin should enjoy.
@masood,
if you don't have the courage to say what is wrong or how you think that could be improve then I can just say, good luck to you. :bash:
Dear Masood Bhai,
Thank God that you are not angry and also thank you for responding me.I'm very happy to read the message here posted by Jogi Jee.Salam to jogi Jee.Please inform me when you find out any solution for zee package.
Regards,
Sultan Gondal :smoke:
Dear Sultan Gondal,,,Be happy yaar,,some one told me that by adding conax keys we can enjoy 12577 at 13*e,,, :wink:
Do you want ,,,should I tell you "khul kay"?
Try to understand ,,,,I'm talking about "those" channels.
@Jogi jee,,,it is not a new case,,,,we are habitual.It is our home and God bless our home,,,,We are waiting for admin to get up after a sound sleep.
i have dw the sw
but there is no loader file
plz tell me where from i will get the loader
thanks
i have dw the sw
but there is no loader file
plz tell me where from i will get the loader
thanksAfter unzipping you will find an hidden file IS_Link 11b
that is loader.
tech_man20
13-09-2004, 18:51
New sofware for Supermax receiver has been released and it is much better than earlier.
you may download it by clicking
http://www.newprog.net/
600 AUTO 08-09-2004 is the proper s/w for Super -CI 6000 Plus.
After downloading and unzipping the file,,,,
1.Run the file IS_Links11B
2.Click on the "downloading program"(bulb)button.
3.Select the 5512_NO_Boot SSm3,,,file and click on download.
4.Downloading will be carried out successfully. :wink:
Can you please send me the same software at the following address because i tried the link but it's not opening.
Thanks a lot in advance
E-mail: hakeemakhtar21@hotmail.com
Techman ,,,plz try to download ,,it is working now,,,I have just downloaded.If not ,,then let me know,,I will send you immediately,,you may call me at 0433-510815.
tech_man20
14-09-2004, 18:21
Techman ,,,plz try to download ,,it is working now,,,I have just downloaded.If not ,,then let me know,,I will send you immediately,,you may call me at 0433-510815.
Dear Masood,
I downloaded the softwares but when i try to extract the ZIP files it gives an error message that the file is corrupted or invalid .
Please tell me why is it happening.
Thanks a lot in advance
javaidvip
14-09-2004, 20:06
HELLO RESPECTED FRINEDS
CALL ME NOW ALL SOFTWARE UPGRADE PROBLEM SLOVE
JAVAID TARIQ KHAN
HELLO RESPECTED FRINEDS
CALL ME NOW ALL SOFTWARE UPGRADE PROBLEM SLOVE
JAVAID TARIQ KHAN
Thanks for sincere offers,,,Dear Javaid.
We will call you definitely when we will be needed.
Plz continue your efforts as you were doing b4,,,,no file is being uploaded on yahoo group.Maintain it,,,plz.
@Techman!I have emailed you the new file ,,,,check your mailbox.
@Sultan!Plz let me know the exact link,,,,,Jogi naal naheen jana? :)
(Don't want to go with Jogi?)
khawaja007
15-09-2004, 08:59
Hello ,
Well new file hasnt got any thing abt 12577 coz that is shl. and this file has only addition of conex with this u can try canal+ series. thats working i have tried. but u have to download MOMO.cas.
specialist
15-09-2004, 11:54
Dear Masood Bhai,
Thank God that you are not angry and also thank you for responding me.I'm very happy to read the message here posted by Jogi Jee.Salam to jogi Jee.Please inform me when you find out any solution for zee package.
Regards,
Sultan Gondal :smoke:
Dear Sultan Gondal,,,Be happy yaar,,some one told me that by adding conax keys we can enjoy 12577 at 13*e,,, :wink:
Do you want ,,,should I tell you "khul kay"?
Try to understand ,,,,I'm talking about "those" channels.
@Jogi jee,,,it is not a new case,,,,we are habitual.It is our home and God bless our home,,,,We are waiting for admin to get up after a sound sleep.
Hey Masood Butt,
Why r u making people's fool? How could u say that u may watch Fullx package after using conax keys? U know about something about fullx? Full x is running on Neotion shl system, not by conax damned. Can u not serve money to get origional subscription for fullx?
I think u cann't afford. U should not give any idea to other people, Except supermax, Opentel, and about installed your five dishes.
By the way I want to install a Pentium 4 system could u let me know it's quotation?
Microsoft Computer
Thanxxxxs
Welcome to RDI my Dear -------Mr. Specialist
Nice to meet you ,,,it seems you know me very well. It would be better if you could count the exact figure of my dishes,,, As long as concern Full X encryption,,,, Really I don’t know a little about these channels. I just conveyed an idea from a friend and as Khawaja 007 has confirmed so I agreed. It is fact I can’t afford subscription card as I’m not interested in 24 hrs "dilpeshaoari" Thanks for criticizing and making my correction. This is not the proper place to provide you quotation. You are welcomed to "Mic**** Computers" .You must be knowing of its location positively ,,,,, I hope.
Sultan Gondal ,,,Dear! your given link is not working ,,,will try in the morning time and then will give you progress,,,,
will convey your salam to Jogi jee.
@Sultan!link is not working with me,,,sorry
tech_man20
16-09-2004, 10:28
Plz continue your efforts as you were doing b4,,,,no file is being uploaded on yahoo group.Maintain it,,,plz.
@Techman!I have emailed you the new file ,,,,check your mailbox.
@Sultan!Plz let me know the exact link,,,,,Jogi naal naheen jana? :)
(Don't want to go with Jogi?)
Dear Masood Bhai,
Yaar,really a file is uploaded.Techman is not wrong.I'm providing you the link,plaese check. http://finance..groups.yahoo.com/group/joke_faisal/files
Plaese inform me if you may get success.Jogi da ki haal ae? 8)
Sultan Gondal.[/quote]
Dear Sultan Gondal,
YOu said you have sent a file to my email but i checked my email i have received nothing please try again.
Thanks for your cooperation
Dear Masood,
I downloaded the supermax software from the website WWW.newprog.net <http://WWW.newprog.net>
I extracted all the files from the ZIP Archive.
I also tried to upgrade my receiver according to what you said.
1. First i loaded the boot file boot make009 into the receiver and it was went well.
2. after that when i turned off the receiver and then on there was progEndOff on the front panel and the receiver couldn't establish a connection with the pc.
3. I turned off the receiver again and then turned it on
3. Now the receiver shows 009 on the front panel i want to download the second file momo.cas as you said, but the receiver is not establishing any connection.
Please solve my this problem otherwise the receiver will not take any software and it is now completely destroyed.
I am waiting for your reply
Dear Tech_man20,,,There are 5 files after unzipping,,,
1.BootMake 0029
2.s/w upgrade *.ppt
3.Boot_SSM 3.IS_Link 11b
5.MOMO 00.22.cas
1. First i loaded the boot file boot make009 into the receiver and it was went well.
You are talking about "bootmake009" file,,whereas this file is not including in the new version.If you are talking about 0029 file then read the above one my post and do accordingly.
wahidshah
16-09-2004, 22:59
Hello there,
The correct link is http://finance.groups.yahoo.com/group/joke_faisal/files.
But file is corrupt.
Regards[/url]
Hello there,
The correct link is http://finance.groups.yahoo.com/group/joke_faisal/files.
But file is corrupt.
Regards[/url]
By clicking the above link "NO DOCUMENTS FOUND" message appears.
sorry trials are being failed.
yar Everyone is giving a wrong address...
this is the correct link.....
http://finance.groups.yahoo.com/group/joke_faisal/files/
yar Everyone is giving a wrong address...
this is the correct link.....
http://finance.groups.yahoo.com/group/joke_faisal/files/
Thanks for giving proper link,,,,,Dear Farman
I've downloaded the file and there are only two files "desktop" and "folder"
not related to receiver,,,This link is also usefull but zee fix is not available.
http://groups.yahoo.com/group/hotbird233/files/
ALL RESPECETED FRIENDS
ALL RESPECTED FRIENDS AND ALL SUPERMAX CI 6000 PLUS USER
NEW SOFTWARE ZEE OK COMMING SOON (how how OR 2 DAYS)
JAVAID TARIQ KHAN
HELLO RESPECTED FRIENDS
SUPERMAX CI 6000 PLUS NEW ZEE OK SOFTWARE HERE.
ALL RESPECTED FRIENDS DOWNLAOD LINK SEE 9.00 PM 20/9/2004
OK
JAVAID TARIQ KHAN
_________________
ALL NEW ZEE SOFTWARE HERE. JOIN NOW
http://groups.yahoo.com/group/javaidvipsoftware
http://groups.yahoo.com/group/javaidvipsoftware2
One of my friend just called me on phone and told that after installing new zee ok,,,software,,his reciever is showing only digits"0000" on the screen.
He needs help from JavaidVip,,,,
But dear JAVAID Sahib there is no file link in you group page.
I got this message"You are not a moderator of the group javaidvipsoftware" Although I am member of this group.I could not fine files.
Masood what do you think about this?
mianamir
20-09-2004, 20:39
Dear Javaid
I download New Zee Ok S/W in My Receiver, But There is No change in My Receiver. Zee is Not Work.
Pleeeeeeeeeees Help. :( :( :( :(
@Orakzai,,,,,Javaid has uploaded "new" s/w in his group no 2,,,but after installing new s/w the result is not fruitful,,,,no positive response yet.
By unzipping new s/w there are three files
1.Bootmake_0029
2.FMB615b200904MO00.22
3.MOMO 00.25. cas
There is no bootloader in this ver.( IS_Link 11B)
Unless JavaidVip confirms ,,it is okay.
Don't install it in your receiver otherwise,,,,two witnesses are there ,,who are weeping after installing.
tech_man20
22-09-2004, 20:58
Dear Friends,
I tried to upgrade my receiver with new zee ok software but, when i loaded the boot make file 0029 and after turning the receiver off and then on there some strange digits on the front panel.
Now i am trying to load the main software "5512_VEx_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615c091804 MO00.25.hex"
the stb doesn't make any connection with the pc.
I also kept the channel up button pressed while turning off and on but still
0029 doesn't come on the front panel.
Please anyone help me out of this problem.
Thanks a lot in advance
Dear Friends,
I tried to upgrade my receiver with new zee ok software but, when i loaded the boot make file 0029 and after turning the receiver off and then on there some strange digits on the front panel.
Now i am trying to load the main software "5512_VEx_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615c091804 MO00.25.hex"
the stb doesn't make any connection with the pc.
I also kept the channel up button pressed while turning off and on but still
0029 doesn't come on the front panel.
Please anyone help me out of this problem.
Thanks a lot in advance
Dear Techman,,,,I have discovered the reason why few members are facing "8888" problem.JaviadVip's uploaded first files were fake,,,,it is 100% true,,,I comparison these files with new loaded files,,,I have both with me.The members who upgraded with earlier files,,,they are facing problem and they need to reprogram flesh memory.
I have upgraded my own receiver from www.newprog.net and that is working fine.I tried a lot to rectify "8888" effected receiver but all in vain.
Only reprogram may make effected receiver workable.
zafarjoia
23-09-2004, 12:22
this software is fake.
i download in a receiver. my receiver is dead now.
I request all friends donot donot donot download this.
thanks
this software is fake.
i download in a receiver. my receiver is dead now.
I request all friends donot donot donot download this.
thanks
If you read the above post carefully then you may change your comments,,,,,I have downloaded into my receiver successfully.(newprog.net)
I'm not a professional,,,simple home user.
Polsat AU has gone again. :(
Wait for a new s/w ,,,,,,, :!:
i try to upgrade my supermax but lost now on reciver only displaying 8888 what will i do please help me?
tech_man20
25-09-2004, 19:53
Dear Masood,
You said that Javaid VIP's uploaded files were fake.
Actually i don't know anything about his files because i didn't download the software from his group. I downloaded the new zee ok and polsate auto software from newprog.net.
It is the same software with which I upgraded many receivers and they are working well.
Now I will tell you my problem in detail.....
Before i upgraded my receiver its's software version was FMESMX 603d
Then i downloaded the Zee ok software from www.newprog.net.
the software is (5512_VEx_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615c091804 MO00.25.hex)
First I loaded the bootmake 0029 into the receiver after that i turned off the receiver and it showed 8888. then i kept the channel up button pressed and turned off and on the receiver many times but nothing happened.
The receivers that i upgraded with the previous Auto polsat software which was (5512_NO_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615b090604 MO00.22.hex) when i upgraded this new zee ok software in these receivers all these receivers are working well.
Now my question is why did that receiver get out of order.
Dear masood, I want to know if there are any ways that i can learn to reprogram the receiver's flash ROM my self.
Please provide me some help because i live in such an area where there isn't any facility.
Friends like you can help me.
Thanks a lot in reading this long message.
specialist
25-09-2004, 21:30
Dear Friends,
I tried to upgrade my receiver with new zee ok software but, when i loaded the boot make file 0029 and after turning the receiver off and then on there some strange digits on the front panel.
Now i am trying to load the main software "5512_VEx_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615c091804 MO00.25.hex"
the stb doesn't make any connection with the pc.
I also kept the channel up button pressed while turning off and on but still
0029 doesn't come on the front panel.
Please anyone help me out of this problem.
Thanks a lot in advance
Dear Techman,,,,I have discovered the reason why few members are facing "8888" problem.JaviadVip's uploaded first files were fake,,,,it is 100% true,,,I comparison these files with new loaded files,,,I have both with me.The members who upgraded with earlier files,,,they are facing problem and they need to reprogram flesh memory.
I have upgraded my own receiver from www.newprog.net and that is working fine.I tried a lot to rectify "8888" effected receiver but all in vain.
Only reprogram may make effected receiver workable.
hey masood,
How can u say that javaid's file was fake,U will not understand that.U r just giving blame to javaid.Members r installing new software at wrong way, where they just should press channel up button and then off and on reciever,they make a mistake there and flash is damaged by themself.Not bcoz of javiad's file.He is such a nice person and does help to anybody.
ok so don't give your fake comments here about files, just get a straight way and don't blame on people.
Best Regards
hey masood,
How can u say that javaid's file was fake,U will not understand that.U r just giving blame to javaid.Members r installing new software at wrong way, where they just should press channel up button and then off and on reciever,they make a mistake there and flash is damaged by themself.Not bcoz of javiad's file.He is such a nice person and does help to anybody.
ok so don't give your fake comments here about files, just get a straight way and don't blame on people.
Best Regards
Mr.Specialist,,,,I'm learner my friend and I never blame any one without any evidence or proof.I respect Javaidvip very much ,,,I asked him repeatedly that your uploaded files are tested,,,,but he never replied.Only once he replied,,,,but that was not reply of my question.Anyhow don't want to debate,,,,Why you hesitate to share your knowledge?if you have,,,,
Do you know the link from where I can get flash file for supermax?
By the way,,,,what is your real name?let me see your caliper.
The reprogramming facility of Flash is available at Lahore market.
I personally visited that spot ,they charge Rs.400 for reprogramming.
(Qadeer Electronics Hall Road).They don't replace the Flash only copy the flash file into chip.
hello friends
i have this supermax ci6000plus
now i have downloaded the Zee ok software from www.newprog.net.
but i cant connected to the receiver
i am using the cross cable
and it says STB version check
" Need loader version of STB Ver I.1.1" this is err i receive5r
Guys any idea whats wrong
My STb info
Product SUPER-CI 6000 PLUS
Soft : FM317b062002
Hard: A0-04
Data: SMME04041902ihdr
Loader ver: L.3.0
;plz help
john
hello friends
i have this supermax ci6000plus
now i have downloaded the Zee ok software from www.newprog.net.
but i cant connected to the receiver
i am using the cross cable
and it says STB version check
" Need loader version of STB Ver I.1.1" this is err i receive5r
Product SUPER-CI 6000 PLUS
Soft : FM317b062002
Hard: A0-04
Data: SMME04041902ihdr
Loader ver: L.3.0john
By unzipping the new s/w from the above website,,,,you will find a loader file (hidden) ,,,change its attribute and try again.B4 downloading new s/w check your cable continuety.
@Sultan Dear!I'm fine ,,thanks,,,,,yes polsat has changed its encryption,,,may be.AU is not being carried out.
thans for thr rply,
but i have tried and it gines me the same ERR.
and the cable is working i have checked it...i have used the same cable for the Digitalworld sft190M...and it worked
any idea plz...
wahidshah
01-10-2004, 08:36
Hello everyone,
I tried to dwonload the latest firmware to Supermax 6500CI. After successfull downloading now my reciever hangs at startup and show nothing on tv screen. What can be the possible problem with it and is there any way out of it?
Thanks
thans for thr rply,
but i have tried and it gines me the same ERR.
and the cable is working i have checked it...i have used the same cable for the Digitalworld sft190M...and it worked
any idea plz...
All procedure in detail is written in above posts,,,,plz get help and if the problem persists then describe your problem in detail...we will try to sort out.
S/W UPGRADE PROCEDURE OF SUPERMAX 6000 CI PLUS RECEIVER.
1. Connect STB and IS Link11B
2. Open Boot make File (Press Upgrade Software Button)
((5512)_SSM3_BootMake_0029.hex )
3. DownLoad Start
4. After All Data Transferred
Press OK On Your Computer Screen And Then Power OFF And ON Of Your
Receiver.
5. Front Panel Display EEnd,
Power OFF Your Receiver
6. Pressed Channel Up-Button▲ Of Your Receiver Front Panel (Hold On Channel Up ▲
Button And Then Power ON Of Your Receiver.
7. On Front Panel, Display “0029”
8. Open Main File (Press Download Program ‘Bulb’ Button)
(5512_NO_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615b090604 MO00.22.hex )
9. Download Start--------- When Complete Downloading On Front Panel Of Your
Receiver Display EEnd
10. After That Turn OFF & Then Turn ON Your Receiver, On Your Receiver Front Panel, Display (000 )
( Note:- If You Can’t Get ‘ 000 On Your Receiver front Panel, Then Press Power Button Of Your Receiver,You Will Get ‘ 000 OR 0000 On Your Receiver Front Panel )
11. Then Goto Cas Menu Press Download Cas key Select The File Momo.00.25.cas
SuperMax6000 CI Plus Firmware Loading Procedure
RDI Guys you have three files,
1-DTSLink4.0.exe Loader for software loading
2-SM_SP_6000CI_FMESMX603dCI10.07.hex Code Menu Software File
3-SMCI10.07.cas VIN Data File
Open DTSLink4.0.exe File and it will be like this
click on set port icon that is
Make sure RS232 is connected with Receiver(STB) and Receiver is in StandBy Mode
Click on Connection icon that is
click on upgrade software icon that is
at the roaming open your code menu file that is SM_SP_6000CI_FMESMX603dCI10.07.hex
software upgrading will start make sure that your receiver has latest SM_SP_6000CI_FMESMX501aCI10.05.hex file before loading code menu file
after successful upgrading there will be “END” on LCD of your Receiver .Power off and then Power on to restart the receiver
Repeat Connection step to connect the Receiver
Click on VIN and then open vin data then open SMCI10.07.cas file for VIN Data
Click on Download VIN Data icon that is
VIN Data downloading will start .
Your receiver is upgraded with Code Menu File ENJOY !!!!!!!!
AMJAD HUSSAIN amjadindus@hotmail.com
i still cant connected to the receiver
i am using the cross cable
and it says STB version check
" Need loader version of STB Ver I.1.1"
Why i heve this Error massage
i still cant connected to the receiver
i am using the cross cable
and it says STB version check
" Need loader version of STB Ver I.1.1"
Why i heve this Error massage
Beside upgrading ,,,try to downgrade with older ver. from
www.supermaxsat.com/software
and then try to upgrade with new ver.
wish you good luck.
i still cant connected to the receiver
i am using the cross cable
and it says STB version check
" Need loader version of STB Ver I.1.1"
Why i heve this Error massage
Any progress?
@Sultan,,,,Polsat AU file is not available at the moments,,,as I came to know ,will inform you within no time.We couldn't find any editor to edit the new frequencies ,,,,bad luck for us.
Jogi naal akaththay jawan gay :lol:
wahidshah
10-10-2004, 22:33
Dear Masood,
Will you please let us know how can we solve SuperMax 6000CI problem of 8888 on front panel? I think it can be done without going for reprograming one's falsh or replacing it. Waiting for your comments soon.
Thanks
Dear Masood,
Will you please let us know how can we solve SuperMax 6000CI problem of 8888 on front panel? I think it can be done without going for reprograming one's falsh or replacing it. Waiting for your comments soon.
Thanks
Wahid Shah! I was facing same problem "8888" on the front pannel of my receiver when I upgraded it.I adopted this option.
6. Pressed Channel Up-Button▲ Of Your Receiver Front Panel (Hold On Channel Up ▲
And the problem was solved,,,I found the 0029 on front pannel and then I installed the next *.hex file and it was upgraded successfully.
Basically your receiver have been hung up and you need to break its hanging state.I broke the hanging state of Fortecstar Platinum by keep on power on and off,,,during downloading and it is okay now.
Hi
Masood
I did the same but in vain.Still did not get 0029.Is it timing problem.
I tried many time with your told procedure but receiver dose not conect to PC showing disconnected in software.
hold on chanell up button on ur reciever front panel then reciever on.ur problem will be solve.
Afzalnajaf
11-10-2004, 13:29
I have same 8888 Problem and did not solve with the above given solution.
Any boddy have other idea, please help me.
I have same 8888 Problem and did not solve with the above given solution.
Any boddy have other idea, please help me.
If you have upgraded with incomplete s/w then there is no solution except reprogramming.JaviadVip's first downloaded files were incomplete and those files created many receivers useless.sorry to say that you have to reprogram...it is the only chance to make your receiver useful.
I dont know whether my sofware was complete or not but I have not downloaded it from Javidvip group.I succesfully download boot file to my receiver first time,then I hold on Channel up button many time but could not succeed to download second file.It means my receiver is dead.
New s/w Zee update is available at www.newprog.net
I have just downloaded and haven't checked yet.
waheedkhan
25-11-2004, 04:11
dear masood,
this software has been published one month ago but it can not be
downloaded and if u have downloaded it plz confirm it that it can upgrade
the stb or zee or it is only a fake.
i have downloaded the software and also transfered it to the stb after the
step of 0029 but when it was completed it showed 0029 again and it was
unchangable not with the remote controller nor with the power off switch.
regards
waheed marwat.
dear masood,
this software has been published one month ago but it can not be
downloaded and if u have downloaded it plz confirm it that it can upgrade
the stb or zee or it is only a fake.
i have downloaded the software and also transfered it to the stb after the
step of 0029 but when it was completed it showed 0029 again and it was
unchangable not with the remote controller nor with the power off switch.
regards
waheed marwat.
This is latest s/w and I checked it after installation ,,it is not working with Zee but Polsat AU is working 100%
Its installation is much easy than earlier.
We are thankful to Mr.Fattah for providing a nice link for Super-CI 6000 Plus Receiver.(Here is his real post)
hi my friend bownload this software for supermax6000ci and9000ci and9950ci
it is 100% test and ok for tps and polsat aouto update
master code 1234
[url]http://www.digium.net/
then click dosya mekezi
then click next& next star
then download this file(NextYE2001DACIPLUS_FMB615c)
its it is 100% test and ok supermax6000ci and9000ci and9950ci
enjoy
I already downloaded this new s/w and is working very fine.
Asiasat 3S is missing from CHD file.You will have to add the frequencies manually.
Hi Dear Masood Bhai,A.A
How are you?I have downloaded the sw for 6000CI Plus and it works polsat auto fine.But I want to get now a new sw for TPS.Please help.
Thank you in advance.
Sultan
thanks Mr.Sultan gondal ,,,,nice to see you.
Plz find the s/w from the link given above or you may download it from
www.satlover.wz.cz/forum
if you get any problem ,,,,we may discuss here.
farrukhayub
05-12-2004, 07:22
hello
all respected members plz type the complete procedure for upgrading the nextstar software in 6000ci plus because i damaged my 6000ci flash one time and does not want to damage it again and one more thing is that there is no file in digium.net by the name of nextyeah2001dacifmb615c....
kindly answer
ALLAH HAFIZ
pls download 2500dpci intead of 2001 daci.
it is full compatible to supermax 6000ci plus.and download boot make file .its version of 30.first download boot file then srb off.then keep hold chanel up key in front of ur supermax and reciever on.then panell show 0030,then download 2500 dpci file using bulb icon on downloader.thanx after download momo key file.
pls download these all software from here,
:arrow: http://www.freewebs.com/haq123
haq
satlover
05-12-2004, 15:36
pls download 2500dpci intead of 2001 daci.
it is full compatible to supermax 6000ci plus.and download boot make file .its version of 30.first download boot file then srb off.then keep hold chanel up key in front of ur supermax and reciever on.then panell show 0030,then download 2500 dpci file using bulb icon on downloader.thanx after download momo key file.
pls download these all software from here,
:arrow: http://www.freewebs.com/haq123
haq
What is the code to make factory default ,,,Dear Haq Nawaz?
dear go to password ,if it is off then on and set ur new password as u like.
haq
The password to enable CAS menu is 1234 but to make the factory default again ,,,firstly it was 0000 but now it is not working.
any body knows?
satlover
07-12-2004, 04:45
The password to enable CAS menu is 1234 but to make the factory default again ,,,firstly it was 0000 but now it is not working.
any body knows?
You want to know the pw for Next Receiver?
The password to enable CAS menu is 1234 but to make the factory default again ,,,firstly it was 0000 but now it is not working.
any body knows?
You want to know the pw for Next Receiver?
yes ,,I upgraded my receiver with this software.Next or Next ,,something.
Plz help me
You may replace the older version with Loader
SuperLINK 2.0 :)
khawaja007
12-12-2004, 08:05
Hello,
CAS CODE IS 1234
DEFAULT PASSWORD IS 8503
satlover
16-12-2004, 14:12
Hello,
CAS CODE IS 1234
DEFAULT PASSWORD IS 8503
Thanks Dear khawaja ,,is it confirmed?
TPS gone again with Super-CI 6000 Plus :cry:
Dear Members
Can some One Provide Me the New Working Software for TPS and Polsat
for My Supermax 6000ci Plus iam Waiting
Regards Soon reponse will be apperciateable
Dear Members
Can some One Provide Me the New Working Software for TPS and Polsat
for My Supermax 6000ci Plus iam Waiting
Regards Soon reponse will be apperciateable
Dear Rocky,,as I find the new s/w for Supermax ,,,it will be here without any delay,,,plz wait for few days.
Find the new s/w for Super-CI 6000 PLUS tested 100% okay Polsat AU and TPS fixed.
here,
http://mian.250free.com
pass=123456
logname=haq
thanx[/quote]
_________________
be a helping personality
http://freewebs.com/haq123
Courtsy Mian haq Nawaz from Hafiz Abad.
you may download the new s/w from www.digium.net as well.
mr masood sahib pls dont mension about any member place.pls delete it.
haq
farrukhayub
27-12-2004, 12:52
dear memebers
plz tell me what is the procedure to download this new
software.before this i download the next star soft of 2500dapci but now u
r telling 2000 dapci. i have downloaded the software with old loader 2.0
now what should i do now because i have the origional software of
supremax 615d and with this loader i try to upgrade but after upgaring
my receiver shows 0029 and cant take the 616a of next .i reload the old
software of supermax 615c now kindly tell me whether i will give the boot
file 0029 first and then 616a or direct give the file 616a on 615c of
supermax origional.and i dont want to damage my flash again .so kindly
tell the complete procedure for me and all other users.
thanks in advance
ALLAH HAFIZ
satlover
30-12-2004, 04:39
dear memebers
plz tell me what is the procedure to download this new
software.before this i download the next star soft of 2500dapci but now u
r telling 2000 dapci. i have downloaded the software with old loader 2.0
now what should i do now because i have the origional software of
supremax 615d and with this loader i try to upgrade but after upgaring
my receiver shows 0029 and cant take the 616a of next .i reload the old
software of supermax 615c now kindly tell me whether i will give the boot
file 0029 first and then 616a or direct give the file 616a on 615c of
supermax origional.and i dont want to damage my flash again .so kindly
tell the complete procedure for me and all other users.
thanks in .
ALLAH HAFIZ Dear Farrukh ,,,after downloading the older ver. SuperLINK 2.0 upgrade your receiver by giving any one of above files ,,,,thats all.don't worry I upgraded my receiver in same way
dear memebers
plz tell me what is the procedure to download this new oftware.
tell the complete procedure for me and all other users.
thanks in advance
ALLAH HAFIZDouble click on SuperLINK 2.0 file ,,it will ask to configure com 1 or com 2 by "connecting",,,You just click on "cancel" and the loader window will be opened. Click on the button "upgrade software" and then by selecting new file ,it will start downloading.After installation completed switch off the STB ..There is nothing like 0029 or 0030 in between upgradation.
New supermax original s/w has realeased ,,,download from
http://www.newprog.net/
satlover
31-12-2004, 03:12
New supermax original s/w has realeased ,,,download from
http://www.newprog.net/
Upgrading procedure is same as we have been doing b4.Loader is already given in new s/w.
New supermax original s/w has realeased ,,,download from
http://www.newprog.net/
Upgrading procedure is same as we have been doing b4.Loader is already given in new s/w.
fully tested found working fine with TPS and Polsat AU :D
Brother Massoud
Can you help me to download the new software from newprog.net
tell me which loader from these two i have
superlink40, Is Link11c, kindly advoice me
iam waiting with full prsedure, coz and downloading software iam new
satlover
31-12-2004, 10:17
Brother Massoud
Can you help me to download the new software from newprog.net
tell me which loader from these two i have
superlink40, Is Link11c, kindly advoice me
iam waiting with full prsedure, coz and downloading software iam newYour are not new one Rocky!
click on IS_Link 11B and select 0029 hex file and start upgrading.After installing that file switch off the STB and press the UP button and switch on the STB then select the next file thru "bulb" option and then you may download cas file at the end.
By the way ,,all procedure is already written if you like to go back one page.
The s/w from www.digium.net is improved than from www.newprog.net
There are few new features in Next s/w.
Only one drawback is difficiency of Satellites like Asiasat 3S or Express 6A etc.
wahidshah
31-12-2004, 21:40
Masood Bhai please let us how Next software is better than official Supermax 6000CI software. Please mention in detail. Thanks
::Happy New Year To All of You::
Masood Bhai please let us how Next software is better than official Supermax 6000CI software. Please mention in detail. Thanks
::Happy New Year To All of You::
The new features I found are
1.there is an option to keep off the "still" picture when we change the channel.
2.Deletion option is more effective.
3.Picture quality and sound quality both are better.
We have to feed new satellite manually in Next s/w.,,otherwise it is much better.
wahidshah
01-01-2005, 21:41
Thanks Masood for the information. Can you please give the software version along with its loader and procedure to uplaod it. One thing more, can I upload official software again in case if I am not satisfied with Next software?
Thanks
Wahid
Thanks Masood for the information. Can you please give the software version along with its loader and procedure to uplaod it. One thing more, can I upload official software again in case if I am not satisfied with Next software?
Thanks
WahidYes ,,why not ,,you ,may download any other s/w after installing turkish s/w (Next) and that s/w is uploaded link is given in this thread by Haq.you should follow the instructions. :idea:
hi
i have recently bought supermax ci6000 plus with Next s/w installed. now i want to upgrade it. can i upgrade it with supermax own software. where can i get Next software. what the method of upgrading.
thanx
hi
i have recently bought supermax ci6000 plus with Next s/w installed. now i want to upgrade it. can i upgrade it with supermax own software. where can i get Next software. what the method of upgrading.
thanx
Dear Tiptop,,,your receiver is already installed with Next s/w then why do you need to serach for Next s/w?
Don't upgrade it with its own s/w ,,,you can read all instructions in above posts.Plz ask the questions in this thread beside Pms....thanks
dear masood,
i just want to know how to upgrade it. can u plz tell me where can i get the Nest s/w. also tell me how can i upgrade my reciever with Next s/w. plz tell me in detail step wise.
thanx
can anyone help me plz, how to install Next s/w to supermax ci 600plus .plz tell me detail stup wise.
thanx alot
can anyone help me plz, how to install Next s/w to supermax ci 600plus .plz tell me detail stup wise.
thanx alot
Tip Top ,,why can't you read the procedure in above posts ,,do you want ,I should repeat the same posts as you are doing?
:idea: Plz read in above posts and you will get your answer,,if you feel any difficulty then tell us ,,we are here to help you ,,I have all s/w with me I may upload for you once again.
Polsat AU is no more working with NEXT s/w :cry: ,,may be working with its own s/w from www.newprog.net :idea:
Any other evidence ?
satlover
19-01-2005, 07:14
same with me.
Please help:
when i update the new software from Haq website i lost asiasat3 and many more sat i have in my sat list till LM 75'E
can some one help me to take the defulte vlaue passward and to bring the asiasat 3
is there any new about Seca2 software for my supermax 6000ci +
Please help:
when i update the new software from Haq website i lost asiasat3 and many more sat i have in my sat list till LM 75'E
can some one help me to take the defulte vlaue passward and to bring the asiasat 3 is there any new about Seca2 software for my supermax 6000ci +
You may add tps manually in any given SATs by renaming with required sat's name.
satlover
28-01-2005, 05:11
*. chd file can be edited ? any one can help me please
Here are list of receivers taht use same s/w as supermax ci 6ooo plus.
1 . Next plus series with fmb/fme hardware. Marketed in Turkey
2. Sunny AT 8010 DACI series. Marketed in Turkey. Same shape of stb as supermax only with sunny tag is on stb.
3. Technomate TM 5500 CI Plus Marketed in England website www.technomate.com emulator s/ws on www.sataid.com
But all the above companies have not released s/w for these receivers later than 616a version.
As I think all the companies have left support for these models. All supermax users should mail to supermax for continuing support because this model is marketed in Pakistan only and thousands of users are in Pakistan of this costly receiver. Plz mail to supermax (ecomax99@emirates.net.ae)
These all info are taken by the link provided in Pakistan forum for all receiver sites if any person search more on this site some more equivalents can be found.
Waiting for the comments of other sat friends
Here are list of receivers taht use same s/w as supermax ci 6ooo plus.
1 . Next plus series with fmb/fme hardware. Marketed in Turkey
2. Sunny AT 8010 DACI series. Marketed in Turkey. Same shape of stb as supermax only with sunny tag is on stb.
3. Technomate TM 5500 CI Plus Marketed in England website www.technomate.com emulator s/ws on www.sataid.com
But all the above companies have not released s/w for these receivers later than 616a version.
As I think all the companies have left support for these models. All supermax users should mail to supermax for continuing support because this model is marketed in Pakistan only and thousands of users are in Pakistan of this costly receiver. Plz mail to supermax (ecomax99@emirates.net.ae)
These all info are taken by the link provided in Pakistan forum for all receiver sites if any person search more on this site some more equivalents can be found.
Waiting for the comments of other sat friends
well well mr masood vary good and nice posting i like that i also useing supermax 6000ci plus same s/w next installed
Rizwan
I'M needed new software for SuperMax 6500CI
info instruksion
please help..
I'M needed new software for SuperMax 6500CI
info instruksion
please help..
www.newprog.net is the site from where you can get the latest s/w for Supermax series. :idea:
I www.newprog.net have downloaded the new software for 6500CI well this erroneous. Then I have downloaded 2525CI it too have not given results. The matter is that here flash.out a file 1мб. At me in a receiver 2мб.
HELLO FRINEDS
SUPERMAX CI 6000 PLUS NEW SOFTWARE 19 FEB.2005 COME
www.newprog.net BUT BIG MISTAKE IN BOOT FILE WRONG
NEW SOFTWARE HAVE THIS BOOT FILE
5512_ISx_VEx_CH3500_SMME_CI_BootMake_0029.hex
DO NOT UPGRADE THIS BOOT FILE U UPGRADE BOOT OLD
I MEANS USE THIS BOOT FILE
(5512)_SSM3_BootMake_0029.hex HAVE 616a (29 DEC.2004 )
SPECIAL NOTE :
IF U R RECEIVER ALRADY SUPERMAX CI 6000 PLUS 29 DEC.2004 SOFTWARE
SO NO NEED FOR BOOT FILE ONLY UPGRADE MAIN FILE
IF U R RECEIVER HAVE NEXTSTAR SOFTWARE SO NEED BOOT FILE
OK
BEST WISHES SUPERMAX CI 6000 PLUS USER
_________________
Pakistan Fourm Team
HelpLine +92-0333-6448251
E-Mail: javaidvip@hotmail.com
http://pakistan-forum.tk
http://al7bar-soft.com/phpBB2/index.php
http://groups.yahoo.com/group/javaidvipsoftware
waheedkhan
22-02-2005, 04:42
hi forum,
dear friends and experts i have sm 6000ci plus. it has stopped fuctioning
due to its prcessor's failure. the technicians says, u have to change the
entire PCB. and it has the cost of round about Rs.4500. so now what
should i do, whether it is repareble without changing the PCB. or not.
i will wait for ur reply.
thanx.
waheed.
hi forum,
dear friends and experts i have sm 6000ci plus. it has stopped fuctioning
due to its prcessor's failure. the technicians says, u have to change the
entire PCB. and it has the cost of round about Rs.4500. so now what
should i do, whether it is repareble without changing the PCB. or not.
i will wait for ur reply. thanx.
waheed.
How it happend? plz tell us the detail and I don't think PCB is so costly :idea:
Gulabi233
22-02-2005, 17:47
thanx for the reply,
well dear i do'nt know how it happened but oneday when i download a software i.e 615d. and it was damaged i was thinking of its flash but it was not the problem of its falsh(according to the technecian) he said that ur processor is out of order. he siad that u have to change the pcb board coz its processor cannot be replaced, then we cotact to a tech in lahore for the pcb price and he told us that its price is about 4500. so this is problem.
further i do'nt know whether it is technician's fault to damage it or the new software.
so now what should i do?
thanx.
waheed
Dear Masood Bhai,
Next has released a new sw version 616c istead of 616b and I have tried many time to upgrade my stb but it shows link faliure.I have upgraded my stb with 616b.What is happened?Stb is working fine but problem is that stb does not complete the connection.
Please send me old loader version 2.0 etc.As you know that who I can get rid of this problem.Please give me some directions.
Thanks & regards,
Sultan Gondal
thanx for the reply,
well dear i do'nt know how it happened but oneday when i download a software i.e 615d. and it was damaged i was thinking of its flash but it was not the problem of its falsh(according to the technecian) he said that ur processor is out of order. he siad that u have to change the pcb board coz its processor cannot be replaced, then we cotact to a tech in lahore for the pcb price and he told us that its price is about 4500. so this is problem.
further i do'nt know whether it is technician's fault to damage it or the new software.
so now what should i do?
thanx.
waheedYou should show your STB to different technician in Lahore i,e Digital all world electronics or Kabeer Electronics or Pioneer,,,their shops are located side by side.
Plz don't depend on one technician :idea:
@Dear Sultan! I upgraded my STB from
http://www.nebutv.com/fme%20ve%20fmb%20d%F6n%FC%FE%FCmleri(18%20%DEUBAT% 202005).asp
and it is working fine with Cyfra+ and Polsat AU
waheedkhan
23-02-2005, 20:05
dear masood thanx for the reply,
sir, i live in d i khan and here in d i khan they hardly two or three so why i m worried about it.
thanx
waheed
Dear Masood Sb,
I have the latest sw ver.616c released by Next 0n 20.2.05 and I want to upgrade my stb but problem is that I was upgraded my receiver with the first release 616b released on 17.2.05 and I think that there was a bug in that version.And due to that my stb not shows link with superlink IS 1.1c loader/IS 1.1B and shows error message"software upgrade error".I have the RS232 cableand it is working fine with another 6000ci plus with original sw.If you have some knowledge about that problem,please help me.I think that if I try that version through Superlink2.0(old loader)perhaps I may get sucess.Please send the old loader version.
Thanks,
Sultan Gondal
sultangondal@hotmail.comI have upgraded with original s/w from newprog.net now and have not checked its performance.You may download your required SuprLINK2 by clicking it (http://primeevil.plt-hosting.com/showthread.php?p=68167#post68167)
@Waheed ,,,sorry dear ! I can't help you.
I have checked the orignal ver. and found not satisfactory comparatively,,,In turkish s/w there are new features for example by pressing yellow button we may edit new keys,,,I upgraded it with Turkish s/w by the help of IS_Link 1.1B by pressing "bulb" option ,,,While upgrading I pushed the "upward" button just after switching on the STB 0030 appeared and then I downloaded the Turkish s/w into my STB successfully.If you need FMB_Bootmaker (0030) I can upload.
I recommend the Turkish s/w for this STB,,,only there is one defficiency of SATs and we may insert manually
Dear Masood Sb,
I tried from primeevil forum to get link 2.0 but failed bcoz nothing is there.Please help me.Some day ago the old link version was in sattalk forum but there is nothing now.
Please warn to all friends that they should not upgrade thier stb's with the next's sw ver.616b because this version has a bug.If anbody upgrade with this sw,he will face the problem like me.
Thanks,
Sultan GondalThe file is available Here (http://primeevil.plt-hosting.com/showthread.php?t=9614&page=3)
Dear sultan !I have checked by myself it is working fine.
Every one would have read your message and they won't do the mistake.
If you can't get the file plz tell me I will send you thru email or you are welcome to visit me :)
after upgrading my receiver with next 616c software, teletext service is gone ..
farrukhayub
26-02-2005, 04:35
DEAR MEMBERS SALAM
DONT WORRY FOR THE S/W VER 616B ALL UR
STBS ARE OK. IF URS STBS ARE NOT CONNECTING TO 1.11B SO DO
THIS PROCEDURE AND UPGRADE IT WITH 616C.THE PROCEDURE IS .
SIMPLE JUST OF UR RECEIVERS AND SWITH ON HOLDING THE CHANNEL
UP BUTTON IT WILL SHOW 0030 AND THEN BY PRESSING THE BULB
BUTTON GIVE IT 5512 616C MAIN FILE
AND CHECK UR STB CONNECTIVITY
IT WILL BE OK
THANKS
after upgrading my receiver with next 616c software, teletext service is gone ..Game (help) has gone as well :cry:
@Sultan! did you receive the s/w sent by me?
Dear Members;
Can you provide me the new tps update for my supermax 6000ci plus
Regards
hello everyone out there is tps really working on supermax or no cuz everyone is saying but no one is giving me the software for tps.
ur opinion plz.
hello everyone out there is tps really working on supermax or no cuz everyone is saying but no one is giving me the software for tps.
ur opinion plz.Baba Jee,,,click on www.digium.net
Dosya Merkezi,,,,Next Plus serisi and then choose 2500DPCI (tps-un official)to download.I have checked by myself ,,working very fine with TPS,Polsat AU and Cyfra+ :wink:
TipTop ! Rocky ! are you happy now by Supermax?
satlover
01-03-2005, 05:13
download by clicking it
http://satlover.wz.cz/dload.php?action=category&cat_id=6
thanx to all my respected friends ive tried alot to connect my receiver with 1.1c 1.1b & 2.0 link loader but my receiver is giving the error of serial cable but cable is 100% ok can anyone guide if someone have faced this problem i will be grateful to u. offcourse im talking abt supermax 6000ci plus.
ya i m happy with supermax but the prob is that i have downloaeded the software but it doesnt work with me, tps is not opened. i dont know wats the prob. i have just upgraded the reciever with new software but nothing happened. can anyone help me plz
ya i m happy with supermax but the prob is that i have downloaeded the software but it doesnt work with me, tps is not opened. i dont know wats the prob. i have just upgraded the reciever with new software but nothing happened. can anyone help me plzDid you autoupdate Polsat by pressing red button?
yes Cyfra+ is not working but seca 2 is still working Cartoon Network on 10949 13*e :wink:
Did you check it by entering this key
0D: BB F5 3D 83 0E EC A7 F8 Dear Sultan?
hello
i upgrade my supermax ft 9900 plus with superlink2 application now my reciver all digit on front panel on and no remotecontrol work when i on off switch reciver then 9333 dight on front pannel plz tell me what is this and what can i dooo
thanksSorry wisdompk!I can't help you as I have not seen this STB in my life,,I will ask some one else to help you.
can anyone give me the latest key for Multivision. plzzzz chek it out in ur reicevver and paste it here so that i may enter it. thanx
satlover
02-03-2005, 15:55
can anyone give me the latest key for Multivision. plzzzz chek it out in ur reicevver and paste it here so that i may enter it. thanx
This time TPS use 0B key in my receiver
0B : 4F C0 61 86 E4 8C 35 7C
but TPS not working with this key without update of your STB. its better for you that find latest software of you STB
can anyone give me the latest key for Multivision. plzzzz chek it out in ur reicevver and paste it here so that i may enter it. thanxAfter new upgradation ,,No need to enter any key.TPS is working 100% :)
hello
i upgrade my supermax ft 9900 plus with superlink2 application now my reciver after upgrade software when again on reciver the front panel not working proper and standby or channels button not working if i on off swtich the panell number change no any signla or display message appear and rs232 cable not conacted plz help me what can i do
Thanks :? :?Your stb's flash needs to be re-programed with the help of programer :idea:
hello rdi friends
can any one help me to reprogramme my STB flash (Supermax 900 ft)plz help me how i reporame my reciver STB flashyou can't do that without a programmer which cost is more than Rs.50,000.00.
It is better you get service from local market or Hall Road Lahore.
The new version 617a of Super CI-6000 Plus is supporting teleltext :)
You may download that s/w by clickinghere (http://satlover.wz.cz/viewtopic.php?t=159&sid=5bf9c82ef0c4abbc182d068c8b0bab2f)
s**a2 emu for NEXT 2500 DCIP Plus
--------------------------------------------------------------------------------
Well, if your Supermax CI 6000 Plus is converted to NEXT YE-2500 DCIP PLUS, with new s/w
NO TELETEXT....
POLSAT AU OK
TV CABO AU OK
D+ S**a2 ASTRA OK
CYFRA S*CA2 HOTBIRD OK
HOW TO...
1 - RUN IS LINK 1.1C User
2 - make sure that your receiver is standby
3 - connect your receiver with PC.
4 - click connect button and see your STB information on buttom of IS LINK 1.1C
5 - select "UPLOAD CHD DATA" for the save your receiver setting data...
WARNING !!!
AFTER UPLOAD CHD DATA do not close IS LINK 1.1C
5 - Switch your receiver "OFF" with "PLUG"....Hold "channel up button" while switch ON with plug untill appear "0030" or "0300" on your receiver display...
6 - Click "LAMP" icon and browse "FMB616c" file..
7 - wait untill appear "END" on your receiver display..
8 - click "download cas key" icon and browse "MOMO_0032" for update keys...
1. Turn ON your Receiver on standby.
2. Connect loader IS_Link11C_User.
3. Press Upgrade Software Button & Select Boot make File ((5512)_SSM3_BootMake_0030.hex).
4. DownLoad Start.
5. After All Data Transfer Press OK On Your Computer Screen And close IS_Link11C_User.
6. Front Panel Display End, Power OFF take 20sec then ON from back of your Receiver.
7. Front Panel Display EEnd.
8. Press and hold Channel Up-Button Of Your Receiver then Power Off take 20sec then ON from back Of Your Receiver.
9. Front Panel should Display 0030.
10.click loader program Link11C.
11.Press Download Program ‘light Bulb’ Button, select Main File (5512_VEx_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615c091804 MO00.32.hex).
12.Download Start--------- When Complete Downloading, On Front Panel Of Your Receiver Display EEnd.
13.After That Turn OFF & Then Turn ON from back of Your Receiver, On Your Receiver Front Panel, Display ( 000 ).
(Note:- If You Can’t Get ‘ 000 On Your Receiver front Panel, Then Press Power Button (stand by) Of Your Receiver,You Will Get ‘ 000 OR 0000 On Your Receiver Front Panel).
14.Then Goto Cas Menu Press Download Cas key Select The File Momo.00.25.cas.there is a new one in the posts
15.Your receiver show 8888 for a moment and will OFF and then will be ON and will show on front pannel 0000.
16.Press OK Completed New Software Upgrade
with this procedure can we see cyfra+ on supermax 6000ci+ did anyone done this long long long procces it totally goes up from my head :roll:
with this procedure can we see cyfra+ on supermax 6000ci+ did anyone done this long long long procces it totally goes up from my head :roll:
cyfra+ is not working at the moments ,,,these all (cutting) will help needy members :wink:
hi dear sir masood
you always done good work you told detail supermax ci 6000plus upgarde.thanx a lot but sir kindly help me and other rdi friends or members pls tell us supermax ci 6000 plus same upgarde file not available and different webside which side is good._ttp://www.digium.net/ is available 617 file all but file 616 not available sir my request is pls help me thanx alot
my best wish 4 u
thank u very very much
my email.kingaamir2003@hotmail.com
hi dear sir masood
you always done good work you told detail supermax ci 6000plus upgarde.thanx a lot but sir kindly help me and other rdi friends or members pls tell us supermax ci 6000 plus same upgarde file not available and different webside which side is good._ttp://www.digium.net/ is available 617 file all but file 616 not available sir my request is pls help me thanx alot
my best wish 4 u
thank u very very much
my email.kingaamir2003@hotmail.com
You may download the latest s/w for supermax from here Dear Aamir
http://satlover.wz.cz/dload.php?action=category&cat_id=6
hi dear Respect sir masood
i want to these file which is not available and error 404 webside pls helpme
files
1."UPLOAD CHD DATA" ... file
2.((5512)_SSM3_BootMake_0030.hex
3.FMB616c
4.cas key MOMO_0032
5.5512_VEx_Boot_SSM3_SUPER-CI 6000 PLUS_FMB615c091804
(MO00.32.hex).
6.File Momo.00.25.cas
dear sir i want to see my receiver.
POLSAT AU OK
TV CABO AU OK
D+ S**a2 ASTRA OK
CYFRA S*CA2 HOTBIRD OK
my receiver stb information
product:supermax-ci 6000plus
software version:fmb 615 co91804 moon.25
hardware version:Ao-o4
date version:ssm 304081104 iidt
loder version:1.1.1b (df)
comamy:supermax
dear brother and sir
pls help me
pls take a few time answare me detail and pls give me these file
i have no word for thanx
thanx very very very very very much much
Polsat AU is no more working with this stb,,,wait for new s/w :cry:
@Aamir plz tell me your problem thru PM.Sorry I can't understand what do you want
hi dear sir masood
thanx a lot your answer.you such a good person and coperate men.
i want this file (5512)_SSM3_BootMake_0030.supermax ci 6000 plu
pls help me
once again thnax a lot
my best wishes 4 u
take care
zahid235
15-03-2005, 04:07
All Dear viewers.
I have a problem when i download boot file[0030] my receiver supermax6000ci plus after its success then this one file name:5512_VEx_Boot_YSM3_YE-2000 CI PLUS_FMB617a030705 MO00.32.hex
downloading error massage display front penal of receiver like 33err.
why its create problem?otherwise old file fmb616b load succesly and receiver work properly...........I hope dear viewers will help me about its problem i want file (5512)_SSM3_BootMake_0030.supermax 6000ci plus
2]cas key MOMO_0032 [3]completly CHD DATA
with best wishes
zahid masood khan ghilzai
Email:zahidelectr@yahoo.com
\\zahidelectr@hotmail.com
zahid235
15-03-2005, 07:00
Hello Masood!
I hope you will be in the best of good health
My problem is about supermax 6000ci plus when i download file FMB_YSM3_BootMake_0030.hex in my receiver after it success
my receiver front show 0029 not display 0030.......why did not?
FMB_YSM3_BootMake_0030 this one file not suiteable
how can be i get (5512)_SSM3_BootMake_0030? Please help me
zahid masood ghilzai
This is the file
http://free.7host06.com/pakistanforum/supermax%20ci%206000%20plus.JPG
All Dear viewers.
I have a problem when i download boot file[0030] my receiver supermax6000ci plus after its success then this one file name:5512_VEx_Boot_YSM3_YE-2000 CI PLUS_FMB617a030705 MO00.32.hex
downloading error massage display front penal of receiver like 33err.
why its create problem?otherwise old file fmb616b load succesly and receiver work properly...........I hope dear viewers will help me about its problem i want file (5512)_SSM3_BootMake_0030.supermax 6000ci plus
2]cas key MOMO_0032 [3]completly CHD DATA
with best wishes
zahid masood khan ghilzai
Email:zahidelectr@yahoo.com
\\zahidelectr@hotmail.comTry this if you get E330 (retune your tv to channel 38)this is because some of you may be using an rf lead and not a scart plug.Now you will see a user page(do what you have to do and then press exit)Now go to the sat setup and set sats in order you use them.Then the final stage is to search for the channels(once you have found and stored the channels the E330 dissapears and 0000 is displayed on the front panel).Then its just the same procedure as the supermax patch...........happy hunting and hope it helps
zahid235
16-03-2005, 18:37
Dear masood!
Thank you very much help for supermax6000ci plus
now receiver upgrade fmb517a file this one file have missing satellite
and low memory because i have save chanal data and satellites it load success but after missing why it is?
Dear masood!
Thank you very much help for supermax6000ci plus
now receiver upgrade fmb517a file this one file have missing satellite
and low memory because i have save chanal data and satellites it load success but after missing why it is?Are you talking about ver. 617a? Dont rush while typing ,,you should read b4 sending your post.
You will have to add our receivable SATs manualy,,I'm working in channel data file and will get conclusion very soon.Due to shortage of time it is still pending.
you will have to survive at the moments :D
zahid235
17-03-2005, 05:31
Dear Masood!
Thank you for indecate my mistake[FMB617a toFMB517a version]Your working in channel data file its good news... have you a HexDataEditor orHexCmp? HexCmp is a program, which combines together the features of a binary file comparison application and a convenient hex editor. The program will help you to compare files in binary format, at the same time serving as a hex editor that will edit and modify your files. Comparison is made on-the-fly, while scrolling down the files. Enhanced with features like color highlighting; synchronous scrolling; an Info panel, which shows the file information in different formats and more, this program will most definitely become an asset for both home users and companies.If you have another software binary reader please tell me.......HexDataEdit is a tool to view and edit binary data file. Using this program, you can view and edit binary data in every type such as Byte, Integer, Float, String ??
What can you use HexDataEdit for?
If you want to view and edit an unknown file, using this program can let you quickly find an unknown file's structure, and then you can view or edit it.
If you are a programmer, you can use it to view or edit your output data. You can also use it to view other program's data.
If you don't like viewing or editing binary file in hex, you can use it.
If you don?t know much about Hex, this program can help you.
Using this program, you can extract some data from a file to another program or you can print the data out.Thanks agin.
With Best Wishes
Zahid Masood Khan
Email:zahidelectr@yahoo.com
zahidelectr@hotmail.com
I did many experiments to update with all "our" required SATs,,a final updated file is in progress.
May be ,,,on sunday I will upload that file with all procedures.
Dear Zahid Mian! I'm not a programmer,,thanks for providing nice information.TPS gone again,,,I thought may be during experiments I loosed TPS :D
click here to download new updated channel data file
http://satlover.wz.cz/viewtopic.php?p=550
wahidshah
19-03-2005, 21:46
Hello everyone,
Those who need complete channel data for Supermax 6000CI plus next version software can get it from here http://www.satlover.wz.cz/viewtopic.php?t=218
Regards
Wahid
Hello everyone,
Those who need complete channel data for Supermax 6000CI plus next version software can get it from here _ttp://www.satlover.wz.cz/viewtopic.php?t=218
Regards
WahidWahid shah !I downloaded your file "download" ,,what is its extension?
How I can open it in IS-Link 1.1B or 1.1C?
plz clarify.
wahidshah
20-03-2005, 16:59
@ Masood,
Well you can open it with Link 1.1B or 1.1C. Its extension is chd. I hope it works with you this time.
Wahid
zahid235
20-03-2005, 19:45
Dear Wahid Shah!
Congratulation on your complete channel data for Supermax 6000CI plus next version software. But it is not complete list of satellite like as old version
thank you very much good try
zahid masood khan
wahidshah
20-03-2005, 21:37
@ zahid235
Thanks bro. Yeah you are right its not complete as of Supermax orignal software. But let me tell you that a compact channel data is in progress and will be uploaded soon.
Regards
Wahid
@ Masood,
Well you can open it with Link 1.1B or 1.1C. Its extension is chd. I hope it works with you this time.
WahidDear Wahid ! sorry to say ,,still I can't open your file in SAT Link 1.1b or c ,,plz upload again in zip format..it was not in zip format when I downloaded this file,,thanks in advance.
This post is from Javaidvip
HELLO FRIENDS
SUPERMAX CI 6000 PLUS NEW 617B 19 MARCH.2005 HERE
http://www.nebutv.com/5512%20(19%20MART%20TPS%20Surprizli).asp
http://free.7host06.com/pakistanforum/NEW%20617B.JPG
http://free.7host06.com/pakistanforum/CAS%20617B.JPG
ENJOY
checked new s/w 617b ,,found very nice with fine colors.
Teletext is working but Cartoon network on 10949 13*e is not working :cry:
masood u still watch cartoon :-O amazing .j/k. can u plz tell me tht wt is the genuine company of supermax its lit bit confusing isn't it?
masood u still watch cartoon :-O amazing .j/k. can u plz tell me tht wt is the genuine company of supermax its lit bit confusing isn't it?Genuine company of Super-CI 6000 Plus is Supermax dear Baba jee.I'm interested in decoding not in viewing :wink:
i ment wid next star & digium 'supermax' is a label only i think this genuinely is turkish brand.
i ment wid next star & digium 'supermax' is a label only i think this genuinely is turkish brand.Next is a label after installing its s/w ,,,it is a clone s/w of supermax.
Some times Turkish Company Next is using Supermax s/w in his STBs and in that case you may call it "label" of supermax.
wahidshah
22-03-2005, 10:52
Masood bhai please find channel data here, thanks to Zahid. _ttp://satlover.wz.cz/viewtopic.php?p=601
I hope this time it will work. Just give it a try.
Wahid
i have installed 617b in supermax but i dont see any diffirence?can u tell me wts new in this software?
KAZIM ALI
22-03-2005, 12:58
SUPERMAX and NEXT is the OEM brand of TECHNOMATE Korea.
www.technomate.com
i have installed 617b in supermax but i dont see any diffirence?can u tell me wts new in this software?We upgraded our STB from an un-official site ,,,now it is available on official site so we should prefer official site always.I'm still awaiting for new s/w for Supermax original company from www.newprog.net.
Satlover has requested me to give him my Supermax so he could work on it :)
Thanks Kazim ali for information.
satlover wants to do some cloning stuf or wot?im just amazed about this .can u plz teach me briefly tht wt is the cloning?and is it possible wid supermax? & humax?it must have some editing software .
satlover wants to do some cloning stuf or wot?im just amazed about this .can u plz teach me briefly tht wt is the cloning?and is it possible wid supermax? & humax?it must have some editing software .
Cloning s/w is released by third party and it is just an experiment,,we don't trust it unless we check it perfectly,,he wants to make clone s/w for supermax stb as well.Yes he has many editors and he wants to do some amendments in Next's s/w to make it Supermax receiver .,,may be he would do that ONLY I feel fear to hand over him my STB :cry:
i think the same masood dont let him try;-)
i think the same masood dont let him try;-)
not like that ,,I will have to sacrifice(qurbaani) my STB for the help of others,,,his STB became dead two times during experiments on Neosat :(
and he is asking me,,,what should I do?I need a good advice :idea:
Dear Masood,
Here is the difference between sw 617a & 617b.The version 617a has no TPS crypt key but the other 617b has and I think when next time TPS will change the tps crypt key,we have to need only new key instead of new sw.To see the tps crypt key,go to cas menu,select Viacess and then select Tps(0x007c00),you will see in left side bottom"TPS crypt Key",press blue button & see it.You may change/edit this key.
P*lsat is down again with 6000CI and mostly in other models.I have checked that stb auto upgrading the right key but ........?
Thanks & regards,
Sultan Gondal
thanks for telling us your deep observation Dear Sultan!
yes Polsat was not updating whereas it was showing "updated" but no signal displays on the TV.We will have to wait for new s/w again,,may be newprog.net could give us new s/w b4 Next 8)
satlover
25-03-2005, 06:14
Dear Masood,
Here is the difference between sw 617a & 617b.The version 617a has no TPS crypt key but the other 617b has and I think when next time TPS will change the tps crypt key,we have to need only new key instead of new sw.To see the tps crypt key,go to cas menu,select Viacess and then select Tps(0x007c00),you will see in left side bottom"TPS crypt Key",press blue button & see it.You may change/edit this key.
P*lsat is down again with 6000CI and mostly in other models.I have checked that stb auto upgrading the right key but ........?
Thanks & regards,
Sultan Gondal
Baba Jii How you change keys ? you Know that last time TPS change its AES key and it was
BE 33 09 DF D0 F1 F1 04 AB 91 A0 F0 46 0D EC 0F
and today polsat change its MECM keys that are
N 7101 E1 PK0 TYP0 83EF14EA60C26C05512CEA7BF437C9B2CECCFC8C138073C837 A846813E4B4D99B100527C54141EA302ABACD41A43F39DA3B5 DE7DD3D9B9FDF3B9F028EE1FF75A
N 7101 N1 PK0 TYP0 6924C91DD5973D356819CC28E858997557A492C28090A781A4 786EA6AF1BB9E20B017BBA7E1EADF48300033FA8E4EC6C7510 CE3CBDC696FCED16693DE5AF7288
N 7101 N2 TYP0 49A9A2000C67EA08B245E57531DDCE53B36C4E42A07D7E69DD BF19C81164DA054EFEEB1C0F1B6F2E04FB294FC6EB444BEF58 808EE7D215AB70D03F8BBB037BA6 :shock:
Dear Members
do some one has new software for Supermax6000ci plus
Polsat Auto
Regards,
Dear Members
do some one has new software for Supermax6000ci plus
Polsat Auto
Regards,Today new s/w for Next will be released,,,s/w for 5518 chip has been released
http://www.nebutv.com/cimodul.asp
gabrielbadea
02-04-2005, 19:10
Hi my friends !
I'm form Romania and I need your help. My receiver is Supermax 6000CI and I want to know something. When I sellect Discovery Turkey , my receiver ask me about BISS key. my receicer can to crack BISS system. I need BISS key to try this . Where I can to find BISS key for discovery turkey from 42 E ?
Thank you a lot for any help !
My best regards !
Hi my friends !
I'm form Romania and I need your help. My receiver is Supermax 6000CI and I want to know something. When I sellect Discovery Turkey , my receiver ask me about BISS key. my receicer can to crack BISS system. I need BISS key to try this . Where I can to find BISS key for discovery turkey from 42 E ?
Thank you a lot for any help !
My best regards !Super-CI 6000 Plus with 617c is not supporting BISS keys at the moments :idea:
wahidshah
04-04-2005, 22:13
Hello everyone,
Well I have Next version software installed in my Supermax 6000CI Plus. Now I want to change it to Supermax original software. When I tried to download boot make 0029 to my reciever. It did download sucessful but after pushing the up botton press when I pluged again it shows the same boot make 0030.
Anyone out there please guide me how to turned my reciever to boot make 0029. Your gauidance is needed.
Thanks in Advance!
Wahid
gabrielbadea
04-04-2005, 22:28
Hi my friends !
I'm form Romania and I need your help. My receiver is Supermax 6000CI and I want to know something. When I sellect Discovery Turkey , my receiver ask me about BISS key. my receicer can to crack BISS system. I need BISS key to try this . Where I can to find BISS key for discovery turkey from 42 E ?
Thank you a lot for any help !
My best regards !Super-CI 6000 Plus with 617c is not supporting BISS keys at the moments :idea:
Thank you very much for your replay ! I understand that ! I will be onest with you and I will tell you that : " I'm waiting for day when supermax 6000CI will support nagra2 and conax cas 7 system. Romanian RDI users know why !!! :) My best regards !
Hello everyone,
Well I have Next version software installed in my Supermax 6000CI Plus. Now I want to change it to Supermax original software. When I tried to download boot make 0029 to my reciever. It did download sucessful but after pushing the up botton press when I pluged again it shows the same boot make 0030.
Anyone out there please guide me how to turned my reciever to boot make 0029. Your gauidance is needed.
Thanks in Advance!
Wahid
After downloading boot make file ,,it shows 0029 in second attempt ,,it is my personal observation.You may download original s/w by the help of SatLINK 2.0 without any harm,,,I did same and it upgraded successfully.
Any how IS Link 1.1C is better loader to download files under windows xp.
Thank you very much for your replay ! I understand that ! I will be onest with you and I will tell you that : " I'm waiting for day when supermax 6000CI will support nagra2 and conax cas 7 system. Romanian RDI users know why !!! :) My best regards !
we are waiting for seca2 keys which could break cyfra+ encryption.
gabrielbadea
05-04-2005, 21:16
Thank you very much for your replay ! I understand that ! I will be onest with you and I will tell you that : " I'm waiting for day when supermax 6000CI will support nagra2 and conax cas 7 system. Romanian RDI users know why !!! :) My best regards !
we are waiting for seca2 keys which could break cyfra+ encryption.
Hi my friend,
I'm waiting also for seca2, becouse i like cyfra+.
zahid235
08-04-2005, 23:54
Hello everyone,
Well I have Next version software installed in my Supermax 6000CI Plus. Now I want to change it to Supermax original software. When I tried to download boot make 0029 to my reciever. It did download sucessful but after pushing the up botton press when I pluged again it shows the same boot make 0030.
Anyone out there please guide me how to turned my reciever to boot make 0029. Your gauidance is needed.
Thanks in Advance!
Wahid
Hello WahidShah!
I have a same problem download sucessful but after press the up botton I pluged again it shows the same boot make 0030 All loaders like SuperLINK2.0,IS_Link11B,IS_Link1.1c and IS_Link1.1t try but invain ......
All Dear viewers!
Its problem has any solution?
Advanced very thankful
Zahid Masood
vBulletin® v3.8.1, Copyright ©2000-2010, Jelsoft Enterprises Ltd.